Kenwood SW-40HT-BK Handleiding

Kenwood Subwoofer SW-40HT-BK

Lees hieronder de 📖 handleiding in het Nederlandse voor Kenwood SW-40HT-BK (32 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

POWERED SUBWOOFER

INSTRUCTION MANUAL

SW -40HT

SUBWOOFER AVEC AMPLIFICATEUR INCORPORE

MODE D’EMPLOI

B61-1290-00 00 (K, E, Y, X) KW 0602

SUBWOOFER AMPLIFICADOR

MANUAL DE INSTRUCCIONES

ENGLISH FRANÇAIS DEUTSCH

NEDERLANDS

ITALIANO

SUBWOOFER MIT EINGEBAUTEN VERSTÄRKER

BEDIENUNGSANLEITUNG

SUBWOOFER CON AMPLIFICATORE INCORPORATO

ISTRUZIONI PER L’USO

LA DICHIARAZIONE DI CONFORMITA'

"CE" DI QUESTO

PRODOTTO E' DEPOSITATA PRESSO:

KENWOOD ELECTRONICS EUROPE B.V.

AMSTERDAMSEWEG 37

1422 AC UITHOORN

THE NETHERLANDS

ESPAÑOL

SUBWOOFER MET INGEBOUWDE VERSTERKER

GEBRUIKSAANWIJZING

ENGLISH

Before applying power

Caution: Read this page carefully to ensure safe operation.

Units are designed for operation as follows.

U.S.A. and Canada ............................................ AC 120V only

Europe and U.K. ................................................ AC 230V only

CAUTION

The power in this equipment will not be completely cut off

from the AC wall outlet when the main switch is turned

OFF.

Information on Disposal of Old Electrical and Electronic

Equipment (applicable for EU countries that have

adopted separate waste collection systems)

Products with the symbol (crossed-out wheeled

bin) cannot be disposed as household waste. Old

electrical and electronic equipment should be re-

cycled at a facility capable of handling these items

and their waste byproducts. Contact your local

authority for details in locating a recycle facility

nearest to you. Proper recycling and waste dis-

posal will help conserve resources whilst prevent-

ing detrimental effects on our health and the en-

vironment.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER

TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS

IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS IN-

TENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN

THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK

OF ELECTRIC SHOCK TO PERSONS.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER-SER-

VICEABLE PARTS INSIDE. REFER SERVICING TO QUALI-

FIED SERVICE PERSONNEL.

Safety precautions

WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Australia ............................................................ AC 240V only

Other countries ............. AC 110-120 / 220-240 V switchable*

AC voltage selection

The AC voltage selector switches on the rear panel are set

to the voltage that prevails in the area to which the unit is

shipped. Before connecting the power cord to your AC

outlet, make sure that the setting positions of these switches

match your line voltage. If not, they must be set to your

voltage in accordance with the following direction.

Note: Our warranty does not cover damage caused by

excessive line voltage due to improper setting of the AC

voltage selector switch.

AC voltage selector switches

Move switch lever to match your line voltage with a

small screwdriver or other pointed tool.

ENGLISH

IMPORTANT SAFEGUARDS

Read Instructions – All the safety and operating instructions

should be read before the product is operated.

Retain Instructions – The safety and operating instructions

should be retained for future reference.

Heed Warnings – All warnings on the product and in the

operating instructions should be adhered to.

Follow Instructions – All operating and use instructions

should be followed.

1. Cleaning – Unplug this product from the wall outlet be-

fore cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

2. Attachments – Do not use attachments not recom-

mended by the product manufacturer as they may cause

hazards.

3. Water and Moisture – This product shall not be exposed

to dripping and splashing - for example, near a bath tub, wash

bowl, kitchen sink, or laundry tub; in a wet basement; or near

a swimming pool; and the like. Do not place an object con-

taining liquid, such as a flower vase, on the appliance.

4. Accessories – Do not place this product on an unstable

cart, stand, tripod, bracket, or table. The product may fall,

causing serious injury to a child or adult, and serious damage

to the product. Use only with a cart, stand, tripod, bracket, or

table recommended by the manufacturer. Any mounting of

the product should follow the manufacturer’s instructions,

and should use a mounting accessory recom-

mended by the manufacturer.

A product and cart combination should be moved

with care. Quick stops, excessive force, and un-

even surfaces may cause the product and cart

combination to overturn.

5. Ventilation – Slots and openings in the cabinet are pro-

vided for ventilation and to ensure reliable operation of the

product and to protect it from overheating, and these open-

ings must not be blocked or covered. The openings should

never be blocked by placing the product on a bed, sofa, rug,

or other similar surface. This product should not be placed in

a built-in installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer’s instructions have

been adhered to.

6. Power Sources – This product should be operated only

from the type of power source indicated on the product. If

you are not sure of the type of power supply to your home,

consult your product dealer or local power company.

7. CAUTION - Polarization – This product may be

equipped with a polarized alternating-current line plug (a plug

having one blade wider than the other). This plug will fit into

the power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try reversing

the plug. If the plug should still fail to fit, contact your electri-

cian to replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

8. Power Cord Protection – Power-supply cords should be

routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular at-

tention to cords at plugs, convenience receptacles, and the

point where they exit from the product.

9. Lightning – For added protection for this product during

a lightning storm, or when it is left unattended and unused

for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the product due to lightning and power-line surges.

10. Overloading – Do not overload wall outlets, extension

cords, or integral convenience receptacles as this can result

in a risk of fire or electric shock.

11. Object and Liquid Entry – Never push objects of any

kind into this product through openings as they may touch

dangerous voltage points or short-out parts that could result

in a fire or electric shock. Never spill liquid of any kind on the

product.

12.Servicing – Do not attempt to service this product your-

self as opening or removing covers may expose you to dan-

gerous voltage or other hazards. Refer all servicing to quali-

fied service personnel.

13.Damage Requiring Service – Unplug this product from

the wall outlet and refer servicing to qualified service person-

nel under the following conditions:

a) When the power-supply cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into

the product,

c) If the product has been exposed to rain or water,

d) If the product does not operate normally by following

the operating instructions.

e) If the product has been dropped or damaged in any

way, and

f) When the product exhibits a distinct change in per-

formance – this indicates a need for service.

g) If an abnormal smell or smoke is detected.

14.Replacement Parts – When replacement parts are re-

quired, be sure the service technician has used replacement

parts specified by the manufacturer or have the same char-

acteristics as the original part. Unauthorized substitutions may

result in fire, electric shock, or other hazards.

15.Safety Check – Upon completion of any service or re-

pairs to this product, ask the service technician to perform

safety checks to determine that the product is in proper oper-

ating condition.

16.Wall or Ceiling Mounting – This product should be

mounted to a wall or ceiling only as recommended by the

manufacturer.

17. Heat – This product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products that produce heat. Do not place a flaming object,

such as a candle or lantern, or near the product.

18.Power Lines – An outside antenna system should not be

located in the vicinity of overhead power lines or other elec-

tric light or power circuits, or where it can fall into such power

lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such

power lines or circuits as contact with them might be fatal.

19.Outdoor Antenna Grounding – If an outside antenna or

cable system is connected to the product, be sure the an-

tenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70,

provides information with regard to proper grounding of the

mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding conductors,

location of antenna-discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA

GROUNDING AS PER NATIONAL

ELECTRICAL CODE

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

ANTENNA

LEAD IN WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUND CLAMP

ELECTRIC

SERVICE

EQUIPMENT

GROUND

CLAMPS

Notes:

1. Item 7 is not required except for grounded or polarized

equipment.

2. Item 19 complies with UL in the U.S.A.

Caution: Read this page carefully to ensure safe operation.

Product specificaties

Merk:	Kenwood
Categorie:	Subwoofer
Model:	SW-40HT-BK
Kleur van het product:	Zwart
LED-indicatoren:	Stroom
Aan/uitschakelaar:	Ja
Impedantie:	6 Ohm
Gemiddeld vermogen subwoofer:	75 W
Bass reflex:	Ja
Subwoofertype:	Actieve subwoofer
Frequentiebereik subwoofer:	35 - 200 Hz
Breedte van de subwoofer:	215 mm
Hoogte van de subwoofer:	350 mm
Diepte van de subwoofer:	342 mm
Gewicht subwoofer:	9700 g
Tweeter:	Nee
Stroomverbruik (typisch):	70 W
Diameter driver subwoofer:	160 mm
Subwoofer maximale vermogen:	100 W
Line inputs (RCA):	1
Crossover subwoofer frequenties:	0 - 100 Hz