Konica Minolta 5600 Handleiding
Konica Minolta
Faxmachine
5600
Lees hieronder de đź“– handleiding in het Nederlandse voor Konica Minolta 5600 (194 pagina's) in de categorie Faxmachine. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/194
MINOLTAFAX 5600
P-1
Safety Precautions for Inspection and Service
When performing inspection and service procedures, observe the following precautions to
prevent accidents and ensure utmost safety.
✽Depending on the model, some of the precautions given in the following do not apply.
Different markings are used to denote specific meanings as detailed below.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury. It may also be used to
alert against unsafe practices.
The following graphic symbols are used to give instructions that need to be observed.
Used to call the service technician’s attention to what is graphically represented
inside the marking (including a warning).
Used to prohibit the service technician’s from doing what is graphically repre-
sented inside the marking.
Used to instruct the service technician’s to do what is graphically represented
inside the marking.
1. Always observe precautions.
2. Before starting the procedures, be sure to unplug the power cord.
3. Use the specified parts.
WARNING
CAUTION
WARNING
•Parts requiring special attention in this product will include a label containing the
mark shown on the left plus precautionary notes. Be sure to observe the pre-
cautions.
•Be sure to observe the “Safety Information” given in the Operator’s Manual.
•This product contains a high-voltage unit and a circuit with a large current
capacity that may cause an electric shock or burn.
•The product also contains parts that can jerk suddenly and cause injury.
•If this product uses a laser, laser beam leakage may cause eye damage or
blindness.
•For replacement parts, always use the genuine parts specified in the manufac-
turer’s parts manual. Installing a wrong or unauthorized part could cause
dielectric breakdown, overload, or undermine safety devices resulting in possi-
ble electric shock or fire.
•Replace a blown electrical fuse or thermal fuse with its corresponding genuine
part specified in the manufacturer’s parts manual. Installing a fuse of a different
make or rating could lead to a possible fire. If a thermal fuse blows frequently,
the temperature control system may have a problem and action must be taken
to eliminate the cause of the problem.
P-2
4. Handle the power cord with care and never use a multiple outlet.
5. Be careful with the high-voltage parts.
6. Do not work with wet hands.
7. Do not touch a high-temperature part.
8. Maintain a grounded connection at all times. (This item may not apply in the USA.)
9. Do not remodel the product.
10. Restore all parts and harnesses to their original positions.
•Do not break, crush or otherwise damage the power cord. Placing a heavy
object on the power cord, or pulling or bending it may damage it, resulting in a
possible fire or electric shock.
•Do not use a multiple outlet to which any other appliance or machine is con-
nected.
•Be sure the power outlet meets or exceeds the specified capacity.
•A part marked with the symbol shown on the left carries a high voltage. Touch-
ing it could result in an electric shock or burn. Be sure to unplug the power cord
before servicing this part or the parts near it.
•Do not unplug or plug in the power cord, or perform any kind of service or
inspection with wet hands. Doing so could result in an electric shock.
•A part marked with the symbol shown on the left and other parts such as the
exposure lamp and fusing roller can be very hot while the machine is energized.
Touching them may result in a burn.
•Wait until these parts have cooled down before replacing them or any surround-
ing parts.
•Be sure to connect the ground wire to the ground terminal even when perform-
ing an inspection or repair. Without proper grounding, electrical leakage could
result in an electric shock or fire.
•Never connect the ground wire to a gas pipe, water pipe, telephone ground wire,
or a lightning conductor.
•Modifying this product in a manner not authorized by the manufacturer may
result in a fire or electric shock. If this product uses a laser, laser beam leakage
may cause eye damage or blindness.
•To promote safety and prevent product damage, make sure the harnesses are
returned to their original positions and properly secured in their clamps and sad-
dles in order to avoid hot parts, high-voltage parts, sharp edges, or being
crushed.
•To promote safety, make sure that all tubing and other insulating materials are
returned to their original positions. Make sure that floating components mounted
on the circuit boards are at their correct distance and position off the boards.
Product specificaties
| Merk: | Konica Minolta |
| Categorie: | Faxmachine |
| Model: | 5600 |
Heb je hulp nodig?
Als je hulp nodig hebt met Konica Minolta 5600 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Faxmachine Konica Minolta
26 April 2023
Handleiding Faxmachine
- Faxmachine Philips
- Faxmachine Samsung
- Faxmachine Panasonic
- Faxmachine Canon
- Faxmachine Xerox
- Faxmachine Acer
- Faxmachine Belgacom
- Faxmachine Brother
- Faxmachine KPN
- Faxmachine Ricoh
- Faxmachine Sagem
- Faxmachine Sagemcom
- Faxmachine Sharp
- Faxmachine Welltech
- Faxmachine Oki
- Faxmachine Olivetti
Nieuwste handleidingen voor Faxmachine
22 November 2024
16 November 2024
22 Augustus 2024
22 Augustus 2024
9 April 2024
9 April 2024
3 April 2024
9 Januari 2024
9 Januari 2024
9 Januari 2024