Konica Minolta Vectis GX-3 Handleiding

Konica Minolta Niet gecategoriseerd Vectis GX-3

Lees hieronder de 📖 handleiding in het Nederlandse voor Konica Minolta Vectis GX-3 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 148 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

FOR PROPER AND SAFE USE

WARNING

OPERATING TEMPERATURE AND CONDITIONS

• This camera is designed for use from -10 to 40°C (14 to

104°F).

• Never leave your camera where it may be subjected to extreme

temperatures such as inside the glove compartment of a car.

• At colder temperatures, the data panel response time will be

slow. At higher temperatures, the display may temporarily

darken, but will restore when the temperature normalizes.

• Never subject the camera to extreme humidity.

• To prevent condensation from forming, place the camera in a sealed plastic bag

when bringing it from the cold exterior into a warm building. Allow it to come to

room temperature before removing it from the bag.

• When photographing in cold weather, keep the camera and spare batteries inside

your coat to keep them warm when you are not shooting. Cold batteries will regain

some of their charge when they warm up.

FILM CASSETTE WARNING

The film used in Advanced Photo System cameras stores some data magnetically.

Do not place the film cassette on or near anything that creates a magnetic field, such

as a television or stereo speakers.

CAMERA ERROR

If the camera will not function with fresh batteries, remove the batteries, wait a few

minutes, then reinsert the batteries. If normal operation does not resume, or the

camera malfunctions repeatedly, contact an authorized Minolta Service Facility.

THIS CAMERA IS SPLASHPROOF AND CAN BE USED IN LIGHT RAIN OR SNOW.

• Do not place the camera under running water or immerse.

Please Note:

1. When using the camera outdoors in heavy rain, keep the camera protected from

the rain. Do not leave the camera in the rain.

2. The interior of the camera is not water resistant.

- Dry the camera before opening the film or battery chambers.

- When inserting or removing film or batteries, keep your hands dry.

3. Do not load film or replace batteries in places where water, blowing sand, or dust

can enter the camera.

4. This camera is not sandproof, do not place the camera directly

on the ground.

5. Do not expose the camera to salt water or liquids containing

sugar.

6. Close the film and battery chamber covers tightly. Clean the

rubber seals before closing covers.

7. If the rubber seals appear cracked or damaged, contact an authorized Minolta

Service Facility to have them replaced.

8. Do not subject the camera to shock or impact.

EINSTRUCTION MANUAL

Universal Copyright Convention

Read and understand all warnings and cautions before using this product.

Batteries may become hot or explode due to improper use.

• Use only the batteries specified in this instruction manual.

• Do not install the batteries with the polarity (+/–) reversed.

• Do not subject batteries to fire or high temperatures.

• Do not attempt to recharge, short, or disassemble.

• Tape over lithium battery contacts before disposal. Follow local codes for

battery disposal.

Use caution, accidents may occur when using this product near young children.

Keep batteries or things that could be swallowed away from young children.

Contact a doctor immediately if an object is swallowed.

Immediately remove the batteries and discontinue use if...

• the camera is dropped or subjected to an impact in which the interior is

exposed.

• the product emits a strange smell, heat, or smoke.

Do not disassemble. Electric shock may occur if a high voltage circuit inside the

camera is touched. Take your camera to a Minolta Service Facility when repairs

are required.

Attaching

Insert the strap tab into the strap port until it

“clicks.”

Removing

Press the strap release and pull the tab out of

the strap port.

ATTACHING AND REMOVING THE STRAP

9222-2281-11 T-B801

Minolta Co., Ltd. 3-13, 2-Chome, Azuchi-Machi, Chuo-Ku, Osaka 541-8556, Japan

Minolta GmbH Kurt-Fischer-Strasse 50, D-22923 Ahrensburg, Germany

Minolta France S.A. 365 Route de Saint-Germain, F-78420 Carrieres-Sur-Seine, France

Minolta (UK) Limited Rooksley Park, Precedent Drive, Rooksley, Milton Keynes, MK13 8HF, England

Minolta Austria Ges. m.b.H. Amalienstrasse 59-61, A-1131 Wien, Austria

Minolta Camera Benelux B.V. Zonnebaan 39, P.O. Box 6000, NL-3600 HA Maarssen, The Netherlands

Belgium Branch Kontichsesteenweg 38, B-2630 Aartselaar, Belgium

Minolta (Schweiz) AG Riedstrasse 6, CH-8953 Dietikon, Switzerland

Minolta Svenska AB P.O.Box 9058, Albygatan 114, S-17109 Solna, Sweden

Finland Branch Niittykatu 6 PL 37, SF-02201 Espoo, Finland

Minolta Portugal Limitada Av. do Brasil 33-A, P-1700 Lisboa, Portugal

Minolta Corporation

Head Office 101 Williams Drive, Ramsey, New Jersey 07446, U.S.A.

Los Angeles Branch 11150 Hope Street Cypress, CA 90630, U.S.A.

Minolta Canada Inc.

Head Office 369 Britannia Road East, Mississauga, Ontario L4Z 2H5, Canada

Vancouver Branch 230-3771 Jacombs Road, Richmond, B.C. V6V 2L9, Canada

Minolta Hong Kong Limited Room 208, 2/F, Eastern Center, 1065 King’s Road, Quarry Bay, Hong Kong, China

Minolta Singapore (Pte) Ltd. 10, Teban Gardens Crescent, Singapore 608923

Shanghai Minolta Optical

Products Co., Ltd. 368 Minolta Road, Songjiang, Shanghai, China

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modifications not approved by the party responsible for compliance could void

the user's authority to operate the equipment. This equipment has been tested and found to

comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.

Thank you for purchasing a Minolta Advanced Photo System™ camera. To take part

in your active lifestyle, this camera was designed to be rugged and easy to use.

Before using your camera, familiarize yourself with the names and locations of the

camera controls and read this manual thoroughly.

*Advanced Photo System™ is a trademark of the five system developing companies,

including Minolta

Advantages of the Advanced Photo System

New print formats…

Classic C print, wider H print, and panorama P print

formats are available with Advanced Photo System

cameras.

Easier to load…

Advanced Photo System cameras use the new IX240 type film. This new film

features drop-in-loading to make loading your camera simple, the first time, every

time. Indicators on the cassette tell you and your camera if the film is unexposed,

partially exposed, exposed, or processed.

New processing…

In addition to returning your prints in the format

you selected, certified photofinishers will return

your Advanced Photo System film in its original

cassette with an index print. To order reprints,

simply choose the images you want from the

index print. No more searching through negatives

to find the right frame.

NAMES OF PARTS

Camera Body

Shutter-release button

Film-chamber release

Release lock

Film chamber

Data panel

Flash*

Lens* Command switch

Strap port

Battery chamber

Viewfinder*

Viewfinder window*

Accessory port

* Do not touch

Data Panel Image Frames

H print

Flash charging indicator

Frame counter

Shutter-release button

Data panel

Flash*

Lens* Command switch

Viewfinder window*

Shutter-release button

Data panel

Flash*

Lens*

Command switch

Viewfinder window*

Battery warning

Command switch

P P print (Panorama)

H H print

C C print (Classic)

OFF Camera off

Self-timer

C print

P print

GX-1 GX-2 GX-3

Film-chamber release

Release lock

Film chamber

Strap port

Battery chamber

Viewfinder*

Accessory port Film-chamber release

Release lock

Film chamber

Strap port

Battery chamber

Viewfinder*

Accessory port

LOADING FILM

Use IX240 (Advanced Photo System) type film in this camera.

• ’Your camera s transport system loads the film and advances the film after each

exposure.

•Do not open the film chamber until 0 appears or all indicators blink in the data panel.

•Install the battery before loading the film, or the film will not advance to the first frame.

•We recommend you use ISO 200 film in this camera.

Visual Exposure Indicators (VEI)

• The current VEI has a white indicator behind it.

VEI MEANING

UNEXPOSED

PARTIALLY EXPOSED

EXPOSED

PROCESSED

• Your camera can only load unexposed film ( ).

INSTALLING THE BATTERY

1. Using a coin or similar object, turn the

battery-chamber lock to open, then open the

battery-chamber door.

2. Insert a new battery into the chamber as

indicated by the + and - marks.

3. Close the battery-chamber door and turn the

battery-chamber lock to the close position.

•Clean the rubber seals and joining surfaces before

closing covers.

TAKING PICTURES

1. Turn the command switch to the desired print

format.

Hold the camera steady, making

sure your fingers do not cover

the flash. If you are taking a

vertically framed picture, turn the

camera so the flash is on top.

Battery Warning

Replace the battery.

•If no display appears, replace the battery or make sure it is correctly installed.

•Do not remove the battery unless the battery warning blinks or no display

appears in the data panel.

•If the data panel dims after the flash fires, the battery will need to be

replaced soon.

•Your camera will shut down if it is not operated for more than three minutes.

To restore power, turn the command switch to OFF, then back to P, H, C, or

Loading Film

1. Turn the camera upside down, then press the

release lock and turn the film-chamber

release.

•The film-chamber door will unlock.

•Wipe dirt or moisture off of the camera and film

cassette before opening the film chamber.

2. Open the film-chamber door and insert a new

film cassette into the film chamber.

3. Press the film-chamber door closed and turn

the film-chamber release to the lock position.

•The film cassette may be damaged if the film-chamber

release is moved when the film-chamber door is open.

4. Turn the command switch to C, H, or P.

5. Press the shutter-release button.

•The film will advance to the first frame.

•The frame counter displays the number of exposures

remaining on the roll.

•If all indicators blink in the data panel, the film has not

loaded. Remove and reload the film cassette.

2. Frame your subject(s) in the image frame for

the selected print format.

3. Press the shutter-release button to take the

picture.

•Keep your subject at least 1.0m (3.3 ft.) from the

camera.

• –With ISO 200 film, the flash has a range of 1.0 3.0m

(3.3 9.8 ft.) and will fire when necessary.–

• ’You can t take a flash picture when blinks in the

data panel (flash charging).

4. Turn the command switch to off when the

camera is not in use.

After the last exposure is taken, “0” will appear in the data panel.

When the motor stops, open the film chamber and remove the film.

•Remove your film immediately after rewinding. Film left in the camera may

reload causing double exposures.

Your camera uses one 3-volt CR2 lithium battery to supply power for all camera

operations. Please read the warnings in the Safety Cautions section of this manual

as well as those supplied by the battery manufacturer.

•If film is in the camera when the battery is replaced, install a new battery immediately

after removing the old battery. If the battery is not replaced immediately, your camera

may advance one frame and display - - in the frame counter for the remaining

exposures. The frame counter will return to normal operation when a new film cassette

is loaded.

Product specificaties

Merk:	Konica Minolta
Categorie:	Niet gecategoriseerd
Model:	Vectis GX-3

Heb je hulp nodig?

Als je hulp nodig hebt met Konica Minolta Vectis GX-3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Konica Minolta

Konica Minolta Hi-Matic 7S II Handleiding

15 Augustus 2023

Konica Minolta Dynax 700Si Handleiding

19 Juli 2023

Konica Minolta Dynax 9Xi Handleiding

19 Juli 2023

Konica Minolta Dynax 404Si Handleiding

19 Juli 2023

Konica Minolta Dynax 800Si Handleiding

19 Juli 2023

Konica Minolta Dynax 500Si Super Handleiding

19 Juli 2023

Konica Minolta SR-T 303 Handleiding

19 Juli 2023

Konica Minolta Dynax 500Si Handleiding

18 Juli 2023

Konica Minolta Dynax 303Si Handleiding

18 Juli 2023

Konica Minolta Dynax 60 Handleiding

18 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024

Kramer K-Bar Camera Bracket Handleiding

26 November 2024

Kramer RK-19 Handleiding

26 November 2024

Kramer OSP-MM1 Handleiding

26 November 2024

Kramer ASPEN-1616UX Handleiding

26 November 2024

Korg Pitchstrap Handleiding

26 November 2024

NeoMounts WL70-450BL11 Handleiding

26 November 2024

Kramer CLS-AOCH/60 Handleiding

26 November 2024

Klauke EKM 6022ISM Handleiding

26 November 2024