Jysk Stavanger Handleiding

Jysk Desktop Stavanger

Lees hieronder de 📖 handleiding in het Nederlandse voor Jysk Stavanger (55 pagina's) in de categorie Desktop. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/55
1/55
STAVANGER 3690210
3690211
349870.0
1600 mm
680 -1180 mm
800 mm
3690210 3690211 2/55
GB : TABLE OF CONTENT
1. SAFETY AND WARNINGS
2. USAGE
3. SET UP AND INSTALLATION
4. OPERATION
5. MAINTENANCE AND DEFECTS
6. TECHNICAL DATA
7. PARTS
8. ASSEMBLY DIRECTIONS
9. DECLARATION OF CONFORMITY
IMPORTANT NOTES !
Prior to installation, use and main-
tenance of the table frame, any
installer and any user of the table
must study this assembly
and operation manual carefully,
so as to gain a complete under-
standing of its contents !
1. SAFETY AND WARNINGS
This table complies with the prescribed safety regulations. Inappropriate use may cause damage
to persons and table. Please read the operation manual prior to using the table.
It provides you with important information about safety, use, installation and maintenance of the table,
and thus protecting you and your children and avoiding damage on the table. Please guard this operation
manual and pass it on to any future owner !
WARNING : FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUC -
TIONS AND WARNINGS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY.
2. USAGE
– The electromotive, height-adjustable tables are designed for workstations in dry work environments only
( 0 - 40° C ; 20 - 90 % relative humidity ). The table height is innitely adjustable, so that it can be set to the 
most ergonomically suitable working level.
– They have not been designed for other purposes than those included in this manual, e.g. they are not to be
used in areas of high humidity or dampness, nor for lifting people. Any other use is at one’s own risk !
– Do not crawl, lie or move around under the table frame, and do not sit or stand
on the table frame.
– CHILDREN should only use the table when supervised by adults.
– Liability : The manufacturer accepts under no circumstances warranty claims or liability claims for damages
arising from improper use or handling of the table frame other than that described in this operation manual.
3. SET UP AND INSTALLATION
When the table has been assembled ( see assembly instructions in CHAPTER 8 ) the adjustable feet are installed
so that the table is level and does not shift. Then the table is connected to the 100 - 240 VAC outlet and the
table is ready for use.
– Make sure that no cables can get jammed.
– Place the table in a safe distance from window frames, radiators, furniture etc. so that people
do not get stuck.
– Do not place any objects above 55 cm underneath the table.
– When moving the table after it has been assembled, the table top needs to be removed. The table CANNOT
be lifted by the table top. The desk need to be lowered to minimum height before moving.
3690210 3690211 3/55
4. OPERATION
UP / DOWN operation :
Push "Up" button to move table up and "Down" button to move table down.
5. MAINTENANCE AND DEFECTS
– The table does not require any maintenance by usage as described in chapter 2 in the directions for use.
– The table is only to be maintained with a damp cloth.
– In the event of the occurrence of jarring sounds during operation, STOP using the table.
6. TECHNICAL DATA
Frame, materials : Steel, powder lacquered
Tabletop material: Chipboard with melamine
Weights :35 kg
Width : 160 cm
Depth : 80 cm
Height : 68 - 118 cm
V ( speed ) : ~ 25 mm / sec. – depends on load
Duty cycle :10 % by 50 % of max. working load on frame or max. 2 min. continuously
Operation : Micro switches
Voltage : 200 -240 VAC
|
50 / 60 Hz
Standby consumption : < 0,15 Watt
Max. working load :50 kg
Above specications may vary depending on local temperature, humidity and input voltage.
7. PARTS
See page 50 - 51.
8. ASSEMBLY DIRECTIONS
See pages 52 - 55.
9. DECLARATION OF CONFORMITY
We hereby declare, under our sole responsibility that the following products :
– Sit and stand table product type STAVANGER.
is in accordance with :
– Directive 2006 / 42 / EF of The European Parliament and of the Council of 17 May 2006 on machinery
and on changes of directive 95 / 16 / EF
With reference to the above please be aware that :
– the sit and stand table is considered a machine and
– the sit and stand table may not be used until it has been assembled and installed according
to the instructions.
Produced for : Manufacturer :
JYSK A / S 2- connect ApS
Sødalsparken 18 · 8220 Brabrand Lene Haus Vej 9 · 7430 Ikast
DK- Denmark DK- Denmark
Tlf.: + 45 89 39 75 00 · Fax : 89 39 75 01 Tlf.: + 45 97 15 77 77 · Fax : +45 97 15 66 44
www.2-connect.dk
UP button
DOWN button


Product specificaties

Merk: Jysk
Categorie: Desktop
Model: Stavanger

Heb je hulp nodig?

Als je hulp nodig hebt met Jysk Stavanger stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Desktop Jysk

Handleiding Desktop

Nieuwste handleidingen voor Desktop