K-rain RPS 624 Handleiding
K-rain
Besproeiingscomputer
RPS 624
Lees hieronder de đź“– handleiding in het Nederlandse voor K-rain RPS 624 (36 pagina's) in de categorie Besproeiingscomputer. Deze handleiding was nuttig voor 77 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/36
STATION MODELS – Available in 6, 9, 12, 18 and 24 stations
OUTDOOR MODEL – Supplied with a 120VAC x 24VAC inbuilt transformer
(or 240VAC 50Hz for international)
INSTRUCTION MANUAL
0207P8011_RPS624_Instruction_Manual-FINAL-USA.indd 1 21/08/2015 9:13 am
Introduction 1
Glossary 2
Key Features 3
Programming Instructions
Introduction 4
Set automatic program 4
Programming example 5
Spare watering planner 6
General tips for easy programming 7
Programming
Set current time & correct day 8
Set calendar 8
Set start times 9
Set watering days 10-11
Set station run times 11-12
Manual Operations
Run a single station 13
Current test feature 13
Run a program 14
Manually test all stations 15
Stop watering 16
Stacking start times 16
Automatic back up 16
Other Features
Rain sensor 17
Rain delay 18
STOP all watering 18
Dual pump selection 18
Water budgeting & seasonal
adjustment
19
Special Functions
Current sensing and faulty 20
station skip --
Fault indication feature 20
Clearing the programs 21
Program rescue feature 21
Installation Instructions
Mounting the controller 22
Electrical hook-up 22
Field wiring connections 22-23
Terminal block layout 23
Pump Start Relay Connection 24
Single phase pump installation 24
Master valve installation 25
(including rain sensor )
Power supply connections 25
Station (valve) installation 26
Pump protection (system test) 27
Fault Finding Guide 28-29
Electrical Characteristics 30
Electrical outputs 30
Electrical power supply 30
Overload protection 30
Power failure 30-31
Servicing the controller 31
Spare watering planner 32-33
Guarantee
CONTENTS
0207P8011_RPS624_Instruction_Manual-FINAL-USA.indd 2 21/08/2015 9:13 am
1
RPS624 is available in 6, 9, 12, 18 and 24 station conî‚żgurations. Designed to
cover a wide range of applications from residential and commercial turf, to light
agriculture, and professional nursery.
This controller has a possible 6 separate programs with up to 24 starts per day.
The controller has a 7 day watering schedule with individual day selection per
program or a 365 calendar for odd/even day watering or selectable interval watering
schedules from every day to every 15th day. Individual stations can be allocated to
one or all programs and can have a run time of 1 minute to 12 hours 59 minutes or 25
hours if the water budget is set to 200%. Now with “Water Smart Seasonal Set” which
allows the automatic run times to be adjusted in percentage from “OFF” to 200% per
month.
K-RAIN has always been concerned with sustainable water usage. The controller
has many water saving features that can be used to maintain the highest standard
of plant quality with the least amount of water consumption. The integrated budget
facility allows global changes of run times without affecting programmed run times.
This allows for decreasing total water consumption on days of minimal evaporation.
INTRODUCTION
CORRECT POWER UP PROCEDURE
Note: The blue backlit display will only light up when connected to AC power.
1) Connect to AC Power
2) Pull Tag on Coin Battery
3) Install 9V Battery. The 9V Battery is important as it inceases the life of the
coin battery.
Note: The batteries will maintain the clock but will not light up the display.
0207P8011_RPS624_Instruction_Manual-FINAL-USA.indd 1 21/08/2015 9:13 am
Product specificaties
Merk: | K-rain |
Categorie: | Besproeiingscomputer |
Model: | RPS 624 |
Heb je hulp nodig?
Als je hulp nodig hebt met K-rain RPS 624 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Besproeiingscomputer K-rain
15 September 2023
15 September 2023
15 September 2023
Handleiding Besproeiingscomputer
- Besproeiingscomputer Gardena
- Besproeiingscomputer Hunter
- Besproeiingscomputer RAINBIRD
- Besproeiingscomputer Oase
Nieuwste handleidingen voor Besproeiingscomputer
9 Oktober 2023
9 Oktober 2023
9 Oktober 2023
9 Oktober 2023
9 Oktober 2023
9 Oktober 2023
9 Oktober 2023
9 Oktober 2023
9 Oktober 2023
9 Oktober 2023