Kanto YUP6 Handleiding

Kanto Speaker YUP6

Lees hieronder de 📖 handleiding in het Nederlandse voor Kanto YUP6 (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 108 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/12
Supporting your digital lifestyle™
POWERED SPEAKERS
English
User Manual
YU6 Powered Speaker
2
Important Safety Precautions
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
ampliî ´ers) that produce heat.
• Protect the power-supply cord from being walked on or
pinched, particularly at plugs, convenience receptacles
and the point where they exit from the apparatus.
• Only use attachments / accessories specied by the
manufacturer.
• Use only with the cart, stand, tripod, bracket, or table
speciî ´ed by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when
unused for long periods of time.
• Refer all servicing to qualied service personnel. Servicing
is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or
moisture, the apparatus does not operate normally, or
the apparatus has been dropped.
• Apparatus shall be connected to a MAINS socket outlet
with a protective earthing connection.
• An appliance input coupler is used as the disconnect
device - the disconnect device shall remain readily
operable.
• Batteries or battery packs shall not be exposed to
excessive heat such as sunshine, î ´re or the like.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
BACK PANEL.NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
DANGEROUS VOLTAGE
The lightning î ľash with arrowhead, within an
equilateral triangle, is intended to alert the user of
the presence of non-insulated “dangerous voltage”
within the product’s enclosure that may be of
sucient magnitude to constitute a risk of electric
shock to persons.
ATTENTION
The exclamation point within an equilateral
triangle is intended to alert the user of
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the apparatus.
FCC Notice:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected
- Consult the dealer or an experience radio / T V technician for help
NOTE 2: Any changes or modiî ´cations to this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Industry Canada Notice:
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
This device complies with Canadian ICES-003 and RSS-210
3
Supporting your digital lifestyle
™
Introduction
YU6 Active
Speaker
(Left Channel)
YU6 Passive
Speaker
(Right Channel)
AUXRCA OPT2OPT1
BALANCE
TREBLEBASS
YU6
Remote
Power
Cord
x8
Self-Adhesive
Rubber Feet
3.5 mm cable
AUX
Speaker
Wire
User
Manuals
x3
x2
‘AAA’
Batteries
What’s In the Box?
Thank you for choosing YU6 outputs YU6 Powered Speakers, designed by Kanto in Canada.
200W Peak power into 6 Ohm speakers, for remarkably bold and clean sound. Excellent
sensitivity and frequency response provide deep thumping lows and clear, scintillating highs.
YU6 is an amazingly î ľexible speaker system that can accept î ´ve input sources and connect to
a subwoofer for enhanced low frequency response. Additionally, it is equipped with the latest
Bluetooth technology and a USB port for charging your devices. YU6 has a universal input
power supply and can be used worldwide from 110V AC to 240V AC.
We recommend you read all instructions carefully before using the system and keep them for
future reference. Kanto cannot be liable for damage or injury caused by incorrect setup or
use of this product.
This powered speaker system was carefully tested and inspected during production,
and before packaging and shipping. After unpacking, please check for any damage. It
is rare that a unit is damaged during shipping, but if this happens contact your retailer
immediately. You can also contact Kanto directly using one of the methods below.
Email: support@kantoliving.com
Toll Free: US & Canada: 1-888-848-2643 | UK: +44 800086999

Product specificaties

Merk: Kanto
Categorie: Speaker
Model: YUP6

Heb je hulp nodig?

Als je hulp nodig hebt met Kanto YUP6 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker Kanto

Kanto

Kanto REN Handleiding

11 December 2024
Kanto

Kanto ORA4 Handleiding

11 November 2024
Kanto

Kanto ORA Handleiding

7 December 2023
Kanto

Kanto YU6 Handleiding

1 Juli 2023
Kanto

Kanto SYD Handleiding

28 Juni 2023
Kanto

Kanto YU Passive Handleiding

27 Juni 2023
Kanto

Kanto YU Handleiding

26 Juni 2023
Kanto

Kanto YU2 Handleiding

26 Juni 2023
Kanto

Kanto TUK Handleiding

13 Juni 2023
Kanto

Kanto YU4 Handleiding

13 Juni 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Sven

Sven MC-5 Handleiding

20 December 2024
Sven

Sven SPS-535 Handleiding

20 December 2024
Devialet

Devialet Mania Deep Handleiding

19 December 2024
Kicker

Kicker Premium 51MSC65 Handleiding

18 December 2024
Kicker

Kicker Premium 51MSC8 Handleiding

18 December 2024
Monitor Audio

Monitor Audio Apex A10AV12 Handleiding

17 December 2024
Audac

Audac ATEO6M Handleiding

17 December 2024
Audac

Audac CIRA724I Handleiding

17 December 2024
NGS

NGS WILD Space 3 Handleiding

16 December 2024
HK Audio

HK Audio LINEAR 3 112 XA Handleiding

16 December 2024