Konig Electronic CMP-BLUEHS20 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Konig Electronic CMP-BLUEHS20 (58 pagina's) in de categorie Hoofdtelefoon. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/58
CMP-BLUEHS20
MANUAL (p. 2)
Stereo Bluetooth Design Headset
MODE D’EMPLOI (p. 10)
Casque Stéréo Bluetooth® Design
MANUALE (p. 18)
Cuffia stereo Bluetooth®
BRUKSANVISNING (s. 34)
Stereo Bluetooth® Designheadset
MANUAL DE UTILIZARE (p. 42)
Headset Design stereo cu Bluetooth®
BRUGERVEJLEDNING (p. 50)
Stereo Bluetooth® Design Headset
HASZNÁLATI ÚTMUTATÓ (o. 26.)
Sztereo Bluetooth® design headset
KÄYTTÖOHJE (s. 30)
Muotoillut Bluetooth®-stereokuulokkeet
ANLEITUNG (s. 6)
Stereo Bluetooth® Design Kopfhörer
GEBRUIKSAANWIJZING (p. 14)
Stereo Bluetooth® Design Hoofdtelefoon
MANUAL DE USO (p. 22)
Auriculares Estéreo de diseño Bluetooth®
NÁVOD K POUŽITÍ (s. 38)
Bluetooth® stereo sluchátka Design s
mikrofonem
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 46)
Στερεοφωνικά Ακουστικά Bluetooth®
VEILEDNING (p. 54)
Stereo Bluetooth® design-hodesett
2
ENGLISH
Charging the headset
Before using for the rst time, please charge the battery for a minimum of 4 hours. Repeat this three times.
You can charge the headset with the USB cable. When the red light is on, the headset is charging. When the
red light is off, the battery of the headset is full.
When you hear three warning tones every 30 seconds and the red LED blinks two times, it means the battery
power is low and the battery needs to be charged.
Overview
1.) retractable string
2.) < key: last song
3.) > key: next song
4.) LED indicator
5.) multifunction button (MFB): switch the headset on/off, answer, end, and reject call, mute microphone,
voice dial and voice transfer, redial last number, pause and play
6.) + key: volume up
7.) – key: volume down
8.) charging port
9.) built-in microphone
Usage of the CMP-BLUEHS20
1. Switching the headset on/off
Function Operation LED indicator Indication tone
Switch on the headset Press O the for 3-5 seconds,
and release until the blue LED
blinks
The blue LED blinks quicklin
every 4 seconds4s a time
One tone
Switch off the headset Press O the for 3-5 seconds,
and release until the red LED
blinks
The red LED blinks quickly in
every 4 seconds4s a time
One tone
Remarks:
* The headset will switch off automatically if no device is connected after 5 minutes in order to save power.
3
2. Pairing the headset with Bluetooth devices
2.1. How to enter the pairing mode
Function Operation LED indicator Indication tone
Enter into pairing
mode
First, make sure the headset
is off. Press O for 5-7 seconds
and release until the red and
blue LEDs blink alternately
The red and blue LEDs blink
alternately
Two tones
Note:
* The pairing mode will last 2 minutes. If the headset still cannot pair with any Bluetooth devices, it will
automatically switch into standby mode.
2.2. Pairing the headset with a Bluetooth mobile phone
Please make sure your mobile phone has a Bluetooth function.
Specic pairing procedures may vary with different mobile phones. Please refer to your mobile phones’
manual for further information. The steps are as follows:
a. Please keep the headset and mobile phone within 1 metre of each other when pairing
b. Make the headset enter the pairing mode (please refer to 2.1)
c. Switch on the Bluetooth function of the mobile phone and search for Bluetooth devices. When the search
is completed, select the headset in the Bluetooth device list.
d. When prompted, enter PIN No: “0000” as the password and press “Yes” or “Confirm”.
e. After pairing the devices successfully, select the headset in the Bluetooth device list and press “Connect”.
f. If the connection is successful, the blue (or red) LED of the headset blinks twice every 4 seconds.
Note:
* If the pairing is not successful, please switch off headset rst then try to pair them again according to the
steps mentioned above.
* After pairing, the devices will remember each other.
* The headset will connect with the last paired device. If you want to pair it with other Bluetooth devices,
please switch off the Bluetooth function of the current Bluetooth device, then pair and connect the new
Bluetooth device according to steps mentioned above.
3. Pairing the headset with a Bluetooth transmitter
You can enjoy music wirelessly by connecting the headset with a stereo Bluetooth transmitter. See the
manual of your transmitter for more details.
4. Making a call with the headset
Function Status of the headset Operation Indicator tone
Voice dial Standby mode Press O for 2 seconds
and release until a tone is
heard
A long tone
Redial last number Standby mode Briey press O twice A long tone
Volume up Conversation mode Briey press + and then
release (or hold) it
None
Volume down Conversation mode Briey press – and then
release (or hold) it
None
Answer call Ringing Briefy press OA short tone
Reject call Ringing Press O for 2 seconds
and release until a tone is
heard
A short tone
End call Conversation mode Briey press OA short tone
Switch conversation
between headset and
mobile phone
Conversation mode Press O for 2 seconds
and release until a tone is
heard
A short tone


Product specificaties

Merk: Konig Electronic
Categorie: Hoofdtelefoon
Model: CMP-BLUEHS20

Heb je hulp nodig?

Als je hulp nodig hebt met Konig Electronic CMP-BLUEHS20 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hoofdtelefoon Konig Electronic

Handleiding Hoofdtelefoon

Nieuwste handleidingen voor Hoofdtelefoon