Konig CMP-MOBDOCK40 Handleiding

Konig Cradle/docking station CMP-MOBDOCK40

Lees hieronder de 📖 handleiding in het Nederlandse voor Konig CMP-MOBDOCK40 (44 pagina's) in de categorie Cradle/docking station. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/44

CMP-MOBDOCK40

MANUAL (p. 2)

USB 3.0 2.5”/3.5” HDD DOCK

ANLEITUNG (S. 5)

USB 3.0 2,5”/3,5” HDD DOCKINGSTATION

MODE D’EMPLOI (p. 8)

STATION HDD USB 3.0 2,5”/3,5”

GEBRUIKSAANWIJZING (p. 11)

USB 3.0 2,5”/3,5” HDD DOCK

MANUALE (p. 14)

STAZIONE HDD 2,5”/3,5” USB 3.0

MANUAL DE USO (p. 17)

PUERTO USB 3.0 2,5”/3,5” HDD

HASZNÁLATI ÚTMUTATÓ (o. 20.)

USB 3.0 2,5”/3,5” HDD DOKKOLÓ

KÄYTTÖOHJE (s. 23)

USB 3.0 2,5”/3,5” HDD -TELAKKA

BRUKSANVISNING (s. 26)

USB 3.0 2,5”/3,5” HDD DOCK

NÁVOD K POUŽITÍ (s. 29)

USB 3.0 DOKOVACÍ STANICE PRO 2,5”/3,5” HDD

MANUAL DE UTILIZARE (p. 32)

STAŢIE DE ANDOCARE HDD USB 3.0 DE 2,5”/3,5”

ΕΓΧΕΙΡΙΔΙΟ XPHΣ ΣH (σελ. 35)

Σταθμός σύνδεσης για μονάδες σκληρών

ίσκων 2,5”/3,5” USB 3.0

BRUGERVEJLEDNING (s. 38)

USB 3.0 2,5”/3,5” HDD DOCK

VEILEDNING (s. 41)

USB 3.0 2,5”/3,5” HDD DOCK

ENGLISH

USB 3.0 2.5”/3.5” HDD DOCK

Introduction

This SATA Drive Dock offers a USB 3.0 SuperSpeed transmission rate of up to 5 Gbps. The computer is

capable of reading and writing to the external drive at its maximum speed, but it is also backward compatible

with the USB 2.0 host controller of your computer. (Using a USB 3.0 host controller is recommended.)

The drive dock is plug and play. One Touch Back-up feature allows users to copy files from their PC to the

external drive.

Main Feature

- Supports 2.5”/3.5” SATA HDD

- USB 3.0 transfer rate of up to 5 Gbps

- Hot swappable; Plug and Play

- Back-up software for quick data copy

Minimum System Requirements

Works with Windows® XPx86/ XPx64/ Vista x86/ Vista x64/Win 7 x86/ Win 7 x64

Note: Windows system has to be with NEC USB3.0 Host.

Take a look to the CMP-MOBDOCK40

1 One Touch Backup Button 4 USB3.0 Connector

2 5 HDD Access LED Power DC Jack

3 6 Power LED Power Switch

Assembly

Insert the hard drive

• Steps 1 & 2: The docking supports 2.5” or 3.5” SATA HDD. Directly plug the hard disk into the SATA

connector, as shown below in photos 1 and 2

• Step 3 & 4: You can easily hot-swap the HDD by directly pulling it out of the docking station, as shown

below in photos 3 and 4

Starting Using CMP-MOBDOCK40

After installing the drive into the docking station, attach the power adapter and turn on the power switch to

start using the external drive. The CMP-MOBDOCK40 supports driverless installation in Windows® XP, Vista

and 7; just plug and play.

Note: USB 3.0 standard is compliant with Windows® XP, Vista, 7; further compatibility of other OS or system

may be updated without prior notice by their manufacturers.

Formatting the Hard Disk

The entire drive has to be formatted before use. If using a drive which has been formatted before, there is no

need to format again. Follow the steps below:

1. Right click My Computer and select Manage

2. Management window will show up. Click Disk Management under Storage

3. Computer Management window will list all the disks in the computer

4. Right click on partition disk and click New Partition

5. New Partition Wizard will show up, click Next

6. Select the Primary partition or Extended partition that you want, click Next

7. Fill in the numbers of capacity that you prefer to partition, click Next

Note: Format tool was provided by Windows®, the maximum capacity of FAT32 is 32 GB.

8. Select Assign the following drive letter, click Next

9. Select Format this partition with the following settings and choose the File system that you want

10. You can enter the Volume label that you want. Choose perform a quick format, click Next

11. You can see a new partition in the Disk Management

12. The new disk can be seen on the computer

Product specificaties

Merk:	Konig
Categorie:	Cradle/docking station
Model:	CMP-MOBDOCK40
Kleur van het product:	Zwart
Opslagmedia-type:	HDD
Standaard interfaces:	USB 3.2 Gen 1 (3.1 Gen 1)
Max. overdrachtssnelheid:	5 Gbit/s
Opslag schijf-interface:	SATA
Maximale opslagcapaciteit:	3 TB
Aantal USB 3.2 Gen 1 (3.1 Gen 1)-poorten:	1
Aantal storage drives ondersteund:	1
Opslagschijf afmetingen ondersteund:	2.5,3.5 "