Kendall Howard 5500-3-004-35 Handleiding

Kendall Howard Tafel 5500-3-004-35

Lees hieronder de đź“– handleiding in het Nederlandse voor Kendall Howard 5500-3-004-35 (2 pagina's) in de categorie Tafel. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
®
Tools Needed:
Step 1: Step 2:
Step 3:
Screwdriver
What’s Included:
QTY 1: Right
Leg Assembly
QTY 1: Le
Leg Assembly
QTY 1: Modesty
Panel QTY 1: Table Top
QTY 4:
Levelers
QTY 4:
End Caps
QTY 1: Modesty
Panel Grommet
QTY 1:
Surface
Grommet
QTY 25:
1/4-20”
Screws
Step 4:
A. Posiîžźon table top with smooth surface facing down.
B. -Line up leg assemblies with pre drilled hole paîž©ern.
(Note: Shorter side of legs face back of the table.)
C. - Fasten to table top with 1/4 20” screws.
*If installing the Cable Management Enclosure, leave out
the back two screws in the legs.
A. Aach modesty panel to the back edge of the right and le
leg assemblies. (Ensure the grommet opening is closest to
the work surface.)
B. - Fasten with 1/4 20” screws.
*If not installing the Cable Management Enclosure, ll in
addiîžźonal threaded holes in modesty panel with addiîžźonal
screws.
*If installing the
Cable Management
Enclosure, proceed
to mount that to the
modesty panel
before assembling
the panel to the
training table.
A. Insert levelers into the threaded inserts in the boîž©om
of the leg assemblies.
B. Insert end caps into base of each leg.
A. Set the training table height on each leg assembly by
unscrewing and sliding the leg to the desired posiîžźon.
B. Re- insert screws to secure.


Product specificaties

Merk: Kendall Howard
Categorie: Tafel
Model: 5500-3-004-35

Heb je hulp nodig?

Als je hulp nodig hebt met Kendall Howard 5500-3-004-35 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Tafel Kendall Howard

Handleiding Tafel

Nieuwste handleidingen voor Tafel