Klipsch iFi Handleiding

Klipsch Speaker iFi

Lees hieronder de 📖 handleiding in het Nederlandse voor Klipsch iFi (6 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 68 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance with

the manufacturer's instructions.

8. DO NOT install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

9. DO NOT defeat the safety purpose of the polarized or grounding

type plug. A polarized plug has two blades with one wider than the

other. A grounding type plug has two blades and a third grounding

prong. The wider blade or the third prong are provided for your

safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. PROTECT the power cord from being walked on or pinched,

particularly at plugs, convenience receptacles, and the point

where the pparay exit from the a tus.

11. ONLY USE attachments/accessories specified by the

manufacturer.

12. bracket, or table specified USE only with a cart, stand, tripod,

by the manufacturer, tus. When a cart is or sold with the appara

used, cart/apparause caution when moving the tus

combina void injurtion to a y from tip-over.

13. UNPLUG this a tus during lightning storms or when unused ppara

for long periods of time.

14. REFER all servicing to qualified service personnel. Servicing is

required when the appara ged in any watus has been dama y,

such as power-suppl ged, y cord or plug is dama liquid has been

spilled or objects have fallen into the a tus, tus ppara the appara

has been exposed to rain or moisture, te does not opera

normally, or has been dropped.

This symbol indicates that there are important

operating and maintenance instructions in the

literature accompanying this unit.

This symbol indicates that dangerous voltage

constituting a risk of electric shock is present

within this unit.

To reduce the risk of fire or electrical shock, do not expose this

product to rain or moisture. The product must not be exposed to

dripping and splashing and no object filled with liquids - such as a

vase of flowers - should be placed on the product.

No naked flame sources - such as candles - should be placed on the

product.

WARNING: The AC main plug should be located such that it remains

readily operable by the user.

WARNING: Voltages in this equipment are hazardous to life. No

user-serviceable parts inside. Refer all servicing to qualified

service personnel.

CAUTION: Changes or modifications not expressly approved by the

manufacturer could void the user’s authority to operate this device.

CAUTION: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

ABOUT YOUR KLIPSCH MANUAL

Thank you for your purchase of the Klipsch iFi

™Speaker System.

After reading this manual and connecting your system, you will

hear the result of over 55 years of stringent engineering and class-

leading research and development. Like all Klipsch products, your

system features Klipsch horn-loaded technology – the guiding

design for the first Klipschorn

®developed in 1946 and for every

product that has followed. Horn loading allows your speakers to

deliver high-sensitivity, low distortion, flat frequency response and

wide dispersion, which translate to unequaled power, detail and

dynamics, the hallmarks of the “Klipsch Sound.” Please be sure

to fill out the enclosed warranty card or register online at

www.klipsch.com so we are better able to serve you. Again, thank

you for allowing Klipsch to bring life to your music and movies for

many years.

PACKAGE CONTENTS

Two RSX-3 satellite speakers

One 8-inch long-throw

subwoofer with slotted port

One iFi control dock

Five dock adapters

Two pairs 6-foot speaker cables

One radio-frequency (RF)

handheld remote control

One AC po wer cord

iFi SPEAKER SYSTEM

SYSTEM SETUP

Control Dock

The iFi system comes with five adapters that allow different model

iPods to work with the control dock. Each adapter is labeled to

identify the “size” iPod it is meant to fit. Depending on the age of

your iPod, the model that you have may not correspond to the size

as listed on the bottom of the adapters. The guide below will help

in choosing the appropriate insert for your particular model of iPod.

Choose the adapter that matches your iPod and insert it into the

top of the dock until it is snugly in place with the slot centered over

the multipin docking connector.

Your iPod should now fit easily but securely into the top of the dock

with the multipin connector at the base of the slot sliding into the

socket along the iPod’s bottom edge. The iFi dock will flex slightly

to relieve stress on the connector when you insert your iPod.

To avoid damage, do not apply excessive force when inserting

the iPod.

All iPod functions are available when it is in the iFi dock.

Basic System Connections

The control dock and the two satellite speakers connect to the

amplifier on the rear of the subwoofer which powers the

entire system.

• Turn the Power switch on the subwoofer’s back panel Off and

unplug the AC power cord.

• The control dock has an attached cable. Connect the end of

that cable to the matching jack on the subwoofer.

• Use the supplied twin-conductor speaker cables to connect

the satellite speakers to the binding-post output terminals on

the subwoofer’s back panel. Follow these directions carefully

to ensure correct operation. Loosen the nuts on the speaker

binding posts until the holes through the metal posts are

fully exposed. For each conductor, insert the bare wire at the

end through one of the binding post holes and screw the nut

on the post down finger-tight against the wire. Make

sure that no strands of bare wire touch between adjacent

black and red binding posts as this may cause amplifier

malfunction or damage. Also be sure that the conductor

attached to the black (negative) terminal on each satellite is

attached to the matching black spring clip on the subwoofer

panel and that the red (positive) terminal on each satellite is

connected to the matching red spring clip on the subwoofer

panel. Reversing these connections (black to red and red to

black) will reduce bass output and impair overall sound quality.

The dashed line on the speaker cable will help in making

a correct connection.

• Attach the female end of the power cord to the matching

socket on the subwoofer and the male end to an AC

wall outlet.

• The speakers can be used with or without their grilles

attached. The grilles are held in place by magnetic catches.

To remove a grille, pull it forward; to replace, line its edges

up with the speaker’s front panel and let it snap into position.

WARNING: Do not attempt to remove the subwoofer

grille as it is permanently attached.

40GB

40GB Touch Wheel, 40GB Click Wheel

40GB Photo, 60GB Photo

20GB

20GB Touch Wheel

MINI

First and Second Generation iPod Mini

10GB/15GB

10GB Touch Wheel, 15GB Touch Wheel

20GB Click Wheel, 30GB Photo

30GB

30GB Touch Wheel

iFi SPEAKER SYSTEM

Auxiliary Audio Input

The control dock also has a 3.5mm stereo minijack auxiliary audio

input on its back panel. It allows you to listen to an external source

(a portable CD player, for example) through the system. When a

plug is inserted in this jack, the system automatically switches to

the auxiliary input. To switch back to the iPod, disconnect the

auxiliary input.

A similar input on the subwoofer’s back panel can also be used

with an external source, but it is primarily intended to connect to

the audio output of a computer. This input is mixed with the

signal from the dock, whether from the iPod or from the

auxiliary input so that both sources are heard simultaneously.

This allows for, as an example, the sound from your computer to

be heard while music is playing from an iPod in the dock.

Subwoofer and Speaker Placement

Although you can place the components of the iFi system almost

any way that is convenient, speaker location will affect sound

quality. The subwoofer will generally perform best when placed on

the floor in a corner. A good second option is to place it 6 to 12

inches from a wall. The farther it is moved toward the middle of

the room, the lower the bass output will be.

You will get the best stereo effect with the satellite speakers

placed equidistant from the listening position. Wide separation will

tend to make the sound more spacious. If possible, avoid locating

either satellite closer than two feet from a side wall. Place them at

seated ear height. If that is not practical, adjust the stands’ ball

joints to aim the satellites up or down toward the listening position.

Stand Adjustment and Wall Mounting

The speakers attach to their stands via a ball joint that allows them

to be swiveled over a wide range.To adjust the angle, un-snap the

supplied hex wrench from underneath the base, loosen the four

screws in the clamp plate that surrounds the ball joint.Position the

speakers as desired and tighten the four clamp screws. Do not

over tighten! Each stand also incorporates an adjustable down stop

to prevent the speaker from drooping after its angle is adjusted.

You can access the head of this down stop from the bottom side

of the stand.

Also on the underside of the base are three (3) keyholes that

enable the stand to function as a wall mount. To install, follow the

instructions below:

1. Using a #2 Philips screwdriver, remove the four (4) screws

that attach the oval metal plate to the bottom the

speaker base.

2. Using the metal plate as a template, mark the screw

locations for the three (3) keyhole slots in the desired

location on the wall. The single keyhole slot must be located

at the top.

3. Screw #8 pan head wood screws (at least two inches/

51mm long) into a wood stud or dry wall anchors with a 20

pound (9 kg) or g ting. ve the screw heads reater load ra Lea

protruding from the wall surface a y 1/4" (~7mm).pproximatel

4. Make sure the small rubber feet are facing the wall and

place the oval metal plate onto the screws through the key

hole slots. Slide the metal plate down into position and

adjust the tightness of the screws for a snug fit.

5. f Remove the metal plate from the wall by sliding it up and of

the screws.

6. Remove the logo from the speaker base by compressing its

split post on the underside and rotate it 180° for

proper orientation.

7. Replace the oval metal plate onto the base of the speaker

using the four (4) screws removed in Step #1. Do

not over-tighten!

8. Remove the included hex wrench from the underside of the

speaker base. Loosen the four hex head screws on the

speaker’s ball joint assembly and rotate the base up and

behind the speaker.

9. y tighten the four ball joint screws to secure the Gentl

speaker’s position. You may need to fine-tune the speaker’s

angle after mounting it to the wall.

10. Hook the speaker base keyholes on the screw heads

protruding from the wall. Slide the base downward onto the

screws to lock the speaker in place.

11. If the speaker will be mounted over the location where the

speaker wire emerges from the wall, thread the wire through

the hole in the speaker base by removing the cosmetic plug.

12. Connect the speaker wire to the speakers binding posts.

13. Fine tune the speaker’s angle and tighten the ball socket

hex screws with the wrench. Do not over-tighten!

14. Store the hex wrench in the bottom of the base cover by

snapping it into the speaker base.

Product specificaties

Merk:	Klipsch
Categorie:	Speaker
Model:	iFi
Kleur van het product:	Zilver
Stroomvoorziening:	230V @ 50Hz
Audio-uitgang:	114dB SPL @ 1m
Aansluitingen:	iPod docking connector\nStereo mini auxiliary input\nStereo mini line input
Audio-uitgangskanalen:	2.1 kanalen
Frequentiebereik:	27 - 20000 Hz
Op afstand bedienbaar:	Ja
Tweeter:	Ja