Konig CMP-MOBDOCK50 Handleiding

Konig Cradle/docking station CMP-MOBDOCK50

Lees hieronder de 📖 handleiding in het Nederlandse voor Konig CMP-MOBDOCK50 (30 pagina's) in de categorie Cradle/docking station. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/30

CMP-MOBDOCK50

MANUAL (p. 2)

S-ATA HDD CLONING DOCK

ANLEITUNG (S. 4)

S-ATA HDD CLONE-DOCKINGSTATION

MODE D’EMPLOI (p. 6)

STATION DE CLONAGE DE DISQUES DURS

S-ATA

GEBRUIKSAANWIJZING (p. 8)

S-ATA HDD KLOON-DOCK

MANUALE (p. 10)

DOCK PER CLONAZIONE HDD S-ATA

MANUAL DE USO (p. 12)

ESTACIÓN DE CLONACIÓN DE DISCOS

UROS S-ATA

HASZNÁLATI ÚTMUTATÓ (o. 14.)

SATA MEREVLEMEZ KLÓNOZÓ KÄYTTÖOHJE (s. 16)

S-ATA HDD KLOONAUSTELAKKA

BRUKSANVISNING (s. 18)

S-ATA HDD DOCKNING FÖR KLONING

NÁVOD K POUŽITÍ (s. 20)

SATA HDD KLONOVACÍ DOKOVACÍ STANICE

MANUAL DE UTILIZARE (p. 22)

STAŢIE DE ANDOCARE ŞI CLONARE PENTRU

HDD S-ATA

ΕΓΧΕΙΡΙΔΙΟ XPHΣ ΣH (σελ. 24)

ΣΤΑΘΜΟΣ ΚΛΩΝΟΠΟΙΗΣΗΣ ΣΚΛΗΡΩΝ

ΙΣΚΩΝ S-ATA

BRUGERVEJLEDNING (s. 26)

S-ATA HDD KLON DOK VEILEDNING (s. 28)

S-ATA HDD KLONINGSDOCK

ENGLISH

S-ATA HDD CLONING DOCK

Installation:

Front view

Power on/off button

Duplicate button

Back view

DC input USB e-SATA

Duplicator mode

Connect the external power adapter to the hard drive dock.

Install 2 hard disks into the dock. Be sure to place the drive with data you want to copy into the “source” bay.

The other hard disk must be put into the “destination” bay.

This disk must be equal or larger than the “source” hard disk.

Press the power button. The Mode LED will go on.

Once both drives are installed, press the “duplicate start” button. The mode LED will be flashing, wait for

5 seconds; the mode LED will go out and then press the start button again to confirm the duplication process.

You will see the HDD’s active LED flashing until the whole duplication is complete. When the duplication is

successfully finished, all the LEDs go out.

LED indication

Power

Target HDD

Source HDD

Power

Safety precautions:

To reduce risk of electric shock, this product should ONLY be

opened by an authorized technician when service is required.

Disconnect the product from mains and other equipment if a

problem should occur. Do not expose the product to water or

moisture.

Maintenance:

Clean only with a dry cloth. Do not use cleaning solvents or abrasives.

Warranty:

No guarantee or liability can be accepted for any changes and modifications of the product or damage caused

due to incorrect use of this product.

General:

Designs and specifications are subject to change without notice.

All logos brands and product names are trademarks or registered trademarks of their respective holders and

are hereby recognized as such.

Keep this manual and packaging for future reference.

Attention:

This product is marked with this symbol. It means that used electrical and electronic products should

not be mixed with general household waste. There is a separate collections system for these products.

Product specificaties

Merk:	Konig
Categorie:	Cradle/docking station
Model:	CMP-MOBDOCK50
Breedte:	160 mm
Diepte:	102 mm
Hoogte:	82 mm
Aantal USB 2.0-poorten:	1
Opslagmedia-type:	HDD
Ondersteunt Mac-besturingssysteem:	Ja
Ondersteunt Linux:	Ja
Standaard interfaces:	eSATA,USB 2.0
Max. overdrachtssnelheid:	3 Gbit/s
Opslag schijf-interface:	Serial ATA,Serial ATA II
Maximale opslagcapaciteit:	3 TB
Chipset:	JMB352
Aantal storage drives ondersteund:	2
Opslagschijf afmetingen ondersteund:	2.5,3.5 "
Aantal eSATA-poorten:	1