Kenwood Excelon P-HD1F Handleiding

Kenwood Niet gecategoriseerd Excelon P-HD1F

Lees hieronder de 📖 handleiding in het Nederlandse voor Kenwood Excelon P-HD1F (18 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new power amplier.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the
model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product.
Model XM160-2 Serial number
© 2023 JVCKENWOOD Corporation
XM160-2
2-CHANNEL POWER AMPLIFIER DESIGNED AND ENGINEERED TO BE
PLUG AND PLAY FOR 2014-UP HARLEY-DAVIDSON® ROAD GLIDE®,
STREET GLIDE®, OR ULTRA MOTORCYCLES
INSTRUCTION MANUAL
JVCKENWOOD Corporation
US Residents Only
Register Online
Register your KENWOOD product at https://registerkenwood.us.jvckenwood.com/
Safety precautions
WARNING
To pr ev ent injur y or fire, ta ke the fo llo wing
precautions:
Mounting and wiring this product requires skills and
experience. For safetys sake, leave the mounting and
wiring work to professionals.
To prevent a short circuit, keep coins, tools, and other
metal objects away from the unit.
If the unit starts to emit smoke or strange smells,
turn off the power immediately and consult your
KENWOOD dealer.
Do not touch the unit during use because the surface
of the unit becomes hot and may cause burns if
touched.
CAUTION
To prevent da mage to the ma chine, tak e the
following precautions:
Be sure the unit is connected to a 12 V DC power
supply with a negative ground connection.
Do not open the top or bottom covers of the unit.
NOTE
If you experience problems during installation, consult
your KENWOOD dealer.
If the unit does not seem to be working right, consult
your KENWOOD dealer.
Protection function
To help protect your bike’s electrical system and battery,
the amp has a built in feature where it will turn itself o if
it sees less than 10.5 volts, whether the bike is running or
not. If you’re listening to your stereo while not riding, this
feature can help protect your battery so the bike can still
start. If you’re riding and the amp shuts o, this could be
showing a potential issue with your charging system. If
this feature is activated and the amp shuts o, it will turn
the amp back on again if the voltage exceeds the 10.5
volt threshold.
To prevent battery rise
When the unit is used in the ACC ON position without
turning the engine ON, it depletes the battery. Use it after
starting the engine.
Speaker selection
Using speakers with smaller input ratings than the
amplifier s output power would result in smoke
generation or equipment failure.
Use speakers that have an impedance of 2 Ω or greater.
When more than one set of speakers are going to
be used, calculate the combined impedance of the
speakers and then connect suitable speakers to the
amplier.
Contents
Section 1: Installation in Street/Ultra Glide Models....3
Section 2: Installation in Road Glide Models................6
Section 3: Adding a Second XM160-2 to the Bike.......8
Section 4: Final System Adjustments............................10
Warranty Info......................................................................11
The XM160-2 amplier is a Class D design. It should be
understood that ALL Class D ampliers, regardless of brand, cause
a reduction in FM reception. The XM160-2 features a proprietary
circuit design that KENWOOD believes gives the BEST FM reception
available for any Class D Amplier designed for a motorcycle. If
you add a 2nd or 3rd model amplier to your system, reduction
of FM reception is increased and is considered normal.
KENWOOD understands that some riders prefer the cosmetics of
in fairing antennas, however it should be noted that NOTHING
works as well as the factory antenna. If FM is an important part
of your riding experience, we strongly advise against the use of
any in fairing type antenna. Do not use the rod antenna as an antenna
to be mounted inside the fairing.
2
Section 1 - Single Amplier Installation in Street
Glide / Ultra
Installation procedure
1. Remove the seat and both wires (+ and -) from the battery. Remove the outer fairing/
headlamp assembly and set it aside. Refer to a service manual if you need help with this.
NOTE: Placing a towel on the front fender can help prevent scratches ordings from
dropped tools or fasteners, etc.
2. Over the top of the radio, pull up to release each wire harness from the black plate
via the factory Christmas tree” fasteners. If your bike has factory GPS, the small square
antenna will need to be relocated just behind the voltmeter as shown in Fig 1.1 below.
Figure 1.1 - The white circle shows the new location for GPS Antenna if your bike came
factory equipped with this feature.
3. Remove the four factory T-20 Torx screws that go through the top of the black plate
and into the top of the radio.
3


Product specificaties

Merk: Kenwood
Categorie: Niet gecategoriseerd
Model: Excelon P-HD1F

Heb je hulp nodig?

Als je hulp nodig hebt met Kenwood Excelon P-HD1F stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Kenwood

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd