Kenwood DRV-W440 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Kenwood DRV-W440 (2 pagina's) in de categorie Camcorder. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
DRV-W440
INSTRUCTION MANUAL
Dashboard Camera
© 2019 JVCKENWOOD Corporation
5 6 1 5 N 6 4 1 0 0 0 1 R 0 0
Shutting down the Device
Occasionally, you may need to perform a hardware reset when the
device stops responding or if it appears to be “frozen” or unresponsive. To
shut down the device, press and hold the Power button until the system
powers off.
If the system does not shut down by keeping
the Power button pressed, you can force it to
shut down by inserting a small rod (such as
a straightened paperclip) into the Shutdown
button on the device.
Function Keys
The device provides 4 function keys to control the corresponding icons
displayed on the LCD screen. The keys' functions may vary on different
screens.
Takes a photo.
Manually starts an event
recording.
Enters Parking mode.
Opens the Menu screen.
(Recording screen)
Moves to the next option.
Acts as the ENTER button.
Moves to the previous option.
Acts as the BACK button.
(Menu screen)
System Icons
Various system icons on the status bar at the top of the screen provide
the status information of your device. The displayed icons will vary
depending on your device model and state.
(Recording screen)
1 Recording indicator
2 Wireless LAN status
3 Time display
4 Microphone status
1 2 3 4
Setting the Date and Time
To make sure that the date and time of your recordings are correct,
check the settings before you begin recording.
1. Press to access the Settings Menu.
2. Select System > Date/Time.
3. Use / to adjust the value of the selected field; press
and repeat the step until all fields have been changed.
4. When done, press .
Recording in Driving Mode
Continuous Recording
By default, the system will automatically begin continuous recording
shortly after start-up. The System indicator flashes in green and amber
alternately while the recording is in progress.
The recording may be divided into several video clips; recording will
not stop between video clips. When your memory card fills up with
continuous recordings, it will automatically record over the oldest
existing files in this category.
When continuous recording is in progress, you can manually stop
recording by pressing . Press to return to the recording
screen; the system will start continuous recording automatically.
The continuous recordings can be found in the “Video” category for file
playback.
Event Recording
By default, if an event happens such as a sudden impact, high speed
driving, an aggressive turn or an accidental crash during continuous
recording, the G sensor will prompt the device to start recording the
event.
Note: You can change the sensitivity level of the G sensor by selecting
> > .Video Recording G-Sensor Sensitivity
Getting Connected
KENWOOD DRV Link
The KENWOOD DRV Link app is an integrated application that allows
you to view, share and back up the videos recorded on a dashboard
camera via wireless LAN. Search for "KENWOOD DRV Link" in Apple App
Store or in Google Play Store to download the app for free.
Note:
The KENWOOD DRV Link app is compatible with iOS 9.0 (and above)
and Android 5.0 (and above) devices. JVCKENWOOD does not
guarantee the product’s compatibility with smartphones from all
manufacturers.
App Store is a service mark of Apple Inc., registered in the U.S. and
other countries.
IOS is a trademark or registered trademark of Cisco in the U.S. and
other countries and is used under license.
Android and Google Play are trademarks of Google LLC.
Setting up a Wireless Connection
On your device, select > Wireless LAN > On to enable the wireless
LAN mode. Once enabled, the wireless LAN setting screen displays the
SSID and password of the device.
On your smartphone, follow the steps to set up the wireless connection.
1. Enable the wireless LAN function on the smartphone.
2. Open the KENWOOD DRV Link app and follow the on-screen
instructions to set up the connection.
Open the wireless LAN setting of the smartphone to display the
detected devices. From the list, select the device you want to
connect to and then enter the password.
The next time you use your smartphone to connect to the device,
you will not be prompted to enter the password again unless you
reset your phone to the factory default settings.
Note: The instructions about operating the smartphone are for reference
only. The actual setting options and methods may vary depending on
your phone type/model and the app version.
Camera Mode
The device allows you to take a photo. Do one of the following:
If the recording is in progress, press to take a photo.
Press > > .Camera
The photos can be found in the “Photo” category for file playback.
Playback Mode
To select a video or photo for playback:
1. Press > .File Playback
2. Select the desired type.
3. Select the desired file from the list and then press to start
playback.
4. During playback, you can:
While playing videos
Press / to play the previous/next video; press and
hold the buttons to fast rewind/forward the video.
Press to return to the list.
Press to display the pop-up menu to select:
/ : Starts or pauses the playback.Play Pause
Move to Event: Moves the file to the “Event” category.
Transfer to phone: Uploads the selected video to your
smartphone.
: Deletes the file.Delete
While viewing photos
Press / to display the previous/next photo.
Press to return to the list.
Press to display the pop-up menu to select:
Transfer to phone: Uploads the selected photo to your
smartphone.
: Deletes the file.Delete
If you want to manually start an event recording while continuous
recording is in progress, press the Event button ( ).
The event recording will save moments before and moments after the
event. When your memory card fills up with event recordings, it will
record over the oldest existing files in this category.
The event recordings can be found in the “Event” category for file
playback.
Parking Mode
Your device supports the parking recording function. You must use an
additional hard wire kit (sold separately) to record the video during the
Parking mode.
The Parking mode function is disabled by default. Before enabling the
Parking mode, please check the memory storage allocation of your
device. Select > > System Storage Allocation to set a proper
allocation for parking recording. Changing the allocation will erase the
memory card, so save any videos or photos to your computer first.
You can enable the function by selecting > Parking Mode >
Detection > On. (The icon will appear on the screen.) When the
Parking mode detection is enabled, the system will enter the Parking
mode when the car stops moving for about 5 minutes.
In the Parking mode, parking recordings could be triggered only when
movements or vibrations are detected. The parking recording will save
moments before and moments after the event. When your memory card
fills up with parking recordings, it will record over the oldest existing files
in this category.
Note:
You cad press to manually enter the Parking mode while
continuous recording is in progress.
The parking recording is triggered by the G sensor and motion
detection of the device. You can change the configuration by
selecting > > and Parking mode Motion Detection G-Sensor
Sensitivity.
To exit the Parking mode and resume continuous recording, press .
If movements are detected and recorded during the Parking mode, you
will be asked to playback the video when you exit the Parking mode.
The parking recordings can be found in the “Parking” category for file
playback.
Getting to Know Your Device
6
1
2
3
7
4
5
8 9
10
1 Mini-USB connector
2 Device mount socket
3 LCD screen
4 System indicator
5 Microphone
6 Memory card slot
7 Shutdown button
8 Camera lens
9 Speaker
10
Power button ( ) /
Function keys
Using Your Device in a Vehicle
1. Make sure that your car is parked on level ground. Use a
commercially available cleaning cloth to wipe off any dirt or grease
from the location you are mounting the device.
Follow the instructions below to securely mount your device in a
vehicle.
2
1
2
3
4
2. Adjust the lens angle. When adjusting the angle of mounting, make
sure that the camera’s view is parallel with the level ground and the
ground/sky ratio is close to 6/4.
3. Connect the cables. Route the cables through the top ceiling and
the A-pillar so that it does not interfere with driving. Make sure that
the cable installation does not interfere with the vehicle's airbags or
other safety features.
Using a Memory Card
You must insert a memory card before you can start recording. You
should use separate MicroSD cards for recording and for regular data
storage.
Hold the card (MicroSD) by the edges and gently
insert it into the slot as shown in the illustration.
To remove a card, gently push the top edge of
the card inwards to release it and pull it out of the
slot.
Formatting a Card
To format a memory card (all data will be erased), press > .Format
Note:
DO NOT apply pressure to the centre of the memory card.
The manufacturer does not guarantee the product’s compatibility
with memory cards from all manufacturers.
Before you start recording, please format the memory card to avoid
malfunction caused by files not created by the device.
Turn the device off before removing the memory card.
Turning the Device On
Complete the installation according to the instructions in the “Using
your device in a vehicle” section. Once the vehicle engine is started,
the device automatically turns on. The System indicator glows in green
when the device is powered.
Power Button
Press and hold the Power button for 2 seconds to manually turn the
device on and off.
specifically for use on portable devices with LCD panels may be used
to help protect the screen from minor scratches.
Never clean your device with it powered on. Use a soft, lint-free cloth
to wipe the screen and the exterior of your device.
Do not use paper towels to clean the screen.
Never attempt to disassemble, repair or make any modifications to
your device. Disassembly, modification or any attempt at repair could
cause damage to your device and even bodily injury or property
damage and will void any warranty.
Do not store or carry flammable liquids, gases or explosive materials
in the same compartment as your device, its parts or accessories.
To discourage theft, do not leave the device and accessories in plain
view in an unattended vehicle.
Overheating may damage the device.
Cleaning the Device
When the device is dirty, wipe it with a dry silicone cloth or other
soft cloth. If the device is very dirty, remove the dirt with a cloth
with neutral cleaner on it and then wipe off the cleaner. Wiping the
device with a hard cloth or using using a volatile substance such as
thinner or alcohol may cause scratches, deformation, deterioration,
or other damage.
When the lens is dirty, gently wipe it with a soft cloth dampened
with water. Rubbing the lens strongly with a dry cloth may cause
scratches.
Precautions for Installation
Install the device in a position where it will not block the front view
of the driver (position where hidden by the rear-view mirror).
Install the device so that it is within the wiping range of the wiper.
Install the device in a position where it will not interfere with the
movement of the rear-view mirror.
Take care not to install the device over the vehicle inspection sticker
or other sticker.
Take care not to install the device where it will interfere with driving
or airbag operation.
When installing the device in a vehicle equipped with a driving
support system, check the instruction manual of the vehicle and
then select an installation location that will not interfere with the
driving support system.
If the device is installed incorrectly, event recording or parking
recording may not work correctly. Refer to "How to Install" for the
loosening of fixing knob, installation orientation, installation angle,
and other information and then install the device correctly.
Do not install the device near a digital terrestrial television antenna
or an electrical component. Doing so may reduce television receiver
sensitivity or cause flickering and noise.
Use a commercially available cleaning cloth or the like to wipe
off all dirt and grease on the mounting surface and then fix the
mount base in place. If the device is re-affixed or mounted using, for
example, general-purpose double-sided tape, the adhesion strength
may weaken and cause the device to fall.
After mounting the device, leave it for 24 hours before use to enable
the mounting strength of the mount bracket to improve. Failing to
do so may result in the adhesion of the mount bracket becoming
weak and the device falling.
Fix the cord in place with tape or the like so that it does not interfere
with driving.
Precautions for Use
Do not block the camera lens, get dirt on it, or place a reflective
object near it.
When LED traffic lights are recorded, video in which they appear to
be flickering or flashing may be recorded. JVCKENWOOD assumes no
responsibility with regard to the distinguishing or recording of traffic
lights.
If coating is used on the windshield of the vehicle, recording quality
may be affected.
There is no guarantee that the device can record video in all
conditions.
Others
About software
This device includes the software owned by following third parties.
Following condition of the license is applicable to each software.
Konatu Font
Copyright (c) 2012 MASUDA mitiya
Applicable license :M IT License
libupnp
Copyright (c) 2000-2003 Intel Corporation
Applicable license :B SD 3-Clause "New" or "Revised" License
Applicable condition of license for third party software
MIT License
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including without
limitation the rights to use, copy, modify, merge, publish, distribute,
sublicense, and/or sell copies of the Software, and to permit persons
to whom the Software is furnished to do so, subject to the following
conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
OR OTHER DEALINGS IN THE SOFTWARE.
BSD 3-Clause "New" or "Revised" License
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* \begin{itemize}
* \item Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* \item Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* \item Neither name of Intel Corporation nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
* \end{itemize}
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
* OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
If You Notice a Problem with the Device
Reset the device. Turn off the power by pressing the reset button on
the back of the device with the tip of a thin paperclip. Press the power
button once again to turn the device on again.
SD Cards
Cards supported by this device
Standard microSDHC
Capacity 4 GB to 32 GB
Speed class Class 10 or above
File system FAT32
Precautions for Using SD cards
When using a commercially available SD card, also check the
instructions supplied with the SD card.
Be sure to format (initialize) an SD card with the device before use.
SD cards have a product lifespan, such as the number of times that
writing can be performed. It is recommended to replace the SD card
with a new one regularly depending on the usage conditions.
When inserting and removing an SD card, confirm the orientation,
do not bend it, and do not apply a strong force or impact to it.
Do not directly touch the contact part with a hand or metal. The
stored data may be damaged or lost due to static electricity.
Be sure to back up (copy) the required files in the SD card to a PC or
other device. The saved data may be lost due to the usage conditions
of the SD card. Please note that JVCKENWOOD cannot compensate
for any damages arising from the loss of saved files.
Format the memory card periodically.
Do not remove the memory card while recording or during playback
because it may corrupt the data on the memory card.
The device may not operate normally if you use an SD card that
was used by another device, such as a computer or digital camera.
Format the memory card in the device.
Depending on the specifications of the memory card, the reading
and writing speeds for the device's data may differ.
Precautions and Notices
Precautions and Notices
Do not operate the device while driving. Using this Warning!
product does not change the requirement for a driver to take full
responsibility for his or her behavior. This responsibility includes
observing all traffic rules and regulations in order to avoid accidents,
personal injury or property damage.
For your own safety, do not operate the controls of the product
while driving.
A window mount is needed when using the recorder in a car. Make
sure that you place the recorder in an appropriate place, so as not to
obstruct the driver’s view or deployment of airbags.
Make sure that no object is blocking the camera lens and no
reflective material is placed near the lens. Please keep the lens clean.
If the car’s windscreen is tinted with a coating, it may impact the
recording quality.
Connect the charger to a proper power source. The voltage
requirements are found on the product case and/or packaging.
Do not use the charger if the cord becomes damaged.
Do not attempt to service the unit. There are no serviceable parts
inside. Replace the unit if it is damaged or exposed to excess
moisture.
Caring for Your Device
Taking good care of your device will ensure trouble-free operation
and reduce the risk of damage.
Keep your device away from excessive moisture and extreme
temperatures.
Avoid exposing your device to direct sunlight or strong ultraviolet
light for extended periods of time.
Do not place anything on top of your device or drop objects on your
device.
Do not drop your device or subject it to severe shock.
Do not subject your device to sudden and severe temperature
changes. This could cause moisture condensation inside the
unit, which could damage your device. In the event of moisture
condensation, allow the device to dry out completely before use.
The screen surface can easily be scratched. Avoid touching it with
sharp objects. Nonadhesive generic screen protectors designed
: Enables the Wide Dynamic Range (WDR) function to improve WDR
the device's image quality under high-contrast lighting conditions.
: Sets the exposure level to adjust the brightness of the image.EV
: Sets the frequency for the camera to avoid problems Frequency
caused by artificial light sources that are not constant.
: Sets the sensitivity level of the G sensor that G-Sensor Sensitivity
triggers the event recording during continuous recording.
Text stamp: Displays customisable text information.
System
: Sets the system date and time.Date/Time
: Enables or disables system notification sounds.System Sound
: Adjusts the volume level.Volume
LCD Standby
: Keeps the LCD on.Always On
: Turns off the LCD (in specified time) but still displays the HUD
time during recording.
/ / : Sets the timer for the LCD to turn off 10 sec 1 min 3 min
automatically after recording starts.
: The system provides 3 memory configurations Storage Allocation
to store the videos and photos. Select the proper configuration
based on your usage.
: Restores the system settings to the factory Restore to Defaults
defaults.
: Displays the software information.Version
Format
Formats a memory card. (All data will be erased.)
Using the PC Application
KENWOOD ROUTE WATCHER II is a PC application for displaying video
recorded with the device.
System Requirements for KENWOOD ROUTE
WATCHER II
OS: Microsoft Windows 10, Windows 8.1, Windows 7*
(except for the Windows 10 Mobile, Windows RT)
* Windows 7 Service Pack 1 must be installed.
OS: Apple Mac OS X 10.11 (El Capitan) or later
Microsoft, and Windows are registered trademark or trademark of
Microsoft Corporation in the US and other countries.
Macintosh, Mac are trademarks of Apple Inc., registered in the U.S. and
other countries.
Installing the Software
Install the software in a computer environment in which you have
administrator's rights.
1 Download the installer from http://www.kenwood.com/cs/ce/
2 Install according to the on-screen instructions
Specications
Screen size
2.7inches color TFT
Operating voltage
DC 5.0V
Current Consumption
480mA (Max.1A)
G-sensor
Built-in
Collision sensitivity
0.5G to 3G (0.5G step)
Image sensor
1/2.7 Color CMOS sensor
Number of Pixel
2M Pixels (1920x1080)
Angles of view
Horizontal : 98°
Vertical : 52°
Diagonal : 114°
Lens
F2.0
Operating temperature
–10 °C to +60 °C
Recording resolution
1920 x 1080 Full HD (Max.2.0M)
Frame rate
30fps
Recording preservation timing
Continuous / Event / Parking
Recording Mode
1 / 3 / 5 min.
Video format
H.264 (MP4)
Picture format
JPEG (Max.1920 x 1080)
Recording media
microSDHC card 4GB to 32GB
Class 10 or above
USB Port
mini USB-B type
Dimensions WxHxD (Main unit)
84mm x 52mm x 31mm
Weight (Main unit)
74g
Accessories
Car charger cord (3.5 m) x 1
Mounting bracket (double-sided
tape) x 1
The specifications and design
are subject to change due to
technological developments.
• The microSDHC logo is a
trademark of SD-3C LLC.
You can check the wireless connection status by the icon on the device.
The device is connected to the smartphone and paired
with the KENWOOD DRV Link app.
The device is not connected to the smartphone.
The device is connected to the smartphone but not
paired with the KENWOOD DRV Link app yet.
Once connected, the event recordings will be automatically transferred
to your smartphone via the KENWOOD DRV Link app.
System Settings
Note: Not all setting items and options are available for all models.
To customise the system settings, press .
File Playback
Plays the recorded videos and photos.
Camera
Press to enter Camera mode.
Wireless LAN
Enables or disables wireless LAN.
Sound Recording
Sets if you want to include sounds in the recordings.
Parking Mode
: When enabled, the device will automatically enters the Detection
Parking mode when the car stops moving for about 5 minutes.
: Sets the parking detection method (triggered Detection Method
by the G sensor, motion detection or both).
: Sets the mode ( , , or ) for Auto Entry Easy Medium Dicult Manual
the system to enter the Parking mode automatically.
Motion Detection: Sets the sensitivity level of motion detection that
triggers the system to save the parking recording.
: Sets the sensitivity level of the G sensor that G-Sensor Sensitivity
triggers the system to save the parking recording.
Video Recording
: Sets the length of each video clip for a Video Clip Length
continuous recording.
Complies with
IDA Standards
DB02771
Product specificaties
| Merk: | Kenwood |
| Categorie: | Camcorder |
| Model: | DRV-W440 |
Heb je hulp nodig?
Als je hulp nodig hebt met Kenwood DRV-W440 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Camcorder Kenwood
21 Maart 2023
27 Februari 2023
24 Januari 2023
Handleiding Camcorder
- Camcorder Braun
- Camcorder HP
- Camcorder Sony
- Camcorder Samsung
- Camcorder Xiaomi
- Camcorder Panasonic
- Camcorder Nikon
- Camcorder Canon
- Camcorder Garmin
- Camcorder JVC
- Camcorder Medion
- Camcorder Olympus
- Camcorder Quintezz
- Camcorder Toshiba
- Camcorder VTech
- Camcorder Abus
- Camcorder Activeon
- Camcorder AEE
- Camcorder Agfa
- Camcorder Agfaphoto
- Camcorder Aiptek
- Camcorder Airis
- Camcorder ATN
- Camcorder Bauer
- Camcorder BenQ
- Camcorder BlackVue
- Camcorder Braun Phototechnik
- Camcorder Bresser
- Camcorder Denver
- Camcorder DJI
- Camcorder Dnt
- Camcorder DOD
- Camcorder Drift
- Camcorder Easypix
- Camcorder EE
- Camcorder Elmo
- Camcorder Ematic
- Camcorder Energy Sistem
- Camcorder Envivo
- Camcorder FHD 1080P
- Camcorder Flir
- Camcorder Fujifilm
- Camcorder Gembird
- Camcorder Genius
- Camcorder Goclever
- Camcorder GoPro
- Camcorder Hama
- Camcorder Hitachi
- Camcorder Hyundai
- Camcorder Iget
- Camcorder Insignia
- Camcorder Insta360
- Camcorder Intenso
- Camcorder Ion
- Camcorder ISAW
- Camcorder Kitvision
- Camcorder Kodak
- Camcorder Kogan
- Camcorder Konica Minolta
- Camcorder Konig
- Camcorder Kyocera
- Camcorder Lamax
- Camcorder Leica
- Camcorder Lenco
- Camcorder Leotec
- Camcorder Lexibook
- Camcorder Linksys
- Camcorder Logitech
- Camcorder Magellan
- Camcorder Maginon
- Camcorder Mamiya
- Camcorder Marshall
- Camcorder Midland
- Camcorder Minolta
- Camcorder Minox
- Camcorder Mio
- Camcorder MMTC
- Camcorder Mobius
- Camcorder Mpman
- Camcorder National Geographic
- Camcorder Nedis
- Camcorder Nikkei
- Camcorder Polaroid
- Camcorder Praktica
- Camcorder Prestigio
- Camcorder Pyle
- Camcorder RCA
- Camcorder Renkforce
- Camcorder Replay
- Camcorder Ricoh
- Camcorder Rollei
- Camcorder Sakar
- Camcorder Salora
- Camcorder Samson
- Camcorder Sanyo
- Camcorder SeaLife
- Camcorder Sencor
- Camcorder Sharp
- Camcorder Silvercrest
- Camcorder SJCAM
- Camcorder Soundmaster
- Camcorder Spypoint
- Camcorder Storex
- Camcorder TacTic
- Camcorder TomTom
- Camcorder Transcend
- Camcorder Traveler
- Camcorder Trust
- Camcorder Uniden
- Camcorder Veho
- Camcorder Viewsonic
- Camcorder Vivitar
- Camcorder Zagg
- Camcorder Zoom
- Camcorder Jay-tech
- Camcorder Jobo
- Camcorder OK
- Camcorder Oregon Scientific
- Camcorder Overmax
- Camcorder Macally
- Camcorder Naxa
- Camcorder T'nB
- Camcorder Cobra
- Camcorder Tracer
- Camcorder Hamlet
- Camcorder Akaso
- Camcorder Trevi
- Camcorder Contax
- Camcorder Hamilton Buhl
- Camcorder Swann
- Camcorder Nilox
- Camcorder Cisco
- Camcorder ARRI
- Camcorder Beaulieu
- Camcorder Bolex
- Camcorder CamOne
- Camcorder Contour
- Camcorder EVOLVEO
- Camcorder RunCam
- Camcorder Whistler
- Camcorder Dragon Touch
- Camcorder Coby
- Camcorder Mediacom
- Camcorder Zorki
- Camcorder Aida
- Camcorder DataVideo
- Camcorder SBS
- Camcorder Blackmagic Design
- Camcorder Contour Design
- Camcorder Kaiser Baas
- Camcorder DXG
- Camcorder Vupoint Solutions
- Camcorder Curve
- Camcorder Kobian
- Camcorder RSC
- Camcorder Stealth Cam
- Camcorder Aqua-Vu
- Camcorder Qoltec
- Camcorder Best Buy
- Camcorder IOPLEE
- Camcorder Microtek
Nieuwste handleidingen voor Camcorder
16 November 2024
14 November 2024
11 November 2024
4 November 2024
3 September 2024
15 Augustus 2024
15 Augustus 2024
15 Augustus 2024
15 Augustus 2024
14 Augustus 2024