JVC XL-PG300Y Handleiding

JVC CD-spelers/recorder XL-PG300Y

Lees hieronder de 📖 handleiding in het Nederlandse voor JVC XL-PG300Y (3 pagina's) in de categorie CD-spelers/recorder. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

432

VOLUME

R L

OFF ON

HOLD

0102 35

ButtonOperation

To pause

To stop

To turn off the

unit

Fast forward/

reverse

Display/reference

07 00 81

1044 84

Skip function

During play,

Search function

Keep depressed during play.

• Play stops automatically

when all the tracks have

been played.

For your reference:

“dISC”

This indication appears if is pressed when no disc is loaded3 8/

or if the disc is not properly seated.

“– –”

Preparation period before playing the track

Flashes for several seconds after pressing to play.3 8/

“OPEn”

This indication appears when the lid is open.

Removing discs

Turn off the unit and, after the disc has stopped rotating, remove

the disc as shown below:

Auto power off

If the unit is left in stop mode for 30 seconds, the unit turns

itself off automatically to prevent the batteries from running

down.

Disc rotation noise

The portable CD player uses a power-saving operation method

so that disc rotation noise will intermittently be emitted. But, it

is not a failure.

• To skip back to the previous track, quickly press 4

twice.

• During Program play, the button is used to fast for-

ward or back through the programmed sequence of

tracks.

• During Random play, the skip button cannot be used

to skip back to tracks that were played previously in

the random sequence.

During play,

Reverse

Basic Play

Total number of tracks

Total playing time.

Label side

Elapsed playing time of

each track

No indication

Intro play

You can successively play the first 10 seconds of every track.

1While stopped,

INTRO

MODE

To cancel

Press MODE repeatedly until “INTRO” goes out.

Notes:

• You can also select Intro play during playback.

In this case, Intro play will start from the next track after the

current track has finished.

• You can also select Intro play during Program play mode.

Random play

During playback,

MODE

RANDOM

After playing all tracks, the unit stops.

To cancel

Press MODE until “RANDOM” goes out, or press to stop the7

disc.

Notes:

• You can also select Random play in stop mode.

• During Program play, you can not select Random play.

Program play

You can program up to 32 tracks in any desired order including

the same tracks.

1While stopped,

PROG

00 01

PROGRAM

2Select the desired track.

PROG

03 01

PROG

PROGRAM

The track is registered.

Repeat steps 2 and 3.

When you program exceeding 32 tracks, the program se-

quence number returns to “01” and will overwrite the previ-

ous setting.

• To confirm the program

While stopped, press PROGRAM repeatedly. At this time, you

can change the program, if required.

• To delete the entire program

Turn off the unit.

Program sequence

number

Track number to be programmed

00: Not programmed yet.

e.g. Track number 3

Repeat play

You can repeat one track or all tracks.

During playback,

MODE

ALL

To cancel

Press MODE repeatedly until the repeat indicator goes out.

Notes:

• You can also select Repeat play during Program play.

• You can also select Repeat play while stopped.

Hyper-Bass Sound effect

You can enjoy powerful bass sound.

OFF 21

HBS

Anti-Shock Protection EX

This function achieves excellent performance against sound inter-

ruption caused by vibrations. You will be able to enjoy listening

to music during (not vigorous) jogging.

By utilizing the high-performance servo circuit, audio data will be

stored in the memory ahead of time (up to 45 seconds worth).

Normally, this function is in effect.

A NT I

SH OC K

As the audio data is gradually stored, the indicator changes as follows:

To cancel

A.S.P

The “ANTI SHOCK” indicator goes out.

To activate again

Press the ASP button.

Notes:

• During this operation, the disc rotates at a higher rate than usual

in order to collect extra audio data. This may cause the batteries

to run out faster and could result in a slight increase in disc rota-

tion noise.

• This function can be switched ON and OFF during playback.

However, this may cause a slight interruption in the sound be-

cause the disc’s rotational speed changes.

[Fully stored]

ANTI SHOCK

indicator

(Repeatedly)

Next program sequence number

(Repeatedly)

Other Play Methods

(Repeatedly)

Power Supply Preparations

The illustration of the grip band is omitted.

Using dry-cell batteries

(not supplied)

Caution:

Do not forcibly open the battery lid too wide.

Battery indicator

This indicator appears when the batteries are almost out of power.

Power will be cut off a short while later.

Note:

Turning off the Anti-Shock Protection EX will save the battery power

more or less. For details, see “Anti-shock Protection EX” on page 4.

Battery indicator

AC adaptor

Using the AC adaptor (not supplied)

Notes:

• Even if the unit is turned off, small power is consumed as long

as the AC adaptor is connected to the AC power outlet.

• When you want to purchase the AC adaptor, see page 5.

AC power outlet

• When the unit is in Hold mode, “HoLd” and “ ” lights as

follows.

Power on : “ ” stays lit.

Power off : “HoLd” and “ ” lights up for a few seconds

when 6 is pressed.

Note:

If the HOLD switch is set to the ON position, you cannot turn on

the unit.

This function causes the unit to ignore, accidental button presses.

Hold mode prevents the following:

• Powering on the unit accidentally (which can cause the batter-

ies to go dead).

• Play being cut off unexpectedly.

To use the Hold mode

OFF ON

HOLD

• To prevent the unit from powering on accidentally, set the

HOLD switch to the ON position while the unit is turned off.

• To prevent the unit from unexpected operation during play,

set the HOLD switch to the ON position after you starts play-

ing the disc.

Preventing Accidental Operation (Hold mode)

The illustration of the grip band is omitted.

Follow the steps in the numerical order.

Two “AA” (LR6) alkaline batteries.

AC adaptor (for multi voltage area only)

(not supplied)

Before use

Make sure the present voltage of your AC adaptor fits to your lo-

cal voltage before plugging it into the AC power outlet. If it

doesn’t, shift the AC line-voltage selector with a screwdriver so

that it corresponds to your local voltage.

VOLTAGE

ADJUSTOR

AC 110V

~127V

AC 220V

~240V

If the power plug will not fit your socket, use the AC plug adaptor.

How to use the AC plug adaptor (not

supplied)

Note:

When you want to purchase the AC adaptor and the AC plug

adaptor, see page 5.

Track number in play

Firmly connect

Forward

While stopped,

Press again to restart play.

5 16

Stereo headphones .......................................................................................................................... 1 pc.

Supplied Accessories

Concerning Compact Discs

PORTABLE CD PLAYER XL-PG300A/XL-PG300B/

XL-PG300Y

INSTRUCTIONS

Thank you for purchasing this JVC product. Please read these instructions carefully before starting

operation to be sure to obtain optimum performance and a longer service life from the unit.

Only compact discs bearing this mark can be used with this unit.

However, continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage

the unit.

If moisture has formed on a disc

When moisture has formed because the

disc was brought suddenly into a warm

room from a cold environment, wipe off

the moisture using a soft dry cloth.

When storing discs

Avoid locations which are

•Exposed to direct sunlight.

•Susceptible to high levels of humidity or

dust.

•Directly exposed to heat from a heating

appliance.

•On top of a car dashboard or near the

rear window.

Handling precautions

•On the label side (the side with writing)

Do not write anything using a pencil,

ball-point pen, etc. Do not use adhesive

paper or labels.

•On the disc (shiny) side

Handle this side carefully to keep it free

from fingerprints or scratches. Do not

use record cleaners, solvents, etc.

•Do not attach labels or stickers to CDs.

Do not use CDs with exposed adhesive

from tape or left over peeled off stickers.

•Do not use scratch-proof protectors or

covers other than those specified for use

with this unit.

If the disk surface is dirty

Wipe it with a damp cloth and then wipe dry.

Wipe from the center toward the outer edge.

How to hold a disc

How to store the disc in

its case

How to remove a disc from its case

Label side up

LVT1178-001A [J,C,UJ]

CD-R and CD-RW discs recorded with the audio

CD format can be played back, though some may

not be played back because of the disc character-

istics or recording condition.

Play surface (shiny surface)

For Customer Use:

Enter below the Model No. and Serial

No. which are located either on the rear,

bottom or side of the player. Retain this

information for future reference.

Model No.

Serial No.

0204SKMCREORI

Put the grip band on your hand

Adjust the grip band to your hand size.

Unit

Wipe the unit with a soft cloth. Remove stubborn dirt using a cloth which has been dipped in wa-

ter or soapy water and wrung out, and then wipe dry.

• If you intend to use a chemically treated cleaning cloth, read its directions first.

•Do not use alcohol or paint thinners.

Lens

Maintenance

Air blower for

camera lens

Lens

Precautions

Safety

1. Care of AC adaptor - The cord of the AC adaptor should be

routed so that they are not likely to be walked on or pinched by

items placed upon or against them. Never take hold of the AC

adaptor if your hand is wet, and always grasp the plug when

connecting or disconnecting it.

2. Disconnect when not in use - When not in use, be sure to dis-

connect the AC adaptor from the AC power outlet.

3. Batteries - If the unit is not used for a long period of time or is

used only from an AC power source, remove all the batteries to

prevent potential damage due to battery leakage. Do not mix

(old and new ) batteries or different types of batteries.

Installation

■ Environment

1. Condensation - Moisture may form on the lens in the follow-

ing conditions…

•immediately after a heater has been turned on.

•in a steamy or very humid room.

•when the unit is suddenly moved from a cold environment to

a warm one. If moisture forms inside this unit, it may not op-

erate properly. To correct this problem wait about one hour

for the moisture to evaporate.

■ Placement

1. Foreign Material - Care should be taken so that objects do not

fall into and liquids are not spilled into the unit. Do not subject

this unit to excessive smoke, dust, mechanical vibration, or

shock.

2. Magnetism - The unit should be situated away from equipment

or devices that generate strong magnetic fields.

3. Stacking - Do not place any objects on top of the unit.

Maintenance

(See page 5 for details.)

Clean the cabinet, panel and controls with a soft cloth lightly

moistened with mild detergent solution.

Do not use any type of abrasive pad, scouring powder or solvent

such as alcohol or benzine.

Service

1.Damage Requiring Service - The unit should be serviced by

qualified service personnel when:

(a) The AC adaptor is damaged; or

(b) Objects have fallen or liquid has been spilled into the unit; or

(d) The unit does not appear to operate normally or exhibits a

marked change in performance; or

(e) The unit has been dropped, or the enclosure damaged.

THE FOLLOWING NOTICES ARE APPLIED ONLY FOR THE U.S.A.:

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE

OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

CAUTION!

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio com-

munications. However, there is no guarantee that interfer-

ence will not occur in a particular installation. If this

equipment does cause harmful interference to radio or televi-

sion reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and re-

ceiver.

•Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician

for help.

Any unauthorized changes or modifications to this equip-

ment would void the user s authority to operate this device.’

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

•Do not block the ventilation opening or holes. (If the venti-

lation openings of holes are blocked by a newspaper or

cloth, etc., the heat may not be able to get out.)

•Do not place any naked flame sources, such as lighted

candles, on the apparatus.

•When discarding batteries, environmental problems must

be considered and local rules or laws governing the dis-

posal of these batteries must be followed strictly.

•Do not expose this apparatus to rain, moisture, dripping or

splashing and that no objects filled with liquids, such as vases,

shall be placed on the apparatus.

This Class B digital apparatus complies with Canadian

ICES-003.

Cet appareil numérique de la classe B est conforme laà

norme NMB-003 du Canada.

Check this

•Is the AC adaptor securely connected?

•Is the HOLD switch set to OFF position?

Is the disc properly secured in place?

•Is the disc properly secured in place?

•Is there moisture condensation on the lens?

(Wait for about an hour and then try again.)

•Is the headphone plug inserted all the way?

•Is the plug dirty? (Wipe away dirt on the plug.)

Are you using the unit too near a TV or tuner? (If the TV or

tuner is connected to a simple indoor antenna, connect it to

an outdoor antenna.)

•Is the disc damaged?

•Is the disc playable on this player?

•Has the disc been inserted upside down?

Problem

Does not turn on.

Cannot close the lid.

Cannot play discs.

Cannot hear music—too

noisy.

TV picture is distorted.

Radio reception is noisy.

“ ” “ ”dISC or Er is displayed

when a disc is in the

player.

Troubleshooting

If the remedies indicated in the chart do not solve the problem, refer to the directory of Autho-

rized Service Centers (enclosed with this unit) to locate a convenient service center, or consult

your dealer for instructions.

Portable CD player

Type : Compact disc player

Signal detection system : Non-contact optical pickup (semiconductor laser)

Pickup system : 3 beam laser

Number of channels: : 2 channels (stereo)

Frequency response : 20 Hz to 20 kHz

Wow & flutter : Unmeasurable

Output : Headphones (3.5 mm dia. stereo × 1)

9 mW/ch at 10 % THD/16 matching impedance (16 Ω Ω to 1 kΩ)

Duration of battery : Approx. 30 hours when using two alkaline batteries (LR6)

(with Anti-Shock

Protection EX OFF)

Power requirements : DC 3 V (“ ”AA or “ ”R6 size battery × 2)

DC 2.4V (rechargeable battery 2)×

DC IN 4.5 V

Dimensions (W × × × ×H D) : 133.2 mm 30.8 mm 146.8 mm (5- 1/

4” 1-× 1/

4” × 5- 13/

16”)

(Excluding buttons and controls)

Mass : 250 g (0.56 lbs)

(with grip band, without batteries)

AC adaptor (not supplied)

Input power source : AC 120 V, 60 Hz (for the U.S.A. and Canada)

AC 110V - 127V/220 V - 240V, 50/60 Hz (for multi voltage area)

Output voltage : DC 4.5 V, 600 mA

* Design and specifications are subject to change without notice.

Specifications

Cautions

Listening precautions

Do not play your headphones or earphones at a high volume.

Hearing experts advise against continuous extended play.

If you experience a ringing in your ears, reduce volume or discon-

tinue use.

Do not use while operating a motorized vehicle. It may create a

traffic hazard and is illegal in many areas.

You should use extreme caution or temporarily discontinue use

in potentially hazardous situations.

Even if your headphones or earphones are an open-air type de-

signed to let you hear outside sounds, don t turn up the volume’

so high that you can t hear what s around you.’ ’

Sound can be deceiving. Over time your hearing comfort level“ ”

adapts to higher volumes of sound. So what sounds can“ ”normal

actually be loud and harmful to your hearing.

Guard against this by setting your equipment at a safe level BE-

FORE your hearing adapts.

To establish a safe level:

•Start your volume control at a low setting.

•Slowly increase the sound until you can hear it comfortably and

clearly, and without distortion.

Once you have established a comfortable sound level:

• Set the dial and leave it there.

Rechargeable batteries

•Rechargeable batteries (not supplied) can be used.

•To use the rechargeable batteries, follow the instruction manual

attached to the rechargeable batteries and charger (not sup-

plied).

Dry cell batteries

To prevent damage to the batteries and electrolyte leakage, heed

the following points.

•Align the , . and polarities properly when inserting the bat-

teries.

•Do not mix different types or makers of batteries or old and

new batteries.

•Remove the batteries if you do not plan to use the unit for a

long period of time.

•Do not throw batteries into a fire, and do not short-circuit, dis-

assemble or subject them to excessive heat.

•Do not attempt to recharge dry cell batteries.

Carrying dry cell batteries around

When putting dry cell batteries in a pocket or bag, ensure that no

other metal objects such as a necklace are placed together with

them. Contact with metal may cause short-circuiting which, in

turn, may cause a fire.

AC adaptor

•Handle the AC adaptor carefully. Improper handling is dan-

gerous.

• Do not touch it with wet hands.

• Do not place heavy objects on top of it.

• Do not forcibly bend it.

•Be sure to connect only the specified AC adaptor with the unit.

•Disconnect the AC adaptor from the power outlet if the unit is

not going to be used for a long time.

Unit

No altering or remodeling

This can cause malfunctioning.

No dropping or strong impacts

This may damage the unit.

Locations to be avoided

Avoid using the unit in the following locations since they can

cause malfunctioning.

1. Bathrooms and other moisture-prone places.

2. Warehouses and other dusty places

3. Very hot places near heating appliances, etc.

Do not leave the unit exposed to direct sunlight for

long periods of time

This may deform or discolor the cabinet and may also cause mal-

functioning.

When purchasing AC adaptor /

AC plug adaptor

Be absolutely sure to purchase the AC adaptor / AC plug adaptor

designed especially for this unit.

AC adaptor: AA-R4513 (for the U.S.A. and Canada)

AA-R4516 (for multi voltage area)

AC plug adaptor: QAM0060-001 (for multi voltage

area)

For details, check with your dealer.

•

ES T . 1924

INFORMATION (For Canada)

This digital apparatus does not exceed the Class B limits for radio

noise emissions from digital apparatus as set out in the

interference-causing equipment standard entitled “Digital

Apparatus , ICES-003 of the Department of Communications.”

VARNING: Synlig Och

osynlig laserstrålning när

den öppnas och spärren är

urkopplad. Betrakta ej

strålen. (s)

CAUTION: Visible and invisible

laser radiation when open and

interlock failed or defeated.

AVOID DIRECT EXPOSURE TO

BEAM. (e)

ADVARSEL: Synlig og usynlig

laserstråling når maskinen er

åben eller interlocken fejle.

Undgå direkte eksponering

til stråling. (d)

VARO: Avattaessa ja

Suojalukitus ohitettunatai

viallisena olet alttiina näkyvälle

ja näkymättömälle lasersäteilylle.

Vältä säteen kohdistumista

suoraan itseesi. (f)

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are

no user serviceable parts inside the unit; leave all

servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation

when open and interlock failed or defeated. Avoid

direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL,

PLACED OUTSIDE THE UNIT.

Product specificaties

Merk:	JVC
Categorie:	CD-spelers/recorder
Model:	XL-PG300Y

Heb je hulp nodig?

Als je hulp nodig hebt met JVC XL-PG300Y stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding CD-spelers/recorder JVC

JVC XL-FP10B Handleiding

3 Augustus 2023

JVC RD-E661B-DAB Handleiding

20 Juni 2023

JVC RD-E221B Handleiding

18 Juni 2023

JVC RC-EZ31B Handleiding

10 Juni 2023

JVC XL-V130BK Handleiding

25 Mei 2023

JVC XL-FZ700BK Handleiding

6 Mei 2023

JVC CH-X500 Handleiding

2 Mei 2023

JVC CH-X1500 Handleiding

2 Mei 2023

JVC CH-X350 Handleiding

19 April 2023

JVC RC-EX16A Handleiding

14 April 2023

Handleiding CD-spelers/recorder

Nieuwste handleidingen voor CD-spelers/recorder

Marantz SA-17S1 Handleiding

15 November 2024

Klipsch PD-10AE Handleiding

13 November 2024

Rotel Michi Q5 Handleiding

3 November 2024

Reflexion PCD520MF Handleiding

29 September 2024

Auna Reference 802 Handleiding

24 September 2024

Advance X-CD1000 EVO Handleiding

11 September 2024

Shanling EC mini Handleiding

7 Augustus 2024

Shanling CD80 Handleiding

7 Augustus 2024

Shanling SCD1.3 Handleiding

7 Augustus 2024

Shanling ET3 Handleiding

7 Augustus 2024