Konica Minolta Vectis 200 Handleiding

Konica Minolta Niet gecategoriseerd Vectis 200

Lees hieronder de 📖 handleiding in het Nederlandse voor Konica Minolta Vectis 200 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 190 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
NAMES OF PARTS
FRONT
15. Format switch
16. Viewnder*
17. Ready lamp
18. Zoom lever
19. Strap eyelet
20. Film-chamber door
21. Film-chamber release
22. Tripod socket
23. Battery-chamber door
*Do not touch
BACK
DATA PANEL
1. Title/Date/Time/ISO display
2. Title marks
3. Battery-condition indicator
4. Frame counter
5. Self-timer indicator
6. Cassette mark
7. Flash-mode indicators
1. Focus frame
2. Close-framing guide
3. Ready lamp
VIEWFINDER
Attach the strap as shown.
Minolta Co., Ltd. 3-13, 2-Chome, Azuchi-Machi, Chuo-Ku, Osaka 541-8556, Japan
Minolta GmbH Kurt-Fischer-Strasse 50, D-22923 Ahrensburg, Germany
Minolta France S.A. 365 Route de Saint-Germain, F-78420 Carrieres-Sur-Seine, France
Minolta (UK) Limited Rooksley Park, Precedent Drive, Rooksley, Milton Keynes, MK13 8HF, England
Minolta Austria Ges. m.b.H. Amalienstrasse 59-61, A-1131 Wien, Austria
Minolta Camera Benelux B.V. Zonnebaan 39, P.O. Box 6000, NL-3600 HA Maarssen, The Netherlands
Belgium Branch Kontichsesteenweg 38, B-2630 Aartselaar, Belgium
Minolta (Schweiz) AG Riedstrasse 6, CH-8953 Dietikon, Switzerland
Minolta Svenska AB P.O.Box 9058, Albygatan 114, S-17109 Solna, Sweden
Finland Branch Niittykatu 6 PL 37, SF-02201 Espoo, Finland
Minolta Portugal Limitada Av. do Brasil 33-A, P-1700 Lisboa, Portugal
Minolta Corporation
Head Office 101 Williams Drive, Ramsey, New Jersey 07446, U.S.A.
Los Angeles Branch 11150 Hope Street Cypress, CA 90630, U.S.A.
Minolta Canada Inc.
Head Office 369 Britannia Road East, Mississauga, Ontario L4Z 2H5, Canada
Vancouver Branch 230-3771 Jacombs Road, Richmond, B.C. V6V 2L9, Canada
Minolta Hong Kong Limited Room 208, 2/F, Eastern Center, 1065 King’s Road, Quarry Bay, Hong Kong, China
Minolta Singapore (Pte) Ltd. 10, Teban Gardens Crescent, Singapore 608923
Shanghai Minolta Optical
Products Co., Ltd. 368 Minolta Road, Songjiang, Shanghai, China
© 1997 Minolta Co., Ltd. under the Berne Convention and
Universal Copyright Convention
9222-2211-31 W-B801 Printed in China
*Do not touch
EInstruction Manual
ATTACHING THE STRAP
FOR PROPER AND SAFE USE
Read and understand all warnings and cautions before using this product.
WARNING
Batteries may become hot or explode due to improper use.
• Use only the batteries specied in this instruction manual.
• Do not install the batteries with the polarity (+/–) reversed.
• Do not subject batteries to re or high temperatures.
• Do not attempt to recharge, short, or disassemble.
• Tape over lithium battery contacts before disposal. Follow local codes
for battery disposal.
Use caution, accidents may occur when using this product near young
children.
Keep batteries or things that could be swallowed away from young
children. Contact a doctor immediately if an object is swallowed.
Immediately remove the batteries and discontinue use if...
• the camera is dropped or subjected to an impact in which the interior is
exposed.
• the product emits a strange smell, heat, or smoke.
The lens retracts when the camera is turned o or Auto Power O is
activated. Touching the lens barrel while it is retracting may cause injury.
Do not disassemble. Electric shock may occur if a high voltage circuit
inside the camera is touched. Take your camera to a Minolta Service
Facility when repairs are required.
OPERATING TEMPERATURE AND CONDITIONS
• This camera is designed for use for -10 to 40°C (14 to 104°F).
• Never leave your camera where it may be subjected to extreme
temperatures such as the glove compartment of a car.
• At colder temperatures, the data panel response time will be slow; at
higher temperatures, the display will temporarily darken, but will
restore when the temperature normalizes.
• Never subject your camera to extreme humidity.
• To prevent condensation from forming, place the camera in a sealed
plastic bag when bringing it from the cold exterior to a warm building.
Allow it to come to room temperature before removing it from the bag.
• When photographing in cold weather, we recommend that you keep
the camera and spare batteries inside your coat to keep them warm
when you are not shooting. Cold batteries will regain some of their
charge when they warm up.
• This camera is not waterproof, dust-proof, or sand-proof; take care
when using it at the beach or near water. Costly or irreparable damage
may occur.
Thank you for your purchase of a Minolta product. Your new camera is
an easy to operate lens shutter camera from Minolta's line of Advanced
Photo System™ cameras. Your new light-weight, compact camera
features title imprinting, lm-chamber lock, and a 25-50mm zoom lens.
This manual has been designed to help you understand the operation
of your camera and its functions. Please familiarize yourself with the
names of the controls and their locations on the camera, then read this
manual thoroughly.
New processing…
In addition to returning your prints in the format
you selected, certied photonishers will return
your Advanced Photo System lm in its original
cassette with an index print. To order reprints,
simply choose the images you want from the
index print. No more searching through negatives
to nd the right frame.
Advanced Photo System™ is a trademark of the
ve system developing companies.
Easier to load…
Advanced Photo System cameras use the new
IX240 type lm. This new lm features drop-in-
loading to make loading your camera simple, the
rst time, every time. Indicators on the cassette
tell you and your camera if the lm is unexposed,
partially exposed, exposed, or processed.
Advantages of the Advanced Photo System
New print formats…
Classic C print, wider H print, and panorama P print formats are available with
Advanced Photo System cameras.
1. Shutter-release button
2. Title button
3. Date button
4. Data panel
5. Self-timer/Select button
6. Flash-mode/Adjust button
7. Manual-rewind button
8. Flash*
9. Viewnder window*
10. Lens*
11. Meter window*
12. AF windows*
13. Front cover
14. Self-timer/Red-eye reduction lamp
Ready lamp with the shutter-release button pressed half-way down.
Glows: Camera is ready
Blinks quickly: Subject is too close
Blinks slowly: Camera-shake warning
O: Flash is charging
Step
1 2 3
15 16 17 18*
19
1234567
7 6 5 4
1 2 3
11*
8*
9*
10*
14
13
12*
23 22 21 20
Step
FULL AUTO OPERATION-CONTINUED
Step
2. Insert the battery according to the + and –
marks inside the battery chamber and
snap the cover closed.
• After installing a new battery, reset the date and time.
Each time the camera is turned on, a symbol will appear briey in the data
panel to indicate the power status of the battery.
Power is sucient for all camera operations.
Power is sucient, but the battery will have to be
replaced soon.
Replace the battery. The shutter will lock until the battery
is replaced.
Your camera uses IX240 type film designed for use in Advanced Photo System
cameras.
• Your camera’s automatic transport system loads the lm, sets the lm speed, and
advances the lm after each exposure.
• After loading, the lm chamber cannot be opened until rewind has been initiated.
• DEP, Double Exposure Prevention, prevents the camera from accepting exposed lm.
• This camera will only load lm with the mark current.●
Visual Exposure Indicators
• The current VEI has a white indicator
behind it.
Hold the camera steady, making sure your
ngers do not cover the ash. If you are taking
a vertically framed picture, turn the camera so
the ash is on top.
3. Looking through the viewnder, frame the
subject as desired.
Push the zoom lever toward W to zoom out.
Push the zoom lever toward T to zoom in.
• Do not obstruct the lens barrel during movement.
4. Center your subject in the focus frame, then
press the shutter-release button partway
down.
6. Turn the camera o after use by sliding the
front cover closed.
If your subject is located outside the focus frame, you can rst lock focus on
your subject, then recompose the picture as desired.
Your camera automatically rewinds the lm into the cassette after the last
exposure.
MANUAL REWIND
CHECKING THE BATTERY POWER
FOR CLOSER SUBJECTS
1. Align the subject within the focus frame and
press the shutter-release button partway
down until the ready lamp glows.
2. Without lifting your nger, recompose the
picture then press the shutter-release
button all the way down to take the picture.
FOCUS LOCK
1. Wait for the lm to completely rewind into the
cassette.
• The frame counter will count down during rewind.
• will appear in the frame counter and will blink
when thelm is rewound.
INSERTING THE BATTERY
REWINDING THE FILM
Your camera uses one 3-volt CR2 lithium battery
to supply power for all camera operations.
1. Open the battery-chamber door
using a coin or similar object.
1. Turn the camera upside down and push
the film-chamber release in the direction
indicated.
• The lm-chamber door will open partway.
2. Insert the cassette into the film chamber.
Use manual rewind to rewind the lm before the roll is nished.
• If no display appears, replace the battery or check that it is inserted correctly.
• To save power, your camera will shut down and retract the lens if it is not operated for
more than eight minutes. Close, then open the front cover again to restore power.
When your subject is closer than 1.0m/3.28ft., align the top of your image with
the close-framing guide, using focus hold if necessary.
• The close-framing guide is not visible in P format.
The ready lamp will blink rapidly and the shutter will lock when you are closer
than the focus distance indicated below.
Focal Length Wide Telephoto
Print Format All C or H P
Focus Distance 0.5m - ∞ 0.5m - ∞ 1.0m - ∞
(1.64ft. - ∞) (1.64ft. - ∞) (3.28ft. - ∞)
5. When the green ready lamp glows, press
the shutter-release button all-the-way down
to take the picture.
• Press the shutter-release button with a slow, steady
squeeze, never a quick jab.
LOADING THE FILM
Step
VEI MEANING
3. Press the film-chamber door closed until it
clicks.
• The camera will automatically advance the film to the
first frame.
• The ISO (film speed) and number of frames remaining on the roll
will be displayed in the data panel.
• Film can be loaded when the camera is on or o.
• Iflm is loaded with the camera o, all indicators in the data
panel will disappear after the number of frames remaining is
displayed.
• Do not loadlm without an operational battery in the camera.
If blinks in the data panel, open the chamber, then
remove the lm.
- Your camera cannot load a cassette if the current VEI is , , or ◗ ✖ ■.
- If a processed (VEI ) or partially exposed (VEI ) cassette was■◗
loaded into this camera, the VEI has been changed to .✖
• If all indicators blink in the data panel, remove and reload the film. If
the film will not load, contact the nearest authorized Minolta Service
Facility.
Step
FULL AUTO OPERATION
1. Open the front cover to turn the camera on.
• The ash is set to autoash and will re when necessary.
2. Select the print format. The viewnder will
change to match your selection.
2. Turn the camera upside down and push the
lm-chamber release in the direction
indicated.
3. Remove the cassette.
• The lm’s VEI indicator will be .✖
• Do not open the lm chamber until the motor stops and
appears and blinks in the data panel.
1. Gently press the manual rewind button.
2. Follow steps 1- 3 from automatic rewind.
When you turn the camera on, autoash or autoash with red-eye reduction is
set (whichever was last used) so the ash will re automatically in low-light
situations.
FLASH RANGE
The range of the built-in ash depends on the lm speed and the focal length
you are using. To ensure proper exposure, make sure your subject is positioned
within the ash range.
Focal Length ISO 100 ISO 200 ISO400
Wide 0.5 - 3.0 m 0.5 - 5.0 m 0.5 - 7.1 m
1.64 - 9.84 ft 1.64 - 16.4ft 1.64 - 23.29 ft
Telephoto 0.5 - 1.9 m 0.5 - 2.7 m 0.5 - 3.8 m
1.64 - 6.23 ft 1.64 - 8.85 ft 1.64 - 12.46 ft.
The following ash modes can be selected.
Autoash
Autoash with red-eye reduction
Manual ll-ash
Flash cancel
Night portrait
Landscape and
The ash will re with every shutter release regardless of lighting. This can be
used to reduce harsh, unattering shadows on your subject’s face or illuminate
your subject when it is back-lit.
Press the ash-mode button until appears
in the data panel, then take the picture.
With ash-cancel, the ash will not re. This mode should be used when
photographing twilight scenes or subjects that are beyond the ash range.
MANUAL FILL-FLASH MODE
Press the ash-mode button until appears
in the data panel, then take the picture.
• When theash is canceled, shutter speeds may be
slow. Placing your camera on a tripod is recommended.
In night portrait mode, the camera balances the ash and existing light exposure
so you can take beautiful pictures of people at sunset or at night. The ash is set
to manual ll ash with red-eye reduction.
Press the ash mode button until appears
in the data panel.
• The shutter speed may be slow. Use of a tripod is
recommended.
FLASH CANCEL MODE
In autoash mode, the ash res automatically in low-light situations.
AUTOFLASH MODE
NIGHT PORTRAIT MODE
USING THE BUILT-IN FLASH
SELECTING THE FLASH MODE
Press the ash-mode button until the desired indicator appears in the data panel.
• The ash mode remains after the picture is taken.
RED-EYE REDUCTION MODE
In this ash mode, the ash res automatically in low-light situations and the red-
eye reduction lamp on the front of the camera blinks before the ash res. Red-
eye reduction reduces the “red-eye” eect which occurs when photographing
people in low light.
Press the ash mode button until appears
in the data panel.
• Warn your subject that the red-eye reduction lamp will
blink before the picture is taken.
LANDSCAPE MODE
Use landscape mode to photograph distant scenes that are beyond the range of
the ash or when photographing through glass. The ash is canceled and focus
is set to innity.
Press the ash mode button until and
appear in the data panel.
• The shutter speed may be slow. Use of a tripod is
recommended.
SELF-TIMER
The self-timer delays release of the shutter for approximately 10 seconds after
the shutter-release button is pressed.
1. Place the camera on a tripod and press
the self-timer button until appears in the
data panel.
2. Center your subject in the focus frame,
then press the shutter-release button.
• The self-timer indicator in the data panel and the self-
timer lamp will blink during the countdown, then glow
just before the shutter releases.
• Self-timer is automatically canceled after the shutter is
released.
• To stop the self-timer, press the self-timer button.
Cancel the self-timer mode by turning the camera o
or pressing the self-timer button until disappears
from the data panel.
DATE/TIME IMPRINTING
Your camera records date and time information on the lm’s magnetic strip that
certied photonishers can imprint in the front and back of your photographs.
• Some labs can not imprint date and/or time information on the front of your photographs.
See your photonisher for a full description of available services.
• This camera has a quartz clock and automatic calendar through the year 2029.
IMPRINTING THE DATE OR TIME
Press the date button until the data panel displays the
format you want to see on the print.
*The sequence is as follows:
—> DATE —> TIME —> -- -- -- (no display)
• When -- -- -- is displayed in the data panel, no data
will be printed on the front of the print, but the date
and time of exposure will be imprinted on the back of
the print.
• If the date/time display is blinking, date/time
information will not be imprinted. The date/time
information needs to be reset.
SETTING THE DATE AND TIME
1. Close the front cover to turn the camera off.
2. Press the date button to display the date.
3. Press the select button until the item you
want to change blinks.
• Each press of the select button causes the next item
to blink.
The sequence is:
year - month - date - hour - minute - stops blinking
4. Press the adjust button to change the
blinking item.
• Press and hold the adjust button to change the value
rapidly.
5. Repeat steps 3 and 4 until all items are
correct.
6. Press the date button to set the updated
information.
CHANGING THE DATE/TIME FORMAT
1. Close the front cover to turn the camera
o.
2. Press the date button to display the date.
3. Press and hold the select button until all
items in the date display blink.
4. Press the adjust button to change the
display format.
• The format sequences as follows:
D M`Y —> `Y M D —> M D`Y
5. Press the date button to set the selected
format.
*With the camera on and before taking the picture:

Product specificaties

Merk: Konica Minolta
Categorie: Niet gecategoriseerd
Model: Vectis 200

Heb je hulp nodig?

Als je hulp nodig hebt met Konica Minolta Vectis 200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Konica Minolta

Konica Minolta

Konica Minolta Hi-Matic 7S II Handleiding

15 Augustus 2023
Konica Minolta

Konica Minolta Dynax 700Si Handleiding

19 Juli 2023
Konica Minolta

Konica Minolta Dynax 9Xi Handleiding

19 Juli 2023
Konica Minolta

Konica Minolta Dynax 404Si Handleiding

19 Juli 2023
Konica Minolta

Konica Minolta Dynax 800Si Handleiding

19 Juli 2023
Konica Minolta

Konica Minolta Dynax 500Si Super Handleiding

19 Juli 2023
Konica Minolta

Konica Minolta SR-T 303 Handleiding

19 Juli 2023
Konica Minolta

Konica Minolta Dynax 500Si Handleiding

18 Juli 2023
Konica Minolta

Konica Minolta Dynax 303Si Handleiding

18 Juli 2023
Konica Minolta

Konica Minolta Dynax 60 Handleiding

18 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

ATen

ATen UC232A5PK Handleiding

17 November 2024
Techly

Techly ICA-DRS 902 Handleiding

17 November 2024
Velbus

Velbus VMB6PBN Handleiding

17 November 2024
Playtive

Playtive IAN 279587 Handleiding

17 November 2024
Playtive

Playtive IAN 115570 Handleiding

17 November 2024
Playtive

Playtive IAN 321351 Handleiding

17 November 2024
Playtive

Playtive IAN 322993 Handleiding

17 November 2024
Atdec

Atdec AWM-AHX-S Handleiding

17 November 2024
Bliss Outdoors

Bliss Outdoors BH-318S Handleiding

17 November 2024
Bliss Outdoors

Bliss Outdoors BSL-314 Handleiding

17 November 2024