Kguard AR421-CKT001 Handleiding

Kguard Voicerecorder AR421-CKT001

Lees hieronder de 📖 handleiding in het Nederlandse voor Kguard AR421-CKT001 (81 pagina's) in de categorie Voicerecorder. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/81

DVR with Cloud Technology

USER MANUAL

Aurora Series

Default user name: admin

Default password: 123456

ENGLISH

Preface

DVR User’s Manual

About this Manual

The material in this document is for informaon purpose and is subject to change without prior noce. We

made every eort to ensure that this user’s manual is accurate and complete. However, no liability is assumed

for any errors and omissions that may have occurred.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful

interference in a residenal installaon. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instrucons, may cause harmful interference

to radio communicaons. However, there is no guarantee that interference will not occur in a parcular

installaon. If this equipment does cause harmful interference to radio or television recepon, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separaon between the product and receiver.

• Connect the product into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Declaraon of Conformity

This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired

operaon.

Limitaon of Liability

• This publicaon is provided “AS IS” without warranty of any kind, either expressed or implied, including

but not limited to, the implied warranes of merchantability, tness for any parcular purpose, or non-

infringement of a third party’s rights.

• This publicaon may include technical inaccuracies or typographical errors. Changes may be made to the

informaon herein, at any me, for publicaon improvements and/or of the corresponding device(s).

Disclaimer of Warranty

In no event shall the supplier be liable to any party or any person, except for replacement or reasonable

maintenance of the product, for the cases, including but not limited to the following:

• Any damage or loss, including but without limitaon, direct or indirect, special, consequenal or exemplary,

arising out of or relang to the device;

• Personal injury or any damage caused by inapppropriate use or negligent operaon of the user;

• Unauthorized disassemble, repear or modicaon of the device by the user;

• Any problem, consequenal inconvenience, or loss or damage, arising out of combining the system with the

devices of a third party;

• Any claim or acon for damages, brought by any person or organizaon being a photogenic subject, due to

violaon of privacy with the result of pictures from a surveillance camera, including saved data, for some

reason, becomes public or is used for the purpose other than for surveillance.

ENGLISH

Preface

DVR User’s Manual

Safety Informaon

Warning

This is the symbol for indicang any potenal hazard,

risk or condion requiring special aenon.

The user needs to refer to the important operang

and maintenance or servicing instrucons.

Cauon

The lighng ash with an arrow head symbol, in an

equilateral triangle, is intended to alert the user.

There is dangerous “voltage” presence near by the

product’s enclosure which may be risk of person.

Safety Precauons

• Do not touch live electrical parts.

Electric shock can be avoided. Follow the

recommended pracces listed below. Faulty

installaon, improper grounding, and incorrect

operaon and maintenance of electrical equipment

are always sources of danger.

• Do not try to install equipment outdoor, during strong

wind and rain.

• Do not install or remove equipment outdoor, when

raining.

• Do not try to install or operate any equipment, during

a thunderstorm.

• Always ground all electrical equipment and the work

plaorm.

Prevent accidental electrical shocks. Connect power

source, control cabinets, and work plaorm to an

approved electrical ground.

• Always use the correct cable size.

Sustained overloading will cause cable failure and

result in possible electrical shock or re hazard. Work

cable should be the same rang as the factory.

• Always keep cables and connectors in good condion.

Improper or worn electrical connecons can cause

short circuits and can increase the chance of an

electrical shock. Do not use worn, damaged, or bare

cables.

• Always avoid open-circuit voltage.

The added voltages increase the severity of electric

shock hazard.

• Always wear insulated gloves while you adjust

equipment.

Electric power should be turned o and insulated

gloves should be worn when making any equipment

adjustment to assure shock protecon.

• Always wear protecve clothing such as long

sleeve shirts while you are installing or removing

equipment.

• Always wear high, snug ng shoes.

• Always wear clean clothes without grease or oil.

• Protect neighboring workers from exposure to arc

radiaon.

• Always wear long trousers or jeans while you are

installing or removing equipment.

• Always wear safety helmet or hard head and safety

shoes before work.

• Always keep the equipment in dry places.

• Always wear safety harnesses/belt while you work in

high places.

• Always wear dry clothing and avoid moisture and

water.

• Always wear Public Safety Vest, while you work at

night.

• Make sure all electrical connecons are ght, clean,

and dry.

• Make sure that you are well insulated to eliminate

electric stac charge.

• Always wear dry gloves, rubber-soled shoes, or stand

on a dry board or plaorm.

• Always follow recognized safety standards.

• Always wear correct eye, ear, and body protecon.

• Always have second person on-site, while you work in

dark, poor venlaon, or high places.

• Make sure that you are well protected against arc

ashes, mechanical injury, or other mishaps.

• Make sure that the polarity of wire is correct before

installing equipment.

• Always handle equipment with care.

• Do not block the venlaon of equipment.

• Do not put the magnec parts around the equipment.

• Do not put the objects on top of the equipment.

Product specificaties

Merk:	Kguard
Categorie:	Voicerecorder
Model:	AR421-CKT001
Kleur van het product:	Zwart
Stroomvoorziening:	12V/2A
Videocompressieformaten:	H.264
Aantal USB 2.0-poorten:	2
Aantal HDMI-poorten:	1
Aantal Ethernet LAN (RJ-45)-poorten:	1
Formaat analoog signaal:	NTSC, PAL
Audio-ingangen:	4
Audio-uitgang:	1
Temperatuur bij opslag:	-20 - 70 °C
Afspeel modi:	Fast forward, Slow
Aantal kanalen:	4 kanalen
Afmetingen (B x D x H):	315 x 230 x 40 mm
BNC output ports:	1
Video capturing speed:	120 fps
Bewegingssensor:	Ja
Maximum aantal HDD's per behuizing:	1
BNC input ports:	4
VGA (D-Sub) uitgang ports:	1
Afstandsbediening inbegrepen:	Ja
Bedrijfstemperatuur (T-T):	-10 - 55 °C
RS-485 ports:	1
Maximum HDD capaciteit:	2000 GB
Playback resolutie ondersteund:	1024x768, 1280x1024, 1366x768, 1440x900