JVC RK-C17D/ESP Handleiding

JVC Monitor RK-C17D/ESP

Lees hieronder de 📖 handleiding in het Nederlandse voor JVC RK-C17D/ESP (1 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 79 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Assembly Instructions
Rack Mount Adapter
RK-DTN21/ESP Assembly and Installation Instructions
Thank you for purchasing the Rack Mount Adapter. Please
carefully read these assembly and installation instructions
before begining assembly.
Safety Precautions
Please read and understand these safety precautions
before using this product.
Symbols
To highlight usage precautions and product depictions to assure safe
and correct product usage and to avoid danger or injury to persons
using this product or other persons, several symbols are used.
!Warning Improper handling in disregard of these notices
may result in body injury and even death.
Parts List
Monitor Securing
Screw x 4
1 x Rack Mount
Adapter Set including:
1 x Left Bracket
1 x Right Bracket
1. Attach the Left and Right mount adapters to the Rack Pilars.
Make sure that the Rack Rail on pilar has the proper gap with the
frontal plane to allow the right fit of the adapters. (See side view
below for details)
Front View
Screw
the bracktes
to rack
Pillar using
4 x M6* (not provided)
Side View
2. Screw the 4 screws into
the threaded holes located
on the flat sides of the
monitor. Do not thread
these to the end. Leave a
space so you can slide the
monitor in the grooved dies
on brackets.
Then tighten the screws to
the bottom and check the
correct fixing.
Make sure that the
Rack Rail on pilar has
the proper gap with
frontal plane of the
pilar in order that the
brackets can fit well .
Top View
Monitor
Left Bracket
Right Bracket
4 x Screws provided
Rack Pilar
Please contact the store where you purchased the
product if any parts are missing
!Caution Mishandling of the unit in disregard of these notices
may result in minor injury or damage to the unit
!Caution î‚ŸTo avoid injury to fingers,take care to not catch
your finger between the monitor and the part
when tightening the parts together.
Assembly/Installation Precautions
!Warning
î‚ŸAttaching this product to video monitors other than those
authorized may result in the monitor falling over or falling
down, potentially causing damage or bodily injury.
î‚ŸTo assure secure installation when attaching this product
to an EIA rack,separately provide appropiate screws or
bolts. Do not improperly attach, or use improper screws
or bolts. Doing so may result in the monitor or EIA rack
falling over or falling down, potentially causing damage or
bodily injurily.
î‚ŸAssemble all provided bolts,nuts and screw securely.
Failure to do so may result in the monitor falling over or
falling down, potentially causing damage or bodily injury.
î‚ŸDo not install in unstable locations such as uneven or
sloped surfaces or locations subject to vibration or shock.
Doing so may result in the monitor falling over or falling
down, potentially causing damage or bodily injury.
Tools required for assemby
Handtool: Sloted screwdriver
!Caution
î‚ŸTo avoid against bodily injury or damage, be sure that you have
sufficient working area before begining assembly
î‚ŸRemove Monitor stand prior to installing
and 4 insertable M6*
nuts (not provided)
*depending of the EIA rack
used


Product specificaties

Merk: JVC
Categorie: Monitor
Model: RK-C17D/ESP

Heb je hulp nodig?

Als je hulp nodig hebt met JVC RK-C17D/ESP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Monitor JVC

Handleiding Monitor

Nieuwste handleidingen voor Monitor