Konica Minolta Riva Zoom 90 Handleiding

Konica Minolta Niet gecategoriseerd Riva Zoom 90

Lees hieronder de 📖 handleiding in het Nederlandse voor Konica Minolta Riva Zoom 90 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 161 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Thank you for purchasing this Minolta camera. This camera is equipped

with functions to suit all your photographic needs. Before using your

new camera, please take the time to read through this instruction

manual for it contains information important to the proper use and care

of your camera.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired

operation. Changes or modifications not approved by the party responsible for compliance

could void the user's authority to operate the equipment. This equipment has been tested

and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies the Canadian ICES-003.

Universal Copyright Convention

9222-2449-11 MM-C105 Printed in Malaysia

EINSTRUCTIION MANUAL

Read and understand all warnings and cautions before using this product.

WARNING

Batteries may become hot or explode due to improper use.

• Use only the batteries specified in this instruction manual.

• Do not install the batteries with the polarity (+/–) reversed.

• Do not subject batteries to fire or high temperatures.

• Do not attempt to recharge, short, or disassemble.

• Follow local codes for battery disposal. Tape over lithium battery contacts

before disposal.

Use caution, accidents may occur when using this product near

young children.

Keep batteries or things that could be swallowed away from

young children. Contact a doctor immediately if an object is

swallowed.

Immediately remove the batteries and discontinue use if...

• the camera is dropped or subjected to an impact in which the interior is

exposed.

• the product emits a strange smell, heat, or smoke.

Do not disassemble. Electric shock may occur if a high voltage

circuit inside the camera is touched. Take your camera to a

Minolta Service Facility when repairs are required.

Lens: 38-90mm f/4.8 - 10.8 Construction: 4 elements, 4 groups

Focus: Active AF

Focusing range: Wide: 1m - ∞(3.3 ft. -∞), Telephoto: 1.1m - ∞(3.6 ft.-∞)

Exposure: Programmed Autoexposure, Average metering; Metering

range (ISO 100): wide: EV 6.5-12.5, tele: EV 8.9 - 15;

Film speed setting: Automatic for DX-coded negative film.Non-DX coded film

set to 100.

Film speed range: ISO 100, 200 or 400

Film transport: Auto advance to first frame, auto rewind, manual start of

rewind possible.

Flash: Built-in flash, Recycling time: approx. 8 sec.; Range (ISO

100): Wide: 1.0 - 4.5m (3.3 - 14.8 ft.), Telephoto: 1.1 - 2.0m

(3.6 - 6.6 ft.)

Viewfinder: Albada zoom finder with bright frame; Diopter: -1 diopter

Battery: One 3-volt CR123A or DL123A lithium battery; Battery

performance: Approx. 12 rolls (24 exp. roll w/ 50% flash

use)

Dimensions: 120.5 x 71 x 48.5mm (4.7 x 2.8 x 1.9 in.)

Weight (without batteries): 225g (7.9 oz.), Date model: 235g (8.3 oz.)

Specifications are based on the latest information available at the time of

printing and are subject to change without notice.

FOR PROPER AND SAFE USE

CAUTION

The lens retracts when the camera is turned off or Auto Power Off

is activated. Touching the lens barrel while it is retracting may

cause injury.

TECHNICAL SPECIFICATIONS

PROPER CARE AND USE

• Do not fire the flash if your subject is closer than the minimum flash

distance stated in the manual.

• Do not subject the camera to shock, extreme heat or high humidity.

• Do not let the camera get wet.

• Do not let the camera come in contact with sand, salt, or other grit.

• This camera is designed for use between -10 and 40 °C (14 to

104 F).

• At colder temperatures, the data panel response time may be slow.

At higher temperatures the display may temporarily darken. It will

restore when the temperature normalizes.

• If the lens becomes dirty, clean it with a lens brush. If necessary,

moisten a sheet of lens tissue with one drop of lens-cleaning fluid

and gently wipe the lens. Never touch the lens surface with your

fingers.

• Never use alcohol or chemical solvents on the camera body. If it is

dirty, clean it with a soft, dry cloth.

• When not in use, keep the camera in a cool, dry place away from

dust and chemicals. For extended storage, place the camera in an

airtight container with a drying agent such as silica gel.

• For more information about your camera, contact your local camera

dealer or the Minolta distributor in your area.

Minolta Co., Ltd. 3-13, 2-Chome, Azuchi-Machi, Chuo-Ku, Osaka 541-8556, Japan

Minolta Europe GmbH Minoltaring 11, D-30855 Langenhagen, Germany

Reparatur/Repair Senator-Helmken-Strasse 1, D-28197 Bremen, Germany

Minolta France S.A. 365 Route de Saint-Germain, F-78420 Carrieres-Sur-Seine, France

Minolta (UK) Limited 7 Tanners Drive, Blakelands, Milton Keynes, MK14 5BU, England

Minolta Austria Ges. m.b.H. Amalienstrasse 59-61, A-1131 Wien, Austria

Minolta Camera Benelux B.V. Zonnebaan 39, P.O. Box 6000, NL-3600 HA Maarssen, The Netherlands

Belgian Branch Prins Boudewijnlaan 1, B-2550 Kontich, Belgium

Minolta (Schweiz) AG Riedstrasse 6, CH-8953 Dietikon, Switzerland

Minolta Svenska AB Albygatan 114, S-171 54 Solna, Sweden

Finnish Branch Niittykatu 6 PL 37, SF-02201 Espoo, Finland

Minolta Portugal Limitada Av. do Brasil 33-A, P-1700 Lisboa, Portugal

Minolta Corporation

Head Office 101 Williams Drive, Ramsey, New Jersey 07446, U.S.A.

Los Angeles Branch 11150 Hope Street Cypress, CA 90630, U.S.A.

Minolta Canada Inc.

Head Office 369 Britannia Road East, Mississauga, Ontario L4Z 2H5, Canada

Vancouver Branch 230-3771 Jacombs Road, Richmond, B.C. V6V 2L9, Canada

Minolta Hong Kong Limited Room 208, 2/F, Eastern Center, 1065 King’s Road, Quarry Bay, Hong Kong

Minolta Singapore (Pte) Ltd. 10, Teban Gardens Crescent, Singapore 608923

Shanghai Minolta Optical

Products Co., Ltd. 368 Minolta Road, Songjiang, Shanghai, China

NAMES OF PARTS

FRONT

1. Self-timer/Remote-control**/Red-eye

reduction lamp

2. Meter window*

3. AF windows*

4. Viewfinder window*

5. Flash*

6. Remote-control receiver*/**

7. Back-cover release

8. Lens*

9. Tripod socket

10. Manual-rewind button

11. Main switch

12. Flash-mode button

13. Data panel

14. Self-timer/remote-control** button

15. Shutter-release button

16. Zoom lever

17. Strap eyelet

18. Battery-chamber door

19. Film window

20. Date buttons (DATE model only)

21. Flash lamp (green)

22. Viewfinder*

23. Back cover

BACK

DATA PANEL

1. Flash-mode indicators

2. Self-timer indicator

3. Remote-control indicator**

4. Battery-condition indicator

5. Frame counter

6. Film-transport signals

7. Cartridge mark

1. Image frame

2. Focus frame

3. Flash lamp (green)

Glows: Flash is ready

Blinks: Flash charging

VIEWFINDER

** Remote-control models only.

* Do not touch.

This mark on your camera certifies that this camera meets the requirements of the

EU (European Union) concerning interference causing equipment regulations. CE

stands for Conformité Européenne (European Conformity).

This feature lets you to record the date or time onto the lower-right

portion of the picture. It has an automatic calendar through the year

2049.

• Imprinted data may be difficult to read if the area over which it is superimposed is bright

or non-uniform.

• Do not use the data back when temperatures exceed the operating range of 0° to 40°C

(32° to 104°F).

1. MODE button

2. SELECT button

3. ADJUST button

1 Press the MODE button to choose the data

imprinting format.

• The display will change as shown.

• When -- -- -- is displayed in the data panel, no data will

be printed on the print.

1 Use the SELECT button to move between

different parts of the displayed data. The

selected part will blink indicating that it is

the data to be changed.

2 Press the ADJUST button to change the

data to the correct value. Data continues

changing as long as you hold down the

button.

• In Time mode, pressing the ADJUST button while the

colon is blinking resets the second counter to 00.

3 When all data is correct, press the SELECT

button until the data stops blinking.

• Reset the time and date after changing the battery.

IMPRINTING THE DATE AND TIME

1 2 3

FOR OWNERS OF THE DATE MODEL

Step

Attach the strap as shown.

ATTACHING THE STRAP

SETTING THE TIME AND DATE

Step

Your camera uses one 3-volt CR123A or

DL123A lithium battery to supply power for all

camera operations.

1 Open the battery-chamber door using a

coin or similar object.

2 Insert the battery side first as shown,–

then snap the battery-chamber door closed.

•Before opening the battery-chamber door, make sure

the camera is off.

•Remove batteries + side first.

If the blinking low-battery symbol appears in the

data panel with the other indicators, you can still

use the camera, but the battery will have to be

replaced soon.

If the blinking low-battery symbol appears alone,

you cannot use the camera until you replace the

battery. The shutter cannot be released.

BATTERY WARNING

INSERTING THE BATTERY

• If all indicators blink in the data panel or the camera will not function with a fresh battery,

remove the battery then reinsert it. If normal operation does not resume, or the camera

malfunctions repeatedly, contact an authorized Minolta Service Facility.

AUTO POWER OFF:

To conserve power, the camera will shut down and the lens will retract if it is

not operated for more than 8 minutes. Press the main switch to restore power.

• Do not obstruct the lens while it is retracting.

Step

Use only 35mm, negative film rated ISO 100, 200,

or 400. Non DX-coded film is set to ISO 100.

•Do not use Polaroid instant 35mm film. Winding

problems may occur.

1 Slide the back-cover release down to open

the back cover and place the film cartridge

into the film chamber.

• Always load and unload the film in subdued light.

2 Extend the film tip to the mark,“FILM TIP”

making sure it lays flat.

•If the film tip extends past the mark, gently push the

excess film back into the film cartridge.

3 Close the back cover.

•If the film has been loaded improperly, cartridge mark

appears and will blink in the data panel and the

shutter will remain locked. Open the back cover and

repeat the loading procedure.

LOADING THE FILM

•The film automatically advances to the first

frame and appears in the data panel.

TAKING PICTURES

1 Press the Main switch to turn the camera

on.

2 Align your subject within the focus frame

and press the W side of the zoom lever to

move toward wide angle or the T side to

move toward telephoto.

• Your subject must be at least 1m (3.3 ft.) away from the

lens in Wide and 1.1m (3.6 ft.) away in Telephoto.

• Do not hold the lens barrel; focus may not be accurate.

3 Press the shutter-release button partway

down.

•For vertically framed pictures, hold the camera so the

flash is on top.

When your subject is located outside the focus

frame, you can first lock focus on your subject, then

recompose the picture as desired.

1 Align the subject within the focus frame and

press the shutter-release button partway

down.

2 Without lifting your finger, recompose the

picture then press the shutter-release button

all the way down to take the picture.

•Lift your finger from the shutter-release button to cancel

focus hold.

FOCUS HOLD

4 When the green flash lamp glows, gently

press the shutter-release button all the

way down to take the picture.

• The flash will automatically fire in low light.

• The film is automatically advanced to the next frame.

• After the number of frames specified on the film

cartridge have been taken (ex. 24 or 36), additional

exposures may overlap.

Step

The film will rewind automatically after the last

frame has been exposed.

When appears and blinks in the data

panel, open the back cover and remove the

film.

To begin rewind before the end of the roll,

turn the camera on and gently press the

manual-rewind button.

MANUAL REWIND

If rewind stops before the film has been completely rewound, all

indicators blink. DO NOT OPEN THE BACK COVER. Insert a fresh

battery then press the manual-rewind button.

REWINDING THE FILM

Power is sufficient for all the camera operations.

• Eath time the camera is turned on, a symbol will appear

briefly in the data panel.

Product specificaties

Merk:	Konica Minolta
Categorie:	Niet gecategoriseerd
Model:	Riva Zoom 90

Heb je hulp nodig?

Als je hulp nodig hebt met Konica Minolta Riva Zoom 90 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Konica Minolta

Konica Minolta Hi-Matic 7S II Handleiding

15 Augustus 2023

Konica Minolta Dynax 700Si Handleiding

19 Juli 2023

Konica Minolta Dynax 9Xi Handleiding

19 Juli 2023

Konica Minolta Dynax 404Si Handleiding

19 Juli 2023

Konica Minolta Dynax 800Si Handleiding

19 Juli 2023

Konica Minolta Dynax 500Si Super Handleiding

19 Juli 2023

Konica Minolta SR-T 303 Handleiding

19 Juli 2023

Konica Minolta Dynax 500Si Handleiding

18 Juli 2023

Konica Minolta Dynax 303Si Handleiding

18 Juli 2023

Konica Minolta Dynax 60 Handleiding

18 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024

Kramer K-Bar Camera Bracket Handleiding

26 November 2024

Kramer RK-19 Handleiding

26 November 2024

Kramer OSP-MM1 Handleiding

26 November 2024

Kramer ASPEN-1616UX Handleiding

26 November 2024

Korg Pitchstrap Handleiding

26 November 2024

NeoMounts WL70-450BL11 Handleiding

26 November 2024

Kramer CLS-AOCH/60 Handleiding

26 November 2024

Klauke EKM 6022ISM Handleiding

26 November 2024