KJB Security Products DVR261WA Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor KJB Security Products DVR261WA (1 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
1 3 2
3. Assemble & disassemble DVR cover
Disassemble the DVR cover
1. Hold the DVR from the bottom by left hand.
Carefully twist the cover of DVR by right
hand following red arrow pointed direction.
2. Remove the cover by
following red arrow pointed
direction.
1. Align the guiding points on the cover
to the red arrow mark on the DVR before assembly.
Assemble the DVR cover
2. Twist the cover by following
red arrow pointed direction
until it is properly locked.
Warning! Follow instructions below to avoid lens damage.
Right hand
Left hand
2
4. Charge battery
5. Format memory card
Connect to PC via USB cable
1. Remove the cover from the DVR and connect the supplied USB cable
into the device.
2. Plug the USB cable to PC, the green Charge LED of the device will
illuminate to show the charging is in process.
3. Green LED will turn off when the battery is fully charged.
Charge LED(Green)
When battery is fully charged,
the green LED will turn off.
Power LED(Blue)
Rec LED(Red)
LED bar
3.
1. Long press the Format Button and hold.
2. Use another finger to press the Power On
button for 2 seconds.
3. Power LED will illuminate Blue, hold the Format
button until the Rec LED starts to blink.
4. Release the Format button. Rec LED will go
out after 5 seconds to show the formatting is
completed.
1
2
1
1. Names and parts
2. Package Content
USB cable
4GB
Lock
Adapter
Memory Card
WARNING: DO NOT FILL THE CUP WITH HOT WATER.
TO-GO Cup x 3
1.CMOS Lens
2.USB Port
3.Format Button
4.Continuous Rec(Left)/
Motion Detection Rec
(Right)
5.Reset Button
6.ON/REC Button
Wi-Fi Button
7.Memory Card Slot
8.Vibration On/Off
Switch
2
1
3
4
5
6
7
8
5 4
V1.0
PV-CC10W
1080p Coffee Cup Lid Wi-Fi DVR
Quick Guide
LawMate, innovation never stops
®
1
8.3 Vibration On/Off
Switch to On/Off to activate/deactivate vibration mode.
2
8.2 WiFi Operation
With device powered on, short press to turn on Wi-Fi function.
To turn off the WiFi function, just short press
For more information about WiFi connection setup, please refer to
PV Cam Viewer quick guide.
1
1
6. Retrieve files from DVR
1. Use memory card reader to download video/photo files.
2. With the device powered on and memory card inserted, connect the
device to PC by USB cable. It will be recognized by PC as an external
drive for user to retrieve the files.
There are two ways to download video/photo files.
7.
Date a time tnd set ing
8. Operation
Please note, memory card needs to be formatted on the device
for the unit to recognize it. Formating memory card by a PC is
not recommended and may result in recording failure.
Please refer to the Synchronize the Time steps on
the PV Cam Viewer for IP Cam quick guide.
8.1 Instant Recording
When the unit is assembled,press the area on the cover for 3
seconds. DVR will power on and start to record automatically after
vibrating once. To turn off the device, press the area on the cover
for 3 seconds and the DVR will be turned off after vibrating twice.
1
1
2 3


Product specificaties

Merk: KJB Security Products
Categorie: Bewakingscamera
Model: DVR261WA

Heb je hulp nodig?

Als je hulp nodig hebt met KJB Security Products DVR261WA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera KJB Security Products

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera