Klipsch KS-7502-THX Handleiding

Klipsch Speaker KS-7502-THX

Lees hieronder de 📖 handleiding in het Nederlandse voor Klipsch KS-7502-THX (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
THX Ultra2
In-Ceiling
Owner's Manual
The exclamation point, within an equilateral triangle, is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the product.
The lightning flash with arrowhead symbol within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electrical shock to
persons.
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLE AN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. DO NOT install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers ) that produce heat.
9. DO NOT defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wider blade or the
third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or
pinched, particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the
manufacturer.
12. USE only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used,
use caution when moving the cart /apparatus
combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms
or when unused for long periods of time.
14. REFER all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the power-supply cord or
plug is damaged, liquid has been spilled, objects have
fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been
dropped.
15. DO NOT expose this apparatus to dripping or splashing and
ensure that no objects filled with liquids, such as vases,
are placed on the apparatus.
16. To completely disconnect this apparatus from the AC
mains, disconnect the power supply cord plug from the AC
receptacle.
17. The mains plug of the power supply cord shall remain
readily operable.
Important Safety Information
2
Designed to function in any standard, Klipsch TH X Ultra2 in-ceiling
speakers are engineered for years of performance. Minimum
construction requirements call for drywall or other mounting surfaces
to be at least 1/2" thick.
In-Ceiling Speaker Placement
(See Figures 1 and 2)
Your new Klipsch THX Ultra2 architectural speakers have been de-
signed to deliver great sound while remaining unobtrusive wherever
you install them.
The is designed for Left, Center or Right channel KL-7502-THX
use or wherever a monopole speaker is called for, such as surround
back channels in Select configurations. The result is a flush-mount
speaker that creates a powerful statement in any application.
The features a patent-pending horn array, consisting KS-7502-THX
of two Tractrix® Horn-loaded tweeters. It is designed specifically
for surround use in home theater applications. The result is a
flush-mount speaker that creates enveloping ambient sound fields
and localizing specific surround effects through the use of Klipsch’s
proprietary Wide Dispersion Surround Technology (WDST™). The
careful alignment of the two controlled-directivity Tractrix Horn tweet-
ers, angled opposite one another, yields an incredibly wide dispersion
pattern from a flush-mount design.
THX Ultra2 Architectural Speakers
WARNING:
To reduce the risk of fire or electrical shock, do not expose
this apparatus to rain or moisture.
WARNING: No naked flame sources – such as candles – should be
placed on the product.
WARNING: This product is intended to be operated ONLY from the
AC Voltages listed on the back panel or included power supply of the
product. Operation from voltages other than those indicated may cause
irreversible damage to the product and void the product's warranty. The
use of AC Plug Adapters is cautioned because it can allow the product
to be plugged into voltages in which the product was not designed to
operate. If the product is equipped with a detachable power cord, use
only the type provided with your product or by your local distributor
and/or retailer. If you are unsure of the correct operational voltage,
please contact your local distributor and/or retailer.
CAUTION: Place the equipment near a main power supply outlet and
make sure that you can easily access the power breaker switch.
W A R N I N G
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this
equipment are hazardous to life. No user-serviceable parts inside.
Refer all servicing to qualified service personnel.
#2 Phillips Screwdriver
Wire strippers
Stud finder
Saw
Minimum Tools Required for Installation
1. Cut the appropriate size opening in the ceiling using the template
provided. If the template is not available, cutout dimensions are
provided on the Klipsch website, at www.klipsch.com. Sizes
listed are minimum. If accuracy of cut cannot be achieved,
you may add 1/4” to the dimension. Be careful not to cut
through any existing wiring or plumbing. Avoid compromising
any fire stops between studs.
2. Run speaker wiring (18 gauge minimum) to the openings. Be
sure to comply with all building codes in your area.
3. Attach the wire to the speaker using the wire’s color coding or
markings as a guide to maintain proper polarity.
Speaker Installation
(for New Construction, skip to step #3)
3
4. Insert the speaker assembly into the opening and attach by
tightening the Phillips screws (see illustration). The frame’s
“dogs” will swivel out and “sandwich” the ceiling and frame
together as they are tightened. If you use a power tool to
tighten these screws, please use a low torque setting. Failure
to do so could result in damage to your speaker (see Figure 3)
Figure 1
Figure 2
Figure 3
To maximize performance, install the equally spaced to K L-7502-TH X
either side of the video display. When being used as a center channel,
please locate the speaker as close to the video display as is practical.
The KS-7502-THX should be installed to either side of the listening
position at an equal distance from the listener whenever possible. You
may also install them behind the listening position and achieve good results.
THX Ultra2 7.1 surround systems utilize a surround back channel in
addition to the traditional side surrounds. When configuring such a
system it is suggested to use speakers in the surround back K L-750 2
location.
5. At this point, you may paint the speaker grille before attaching it
to the speaker. Klipsch speakers and grilles are designed to
accept most types of paint. Use the supplied clear paint shield to
protect the speaker baffle and drivers when painting the bezel of
the speaker. Care should be taken to avoid excessive paint
build-up in the grille perforations. Please remove the scrim
material attached to inner surface of the grille by carefully
peeling it out prior to painting. Reinstall scrim after the paint on
the grille is dry.
6. Press the grille into place.

Product specificaties

Merk: Klipsch
Categorie: Speaker
Model: KS-7502-THX

Heb je hulp nodig?

Als je hulp nodig hebt met Klipsch KS-7502-THX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker Klipsch

Klipsch

Klipsch Reference R-50PM Handleiding

8 December 2024
Klipsch

Klipsch One Plus Handleiding

8 December 2024
Klipsch

Klipsch R-50PM Handleiding

8 December 2024
Klipsch

Klipsch R-14PM Handleiding

8 December 2024
Klipsch

Klipsch Promedia Heritage 2.1 Handleiding

8 December 2024
Klipsch

Klipsch CS-16C Handleiding

8 December 2024
Klipsch

Klipsch DS-180CSM Handleiding

15 November 2024
Klipsch

Klipsch Heritage The One Handleiding

15 November 2024
Klipsch

Klipsch RIC-65 Handleiding

15 November 2024
Klipsch

Klipsch Synergy Black Label F-200 Handleiding

13 November 2024

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Kanto

Kanto REN Handleiding

11 December 2024
Phonic

Phonic JUBI 12A LITE Handleiding

11 December 2024
Phonic

Phonic aSK215 Handleiding

11 December 2024
Phonic

Phonic iSK 8 Deluxe Handleiding

11 December 2024
Phonic

Phonic SAFARI 1000 LITE Handleiding

11 December 2024
Phonic

Phonic SAFARI 2000P Handleiding

11 December 2024
Phonic

Phonic iSK 15 Handleiding

11 December 2024
Phonic

Phonic JUBI 12 Handleiding

11 December 2024
Pro-Ject

Pro-Ject Speaker Box 3E Carbon Handleiding

11 December 2024
MB

MB PESSPROVS32A Handleiding

11 December 2024