Klipsch RC-7 Handleiding

Klipsch Speaker RC-7

Lees hieronder de 📖 handleiding in het Nederlandse voor Klipsch RC-7 (14 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/14
REFERENCE
RF-7, RF-5, RC-7, RS-7
SERIES
OWNER’S MANUAL
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer.
12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.
14. vicing is required when the apparatus hasREFER all servicing to qualified service personnel. Ser
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
This symbol indicates that there are important operating and maintenance instructions in the literature
accompanying this unit.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present
within this unit.
WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus
to rain or moisture.
WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all
servicing to qualified service personnel.
CAUTION: Changes or modifications not expressly approved by the manufacturer could void the users
authority to operate this device.
POSITIONING YOUR REFERENCE SERIES SPEAKERS
Before You Start — Some Klipsch speakers have feet and other accessories that may need to be
installed prior to use. Please refer to Diagrams 1, 2, and 3 for installation.
FOR MAXIMUM STABILITY AND SAFETY THE INCLUDED OUTRIGGER FEET MUST BE INSTALLED.
Left and Right Main Channel Speakers — For optimum performance, place your speakers six to 15 feet
(2 to 4.5m) apart and at least 24 inches (60.8cm) from the back and side walls. They may also be
toed-in slightly for better stereo imaging. The listening position should be about 1 to 1.5 times the dis-
tance separating the speakers.Refer to Figures 1 and 2 for connection and placement.
Center Channel Speakers — Center channel speakers are designed to place dialogue and primary
sounds so that they appear to come from the video screen. The speakers should therefore be placed as
close to the screen as possible, preferably directly on top of or below the screen. Refer to Figures 2 and
3 for placement.
Rear Surround Channel Speakers — Klipsch WDST™ surround speakers should be placed on the walls
directly adjacent to or on the wall behind the listening position. They are designed to recreate the sense
of space and ambience that many of today’s surround sound technologies provide. Refer to Diagram 4
and Figures 2 for placement.
CONNECTING YOUR REFERENCE SERIES SPEAKERS TO YOUR AMPLIFIER
Conventional Connection — Using 16-gauge or larger speaker wire, connect the RED "positive" (+) ter-
minal of the LEFT speaker to the RED "positive" (+) terminal of your amplifier’s LEFT channel. Connect
the BLACK "negative" (–) terminal of the LEFT speaker to the BLACK "negative" (–) terminal of your
amplifier’s LEFT channel. Repeat this procedure for connecting all remaining speakers to the appropri-
ate amplifier channels. Refer to Figure 4 and 6. Make sure that no bare wires from any of the connec-
tions touch any other terminals as this could cause a short and damage your equipment. Some
Reference models have two sets of input terminals connected by wire jumpers. For conventional con-
nection, leave these jumpers in place, and use either set of terminals.
Bi-wire Connections — Some Reference models have the capability to be bi-wired. These speakers
have two sets of input terminals connected by wire jumpers. Bi-wiring requires using two separate
speaker wires for each speaker. The RED "positive" (+) leads of both LEFT channel wires are tied
together and inserted into the same RED "positive" (+) terminals of the amplifier’s LEFT channel. On the
LEFT speaker, the wire jumpers are removed. One of the two speaker wires is connected to the top set
of terminals (RED to RED and BLACK to BLACK) while the other speaker wire is connected to the lower
set of terminals in the same manner. Refer to Figure 5. Klipsch recommends this method of hook-up for
improved bass response, imaging and detail. For more information on how to bi-wire your speakers, see
your dealer or visit www.klipsch.com.
Amplifier Requirements — Klipsch speakers are highly efficient and will operate easily on a wide variety
of amplifiers. All Klipsch speakers are 8-ohm compatible and can be driven to very high levels with low
distortion. Due to the high output levels Klipsch speakers are capable of reproducing, exercise caution
with the volume control. Excessive volume over long periods can permanently damage your hearing.
Overdriving your amplifier could also damage your speakers. Check with your dealer to make sure your
particular amplifier is best suited to your application. We want you listening for a lifetime.
CARE AND CLEANING OF YOUR REFERENCE SERIES SPEAKERS
Your speakers ha yl or real wood veneer finish thave a durable vin t should only require dry dusting or
cleaning with a damp cloth. Avoid the use of abrasive or solvent-based cleaners and harsh detergents.
The brush attachment of your vacuum or a slightly damp sponge should remove any dust from your
speaker grilles.
WARRANTY—U.S. AND CANADA ONLY
The Warranty below is valid only for sales to consumers in the United States or Canada.
KLIPSCH, L.L.C. ("KLIPSCH") warrants this product to be free from defects in materials and work-
manship (subject to the terms set forth below) for a period of five (5) years from the date of pur-
chase. During the Warranty period, KLIPSCH will repair or replace (at KLIPSCH’s option) this prod-
uct or any defective parts (excluding electronics and amplifiers). For products that have electronics
or amplifiers, the Warranty on those parts is for a
period of two (2) years from the date of purchase.
To obtain Warranty service, please contact the KLIPSCH authorized dealer from which you pur-
chased this product.If your dealer is not equipped to perform the repair of your KLIPSCH product,
it can be returned, freight paid, to
KLIPSCH for repair. Please call KLIPSCH at 1-800-KLIPSCH for instructions. You will need to ship
this product in either its original packaging or packaging affording an equal degree of protection.
Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this
product is within the Warranty period, must be presented or included to obtain Warranty service.
This Warranty is invalid if (a) the factory-applied serial number has been altered or removed from
this product or (b) this product was not purchased from a KLIPSCH authorized dealer. You may call
1-800-KLIPSCH to confirm that you have an unaltered serial number and/or you purchased from a
KLIPSCH authorized dealer.
E N G -
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This Warranty is only valid for the original purchaser and will automatically terminate prior to expi-
ration if this product is sold or otherwise transferred to another party.
This Warranty does not cover cosmetic damage or damage due to misuse, abuse, negligence, acts
of God, accident, commercial use or modification of, or to any part of, the product. This Warranty
does not cover damage due to improper operation, maintenance or installation, or attempted repair
by anyone other than KLIPSCH or a KLIPSCH dealer which is authorized to do KLIPSCH warranty
work. Any unauthorized repairs will void this Warranty. This Warranty does not cover product sold
AS IS or WITH ALL FAULTS.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REME-
DY OF THE CONSUMER. KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF
ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED
TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.
Some states do not allow the exclusion or limitation of incidental or consequential damages or
implied warranties so the above exclusions may not apply to you. This Warranty gives you specific
legal rights, and you may have other rights, which vary from state to state.
WARRANTY OUTSIDE THE UNITED STATES AND CANADA
The warranty on this product if it is sold to a consumer outside of the United States or Canada shall
comply with applicable law and shall be the sole responsibility of the distributor that supplied this prod-
uct. To obtain any applicable warranty service, please contact the dealer from which you purchased this
product, or the distributor that supplied this product.

Product specificaties

Merk: Klipsch
Categorie: Speaker
Model: RC-7

Heb je hulp nodig?

Als je hulp nodig hebt met Klipsch RC-7 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker Klipsch

Klipsch

Klipsch Reference R-50PM Handleiding

8 December 2024
Klipsch

Klipsch One Plus Handleiding

8 December 2024
Klipsch

Klipsch R-50PM Handleiding

8 December 2024
Klipsch

Klipsch R-14PM Handleiding

8 December 2024
Klipsch

Klipsch Promedia Heritage 2.1 Handleiding

8 December 2024
Klipsch

Klipsch CS-16C Handleiding

8 December 2024
Klipsch

Klipsch DS-180CSM Handleiding

15 November 2024
Klipsch

Klipsch Heritage The One Handleiding

15 November 2024
Klipsch

Klipsch RIC-65 Handleiding

15 November 2024
Klipsch

Klipsch Synergy Black Label F-200 Handleiding

13 November 2024

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Kanto

Kanto REN Handleiding

11 December 2024
Phonic

Phonic JUBI 12A LITE Handleiding

11 December 2024
Phonic

Phonic aSK215 Handleiding

11 December 2024
Phonic

Phonic iSK 8 Deluxe Handleiding

11 December 2024
Phonic

Phonic SAFARI 1000 LITE Handleiding

11 December 2024
Phonic

Phonic SAFARI 2000P Handleiding

11 December 2024
Phonic

Phonic iSK 15 Handleiding

11 December 2024
Phonic

Phonic JUBI 12 Handleiding

11 December 2024
Pro-Ject

Pro-Ject Speaker Box 3E Carbon Handleiding

11 December 2024
MB

MB PESSPROVS32A Handleiding

11 December 2024