Kenton Killamix Mini Handleiding

Kenton DJ Gear Killamix Mini

Lees hieronder de 📖 handleiding in het Nederlandse voor Kenton Killamix Mini (12 pagina's) in de categorie DJ Gear. Deze handleiding was nuttig voor 99 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/12
KILLAMIX-MINI
COMPACT USB CONTROLLER
User Manual
Serial numbers N2-0433 onwards (non-click encoders)
Suitable for use only with computers running Windows XP / Vista / 7 - Mac OS-X (10.2 onwards)
& Linux (kernel 2.5 onwards)
2
__________________________________________________________________________
FCC STATEMENT FOR KILLAMIX MINI
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
______________________________________________________________________
3
The compact USB controller is housed in a sturdy brushed aluminium case with Killamix-Mini
solid aluminium knobs. It is the perfect companion to your laptop, whether you are using a
sequencer, DJ-ing or VJ-ing, just plug in the USB cable and go. Despite having only 9 knobs, 9
buttons and a joystick, the Killamix-Mini can in effect be 144 knobs, 144 buttons and a joystick.
By pressing a single knob you can select any MIDI transmit channel from 1 to 9, or with a
combination of two knobs, select the remaining channels 10 to 16. When you select a new
MIDI channel, the current values of the knobs for that channel are stored so that they can be
restored when you next select this channel, thus avoiding any parameter jump difficulties
typical of units with traditional knobs and faders. When the values are restored, the LED rings
around the knobs indicate their new positions.
The 9 rotary encoders
The encoders send controller messages (CCs) when turned. The leftmost encoder always
sends CC#1, the next one CC#2 and so on until the rightmost one which sends CC#9. As the
encoders are turned, the LED rings around the encoders indicate the position that the knob is
in. If you change MIDI channel by pressing a knob, the true position of the knob will be stored
so that when you later return to the same channel, the knob will continue sending from where it
previously left off and the LED ring will be updated to indicate that position. When the Killamix
Mini is powered on after having been off, it will revert to the channel and data values last
saved (by pushing a knob) – so if you want to save the exact current state of the unit before
powering down, you should press the knob(s) for the currently selected channel first.
As mentioned above, pressing any knob will change the MIDI transmit channel to that
indicated beneath it, so pressing knob #9 (the rightmost one) will select MIDI channel #9. The
LED above the knob will light to indicate the current channel. When a new channel is selected,
any knob or switch values which have changed (on any channel) will be stored, then the
values for the new channel will be indicated by the LED rings. To select MIDI channels 10 to
16 you need to press two knobs in combination. Press and hold knob #9 then press one of the
other knobs 1 to 7. Adding the two numbers together gives the final channel number, so knob
#9 plus knob #3 gives channel 12, and knob #9 plus knob #7 gives channel #16. There will be
two LEDs lit above knobs for channels 10 –16. A CC#23 message is sent on the new channel
when selected for software which can make use of this.
When turned very slowly, the encoder data values change (increment or decrement) 30 times
each revolution. When turned faster (normal speed) the encoder values will change 60 times
per revolution. If the encoder knobs are turned very fast, the encoder values will change 60
times per revolution but 3 at a time so making the whole range (0-127) in less that one turn,
allowing you to go from one end of the data scale to the other in one twist of the knob. Turning
the knob further after maximum or minimum position has been reached will continue to send
the same max or min data. You cannot step from max to min or vice versa.
It is possible to configure the encoders to send controller incremental messages instead of
standard messages. Also the controller numbers can be offset from their default values. See
“Configuring extra operational modes” section on page 6.
When getting software to learn controller messages from the knobs, we recommend that you
set all the knobs to somewhere near the centre position (as indicated on the ledrings) before
initiating the learn process. We have found this to produce the most reliable results.

Product specificaties

Merk: Kenton
Categorie: DJ Gear
Model: Killamix Mini

Heb je hulp nodig?

Als je hulp nodig hebt met Kenton Killamix Mini stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding DJ Gear Kenton

Kenton

Kenton Pro Solo Mk3 Handleiding

29 Mei 2023
Kenton

Kenton Killamix Mini Handleiding

27 Mei 2023

Handleiding DJ Gear

Nieuwste handleidingen voor DJ Gear

Yamaha

Yamaha FW16E Handleiding

14 December 2024
MWM

MWM Essential Phase Handleiding

10 December 2024
Pioneer

Pioneer HDJ-X5-K Handleiding

7 December 2024
Pioneer

Pioneer OPUS-QUAD Handleiding

7 December 2024
Pioneer

Pioneer RB-DMX1 Handleiding

7 December 2024
Audio-Technica

Audio-Technica AT6006R Handleiding

6 December 2024
Audio-Technica

Audio-Technica AT-XP7 Handleiding

6 December 2024
Vonyx

Vonyx DB10 Handleiding

4 December 2024
Vonyx

Vonyx DB20 Handleiding

4 December 2024
Korg

Korg PuttRhythm Handleiding

2 December 2024