Kenwood Excelon CA-PLT98RG Handleiding

Kenwood Niet gecategoriseerd Excelon CA-PLT98RG

Lees hieronder de 📖 handleiding in het Nederlandse voor Kenwood Excelon CA-PLT98RG (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new product.
© 2023 JVCKENWOOD Corporation
CA-PLT98RG
XM160-2-98 AMPLIFIER MOUNTING PLATE DESIGNED AND
ENGINEERED FOR 1998-2013 HARLEY-DAVIDSON® FLTR ROAD GLIDE®
MOTORCYCLES
INSTRUCTION MANUAL
JVCKENWOOD Corporation
Important Notes
©2023 JVCKENWOOD Corporation. All Rights Reserved. KENWOOD® and eXcelon®
are registered trademarks of JVCKENWOOD Corporation. Harley-Davidson®, Electra
Glide®, Road Glide®, Street Glide®, Ultra Classic®, Tri Glide®, CVO™, Screamin Eagle®
and Tour-Pak® are trademarks or registered trademarks of Harley-Davidson, Inc. and/
or its affiliates and if used or implied are for reference only. There is no affiliation
between Harley-Davidson, Inc. and/or its aliates and JVCKENWOOD Corporation
and/or its aliates. All other trademarks are the property of their respective owners.
Specications subject to change without notice.
XM160-2-98 Amplier Mounting Plate Installation
Instructions
Installation procedure
1. Apply one-half of the supplied Velcro to the mounting plate you are installing and the
other half to the back of the amplier.
2. Place the amplier onto the mounting plate.
3. With the outer fairing o, remove the wire harness from the wire strap” (located on the
brake side of the inner fairing).
NOTE: In this area, a larger factory “Molex plug (if present) is secured to the frame.
4. Pull down on this Molex plug to unclip it from the frame and let it hang for now (newer
model bikes have this Molex located elsewhere).
NOTE: The A arrow in Fig 1.1 shows one of the nuts that need to be removed so that
the adaptor plate can attach onto the 2 main studs. The other nut his hidden behind the
wiring in Fig 1.1
5. Once the plate is on, re-install these nuts to factory torque specications.
6. Secure the wires so they cannot rub against the amplier when the bike is moving.
7. The Molex plug that was removed from the frame can now be re-secured to the other
wire harness using zip ties (if Molex plug is present).
NOTE: Reference the XM160-2-98 manual for amplier wiring instructions.
Fig 1.1
For updated information (the latest Instruction Manual, etc.),
please visit the following website:
https://manual.kenwood.com/en_contents/search/


Product specificaties

Merk: Kenwood
Categorie: Niet gecategoriseerd
Model: Excelon CA-PLT98RG

Heb je hulp nodig?

Als je hulp nodig hebt met Kenwood Excelon CA-PLT98RG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Kenwood

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd