Klein Tools ET270 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Klein Tools ET270 (36 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36
INSTRUCTION MANUAL
ENGLISH
• AUTO-RANGING
WITH DATA HOLD
• AUDIBLE
CONTINUITY
• BATTERY TEST
• PERFORMS
STANDARD AND
GFCI WIRING
FAULT TESTS
• INDICATES
A CIRCUIT'S
BREAKER IN
FIND MODE
FRANÇAIS p. 25
ESPAÑOL pg. 13
Multi-Tester DMM with
Receptacle Tester
ET270
2m
CAT III
600V
600V
40M
Ω
5001748
2
GENERAL SPECIFICATIONS
Klein Tools' ET270 is an auto-ranging digital multi-tester that measures
AC/DC voltage, resistance, continuity, and performs a battery test. It also
tests wiring conditions in standard 120V and GFCI electrical receptacles
and inspects North American GFCI devices.
• Environment:
Indoor. DO NOT expose to moisture, rain, or snow.
• Operating Altitude: 6562 ft. (2000m)
• Relative Humidity: <80% non-condensing
• Operating Temp: ° ° ° °32 F to 104 F (0 C to 40 C)
• Storage Temp: ° ° ° °14 F to 140 F (-10 C to 60 C)
• Accuracy: Values stated at 65°F to 83°F (18°C to 28°C)
• Temp Coef cient: °0.1 x (Quoted Accuracy) per C above
28 C or below 18 C, corrections are required when ambient ° °
working temp is outside of Accuracy Temp range
• Dimensions: 6.41" × 3.13" × 1.84" (162.7 × 79.4 × 46.6 mm)
• Weight: 8.9 oz. (250 g)
• Calibration: Accurate for one year
• Standards: Conforms to: UL STD 61010-1, 61010-2-033, 1436.
Certified to: CSA STD C22.2 # 61010-1,
61010-2-033, 160.
IEC EN 61010-1, 61010-2-033, 61326-1.
• Pollution degree: 2
• Accuracy: ± (% of reading + # of least significant digits)
• Drop Protection: 6.6 ft. (2 m)
• Safety Rating: CAT III 600V, Class 2, Double insulation
CAT III: Measurement category III is applicable to test and
measuring circuits connected to the distribution part of the
building’s low-voltage MAINS installation.
• Electromagnetic Environment: IEC EN 61326-1. This
equipment meets requirements for use in basic and controlled
electromagnetic environments like residential properties,
business premises, and light-industrial locations.
Specifications subject to change.
ENGLISH
3
ELECTRICAL SPECIFICATIONS
VOLTAGE (AUTO-RANGING)
Function Range Resolution Accuracy
AC Voltage
(V AC)
400.0V 100mV ±(1.2% + 5 digits)
600V 1V ±(1.2% + 3 digits)
DC Voltage
(V DC)
4000mV 1mV ±(1.0% + 5 digits)
40.00V 10mV
±(1.0% + 3 digits)400.0V 100mV
600V 1V
Input Impedance: 10MΩ
Frequency Range: 50 to 60Hz
Maximum Input: 600V AC RMS or 600V DC
RESISTANCE (AUTO-RANGING)
Range Resolution Accuracy
400.0Ω 0.1Ω
±(1.0% + 5 digits)
4.000kΩ 1Ω
40.00kΩ 10Ω
400.0kΩ 100Ω
4.000MΩ 1kΩ ±(1.2% + 5 digits)
40.00MΩ 10kΩ ±(3.0% + 5 digits)
Maximum Input: 600V DC or 600V AC RMS
BATTERY TEST
Voltage Resolution Accuracy
9V 10mV ±(1.0% + 5 digits)
1.5V 1mV
Test Current: 9V (11~22.5mA), 1.5V (8~18mA)
OUTLET* TEST
Voltage Resolution Accuracy
30V AC - 150 V AC 1V ±(2.0% + 2 digits)
*NOTE: For North American, 120V, 50-60Hz, 3-wire receptacles only.
• Audible signal <10ΩContinuity Check:
• 3 samples per secondSampling Frequency:
• "OL" indicated on display, overload protection Overload:
600V RMS in all settings
• "-" on display indicates negative polarityPolarity:
• 3-3/4 digit, 4000 Count LCDDisplay:


Product specificaties

Merk: Klein Tools
Categorie: Meetapparatuur
Model: ET270

Heb je hulp nodig?

Als je hulp nodig hebt met Klein Tools ET270 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Meetapparatuur Klein Tools

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur