JVC RD-N1W Handleiding

JVC Ipod Audio RD-N1W

Lees hieronder de 📖 handleiding in het Nederlandse voor JVC RD-N1W (4 pagina's) in de categorie Ipod Audio. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

ID3 ON ID3 OFF

CAUTION: Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage,

locate the apparatus as follows:

Front: No obstructions and open spacing.

Sides/Top/Back: No obstructions should be placed in the

areas indicated by the dimensions in the illustration.

Bottom: Place on the level surface. Maintain an adequate air

path for ventilation by placing on a stand with a height of

10 cm or more.

ATTENTION: Aération correcte

Pour prévenir tout risque de décharge électrique ou d’incendie

et éviter toute détérioration, installez l’appareil de la manière

Avant: Bien dégagé de tout objet.

Flancs/ Dessus/ Arrière: Aucun obstacle ne doit être

placé dans les zones indiquées par les dimensions dans

l’illustration.

Dessous: Posez l’appareil sur une surface plane et

horizontale. Veillez à ce que sa ventilation correcte puisse

se faire en le plaçant sur un support d’au moins dix

centimètres de hauter.

Side view/Côté

Front view/Face

Microsoft and Windows Media are either registered

trademarks or trademarks of Microsoft Corporation in

the United States and/or other countries.

iPod is a trademark of Apple Inc., registered in the U.S.

and other countries.

“Made for iPod” means that an electronic accessory

has been designed to connect specifically to iPod and

has been certified by the developer to meet Apple

performance standards.

Apple is not responsible for the operation of this device

or its compliance with safety and regulatory standards.

•

ENGLISH

Thank you for purchasing a JVC product.

LVT2130-002B [J, C, B, US, A, UX]

0910TMMMDWMTS

SLEEP 10 SLEEP 20 SLEEP 30

SLEEP 90

OFF

HBS

ROCK POP CLASSIC

JAZZ

File Title

ArtistAlbum

Group

RD-N1

RD-N1W

For customer use:

Enter below the Model No. and Serial No. which are

located either on the rear, bottom or side of the cabinet.

Retain this information for future reference.

Model No.

Serial No.

For USA-California Only

This product contains a CR Coin Cell Lithium Battery

which contains Perchlorate Material—special handling

may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

Sound Mode

To select the sound mode suitable for your favorite

music.

Setting the clock

You can set the clock only when the System is turned

off (on standby.)

If you have already set the clock before, press and

hold CLOCK until the clock is flashing.

2 Adjust the hour and minute.

The clock may gain or lose 1 to 2 minutes per month.

You may need to readjust the clock periodically.

•

Compatible iPod models

iPod model Audio

iPod nano

iPod nano (2nd Generation)

iPod nano (3rd Generation)

iPod nano (4th Generation)

iPod nano (5th Generation)

iPod mini

iPod mini (2nd Generation)

iPod (4th Generation)

iPod classic

iPod photo (4th Generation)

iPod video (5th Generation)

iPod touch

iPod touch (2nd Generation and Fall ‘09)

If iPod does not play correctly, update iPod software to the

latest version.

For details about updating iPod, check on the Apple web

site <http://www.apple.com>.

Maintenance

To get the best performance of the System, keep your discs

and the mechanism clean.

Handling discs

Remove the disc from its case by holding it at the edge

while pressing the center hole lightly.

Do not touch the shiny surface of the disc, or bend the

disc.

Put the disc back in its case after use.

Be careful not to scratch the surface of the disc when

placing it back in its case.

Avoid exposure to direct sunlight, temperature extremes,

and moisture.

To clean the disc:

Wipe the disc with a soft cloth in a straight line from center

to edge.

Cleaning the System

Stains should be wiped off with a soft cloth. If the System

is heavily stained, wipe it with a cloth soaked in water-

diluted neutral detergent and wrung well, then wipe

clean with a dry cloth.

Since the System may deteriorate in quality, become

damaged or get its paint peeled off, be careful about the

following:

DO NOT wipe it hard.

DO NOT wipe it with thinner or benzine.

DO NOT apply any volatile substances such as

insecticides to it.

DO NOT allow any rubber or plastic to remain in contact

for a long time.

•

–

CD PORTABLE SYSTEM

Prepare the remote control

When you use the remote control for the first time, pull out the insulation sheet.

To replace the battery in the remote control

Supplied accessories

After unpacking, check to make sure that you have all

the following items:

Remote control (× 1)

Lithium coin battery CR2025 (× 1)

The battery has been installed in the remote

control when shipped from the factory.

FM antenna (× 1)

AC plug adaptor (× 1) (Not supplied for USA,

Canadian, European, Australian and Saudi Arabian

models.)

If anything is missing, consult your dealer immediately.

•

–

•

Notes on the power cord

When you go away for an extended period of time,

remove the plug from the wall outlet.

When unplugging the System from the wall outlet,

always pull the plug, not the power cord.

Do not handle the power cord with wet hands.

Disconnect the power cord before cleaning the System or

moving the System.

Do not alter, twist or pull the power cord, or put anything

heavy on it, which may cause fire, electric shock, or other

accidents.

Avoid moisture, water, dust, and high temperatures

Do not place the System in moist or dusty places.

If water gets inside the System, turn off the power and

remove the plug from the wall outlet, then consult your

dealer. Using the System in this state may cause a fire or

electrical shock.

Do not expose the System to direct sunlight or place it

near a heating device.

•

Lithium coin battery

(product number: CR2025)

NOTES:

Store the battery in a place where children cannot reach. If a child accidentally

swallows the battery, consult a doctor immediately.

To prevent the battery from overheating, cracking, or starting a fire:

Do not recharge, short, disassemble or heat the battery or dispose of it in a

fire.

Do not leave the battery with other metallic materials.

Wrap the battery with tape and insulate when throwing away or saving it.

Do not poke the battery with tweezers or similar tools.

Dispose of battery in the proper manner, according to federal, state, and local

regulations.

The battery (battery pack or battery installed) shall not be exposed to excessive

heat source such as sunshine, fire or the like.

CAUTION:

Danger of explosion if battery is incorrectly replaced. Replace only with the same

or equivalent type.

•

–

•

Getting started

For better FM reception

Disconnect the supplied FM antenna, and connect to an outdoor FM antenna (not supplied)

using a 75 Ω wire with coaxial type connector (IEC or DIN45325).

To a wall outlet

FM antenna (supplied): Extend it so that you can obtain the best reception.

NOTES:

Make sure the antenna conductors do not touch any other terminals, connecting cords

or the power cord. Also, keep the antennas away from metallic parts of the System,

connecting cords, and the AC power cord. Otherwise, it could cause poor reception.

•

Sound and other adjustments

Precautions Connections Do not connect the AC power cord until all other connections have been made.

In this manual...

The remote control buttons are used for explaining the

operations unless mentioned otherwise. However, if the

System has the same or similar button names, they can

also be used for the operations.

“File” and “track” are used interchangeably.

All the illustrations of the display used as examples are

from the European models.

•

Amplifier section

Output Power: 6 W (3 W + 3 W) at 3 Ω (10% THD)

Audio Input: AUDIO IN: Stereo mini (ø 3.5 mm)

250 mV/47 kΩ

Digital input: USB MEMORY

Tuner

FM tuning range: 87.50 MHz – 108.00 MHz

Disc player

Dynamic range: 80 dB

Wow and flutter: Immeasurable

USB

USB specification: Compatible with USB 2.0 Full Speed

Compatible device: Mass storage class

Compatible system: FAT16, FAT32

Output power: DC 5 V 500 mA

iPod

Output power: DC 5 V 500 mA

General

Speaker type: Bass-Reflex type

Speaker unit: 9 cm (3–9/16 inches) x 2

Speaker impedance: 3 Ω

Power requirements:

For USA and Canadian models AC 120 V / 60 Hz

For European models AC 230 V / 50 Hz

For Australian models AC 240 V / 50 Hz

For other models AC 110 V – 127 V / 220 V – 240 V

adjustable with voltage selector, 50/60 Hz

Power consumption: 35 W (at operation)

1.00 W or less (on standby)

Dimensions (approx.): 400 mm × 141 mm × 211 mm

(15–3/4 inches × 5–9/16 inches × 8–5/16 inches)

(W × H × D)

Mass (approx.): 3.3 k (7.3 lbs)g

Troubleshooting

If you are having a problem with your System, check this list for a possible solution before calling for service.

General

Power does not come on. \ Power plug is not inserted securely. Plug it in securely.

Adjustments or settings are suddenly

canceled before you finish.

\ There is a time limit. Start the procedure again.

Unable to operate the System from the

remote control.

\ The path between the remote control and the remote sensor on the

System is blocked.

\ The battery is exhausted.

No sound is heard. Headphones are connected.\

FM radio

Hard to listen to broadcasts because of

noise.

\ Antenna connection is incorrect or loose.

\ The FM antenna is not properly extended and positioned.

\ Electrostatic discharge from your body may cause noise. If this

happens, turn the System off then on again.

iPod

The iPod does not play, but “IPOD”

appears on the display.

\ The iPod battery is low or exhausted. Charge the iPod battery.

Disc/USB

The disc/USB mass storage class device

does not play.

\ The disc is placed upside down. Place the disc with the label side

facing up.

\ The disc is recorded using “packet writing (UDF file system).” It cannot

be played.

\ The USB mass storage class device is not connected properly.

“NO SONG” appears on the display. MP3/WMA files are not recorded on the disc or USB mass storage class \

device.

ID3 Tag on an MP3 file cannot be shown. There are two types of ID3 Tag—Version 1 and Version 2. This System \

can only show ID3 Tag Version 1.

Groups and tracks are not played back as

you expect.

\ Playing order is determined when the groups and tracks are recorded.

It depends on the writing application.

The disc/USB mass storage class device

sound is discontinuous.

\ The disc is scratched or dirty.

\ MP3/WMA files have not been properly recorded onto the USB mass

storage class device.

Sound from the USB mass storage class

device is interrupted.

\ Noise and static electricity may stop the sound. In this case, disconnect

and connect the USB mass storage class device again after turning off

the System.

The disc tray does not open or close. \ The AC power cord is not plugged in.

\ Disc ejection is prohibited. “DISC LOCKED” appears (see “Prohibiting

disc ejection” in “Disc/USB” on page 2).

Recording

Unable to record onto a USB mass

storage class device.

\ The capacity of the USB mass storage class device is full.

\ The USB mass storage class device is write-protected.

If the System does not work correctly, disconnect the AC power cord from the wall outlet, wait for a while, then

connect the cord again.

JVC bears no responsibility for any loss of data in USB mass storage class device or iPod while using this System.

•

Initial settings

Playable disc/file types

This System can play back...

Audio CD and CD-R/CD-RW in Audio CD format

MP3/WMA files on a CD-R/CD-RW (ISO 9660 format) or

USB mass storage class device (maximum data transfer

rate: 2 Mbps)

This System cannot play “packet write” discs.

For MP3/WMA playback...

Some MP3/WMA files may not be played back due to

their recording conditions.

This System can play only discs of ISO 9660 Level 1 or

Level 2.

It is recommended to record each file at a sampling rate

of 44.1 kHz and at a data transfer rate of 128 kbps.

This System can recognize a total of 999 tracks and 99

groups.

This System can show the Tag data (version 1).

For playback of files on a USB mass storage class device...

You cannot play back files larger than 2 GB.

This System may not play back some USB mass storage

class devices and does not support DRM (Digital Rights

Management).

•

–

•

–

•

–

To check the current time while the System is turned

The time is displayed for a few seconds.

If there is a power failure

The clock loses its settings. You need to set the clock

again.

(Hold)

Display settings

Display information

To display ID3/WMA tag information

During playback of MP3/WMA...

ID3/WMA tag information is displayed automatically

as follows:

Sleep Timer

You can set Sleep Timer only when the System is turned

on.

2 Specify the time.

To check the remaining time until the System shuts

off, press and hold .CLOCK

•

Timer

(Hold)

Sound adjustments

Fade muting

To drop the volume in a moment

To restore the volume, press again or adjust the

volume.

Hyper Bass Sound (HBS)

To reinforce the bass sound

•

(Europe only)

Notes on installation

Select a place which is level, dry and neither too hot nor

too cold—between 5˚C and 35˚C (41°F and 95 °F).

Do not install the System in a place subject to vibrations.

Do not put heavy objects on the System.

To prevent malfunction or damage to the System

Do not insert any metallic objects, such as wires, hairpins,

coins, etc. into the System.

Do not block the vents.

There are no user-serviceable parts inside. If anything

goes wrong, unplug the power cord and consult your

dealer.

•

Supplied accessories

See “Supplied accessories” in “Getting started.”

Design and specifications are subject to change without

notice.

Specifications

When you replace the battery, place the

edge of the battery under the wire loop.

•

Wire loop

(No indication)

Canceled

INSTRUCTIONS

Canceled

Mains (AC) Line Instruction (Asia and Saudi Arabia only)

CAUTION for mains (AC) line

BEFORE PLUGGING IN, do check that your mains (AC) line

voltage corresponds with the position of the voltage selector

switch provided on the outside of this equipment and, if

different, reset the voltage selector switch, to prevent from a

damage or risk of fire/electric shock.

If the wall outlet does not match the AC plug, use the supplied AC plug adaptor.

(Not supplied for USA, Canadian, European, Australian and Saudi Arabian models.)

PHONESAUDIO IN

SOURCE

STAN

DBY

VOLUME

B M EMORY

500mA

5V 500mA

ONESAUD

IO IN

SOU RC

TAN

DB Y

EJECT

VOL

UME

USB M EM OR Y

500mA

REPEAT1 REPEAT

RANDOM REPEAT GROUP

223

PHONES AUDIO IN

REMOTE CONTROL

HBS

VOLFADE MUTING

8 9

100

SOUND MODE

USB

EM ORY

5V 5 00m A

5V 500mA

MONO ST

REPEAT1 REPEAT

REPEAT GROUP

PS (NO PS*) PTY (NO PTY*) RT (NO RT*)

DISC LOCKED DISC UNLOCKED

NEWS INFO

The station search stops when a station of sufficient

signal strength is found.

To manually stop the search, press or .5 ∞

When you press 5 ∞ or repeatedly, the frequency

changes step by step.

•

Prohibiting disc ejection

You can lock the disc tray so that no one can eject the

loaded disc.

While the disc tray is closed...

When you lock the disc tray, “DISC LOCKED” is scrolled

on the display. “DISC UNLOCKED” is scrolled on the

display when you unlock it.

•

Program Play

1 Select a source and stop playback.

3 Select a track number (up to 32 tracks).

For audio CD:

For MP3/WMA:

(1) Select a group.

(2) Select a track.

To erase the entire program, press 7 repeatedly.•

Presetting stations

You can preset up to 20 FM stations.

While listening to a target station...

2 Select a preset number.

To select a number, see “How to select a number

using the remote control” in the bottom left of the

page.

Tuning in to a preset station

You can also use number buttons on the remote

control.

•

Receiving FM stations with Radio Data

System (Europe only)

Radio Data System allows FM stations to send an

additional signal along with their regular program

signals.

If you want to know more about Radio Data System,

visit <http://www.rds.org.uk>.

To display the Radio Data System information

Displayed if related signals are not sent by a station.

PS (Program

Service) Commonly known station names.

PTY (Program

Type) Types of broadcast programs.

RT (Radio Text) Text messages the station sends.

When a Radio Data System signal is not received, the

frequency is displayed.

Switching temporarily to a program of

your choice automatically (Europe only)

The Enhanced Other Networks function allows the

System to switch temporarily to a preset FM station

broadcasting a program of your choice (NEWS or INFO).

This function works while listening to the FM station

providing the required signals.

While listening to the FM station...

•

PTY search (Europe only)

You can search for a program from the preset stations by

specifying PTY code.

While listening to a station...

2 Select a PTY code.

3 Start searching.

When the System finds the one you have selected, that

station is tuned in.

To stop searching, press PTY SEARCH.

To search for another station, press PTY SEARCH while

the indications are flashing.

If no program is found, “NO FOUND” appears.

•

Dock adaptor (supplied

with the iPod or sold

separately)

iPod

Information shown on the display differs depending

on the type of the iPod.

To play back/pause iPod

Press 6.

To select a track

Press ¢ 4 or .

To fast-forward a track

Press and hold .¢

To fast-reverse a track:

Press and hold .4

To play back repeatedly

Press RPT/RND repeatedly.

To put iPod in sleep mode

Press and hold .6

Stereo mini plug cord

(not supplied)

Headphones (not supplied)

USB mass storage

class device

DO NOT turn off the System with the volume set to an extremely high level; otherwise,

the sudden blast of sound may damage your hearing, speakers, and headphones when you

turn on the System or start playback.

Notes on USB mass storage class device connection

Connect a USB mass storage class device when the

System is turned off to prevent malfunction.

Do not use a USB hub.

When connecting with a USB cable, use a USB 2.0

cable whose length is less than 1 m (39–3/8 inches).

The USB mass storage class device is charged through

the USB MEMORY terminal when “USB” is selected as

the source. (Some USB mass storage class devices may

not be charged through the USB MEMORY terminal

even if “USB” is selected as the source.)

You cannot connect a computer to the USB MEMORY

terminal of the System.

Electrostatic shock at connecting a USB mass storage

class device may cause abnormal playback of the

device. In this case, disconnect the USB mass storage

class device then reset the System and the USB mass

storage class device.

While playing back or recording a file onto a USB mass

storage class device, do not disconnect the device.

Doing so may cause malfunction on both the System

and the device.

•

Remote sensor

Notes on iPod connection

When detaching the dock adaptor from the dock,

pull up the dock adaptor with your fingernail or sharp

pointed tool using the slot.

Be careful not to injure your fingertips

or damage the terminal of the direct

dock.

DO NOT connect or disconnect the iPod when the

System is turned on.

Be sure to reduce the volume on the System to the

minimum level before connecting iPod. Adjust the

volume after starting playback.

You cannot send any data to the iPod from the System.

Do not carry the System with iPod connected. It might

cause damage to the dock or you might drop the iPod.

Do not touch or hit the iPod terminal pins or connector

pins in the iPod dock directly. Doing so might cause

damage to the connector pins.

iPod is charged through the dock when the System is

turned on.

•

iPod

Adjust the volume.

Turn on the power.

Select a source.

Basic operation

Playback operations

Searching for stations

Improving the reception

When an FM stereo broadcast is hard to listen...

When the monaural mode (MONO) is activated, the

reception is improved. However, the stereo effect is lost.

When the stereo mode (ST) is activated, you can listen

to the radio in stereo when a program is broadcast in

stereo.

•

To open the disc tray

Press .0

To play back/pause a disc or USB mass storage class

device

Press .6

To select a track

Press or .¢ 4

To fast-forward a track

Press and hold .¢

To fast-reverse a track

Press and hold .4

To select a group (MP3/WMA only)

Press or .5 ∞

To stop playback

Press . 7

Playback operations

FM radio

iPod

Disc/USB

External

device

Playback operation

Stereo mini plug cord

(not supplied)

Be sure to turn down

the volume before

connecting or putting

on the headphones.

STANDBY lamp

Frequency

(No-radio Data System signal)

(hold for 5 seconds

at the same time)

Repeat Play

During playback...

REPEAT 1 Repeats the current track.

REPEAT Repeats all tracks.

REPEAT GROUP Repeats all tracks in the current group

(MP3/WMA only).

Random Play

1 Select a source and stop playback.

Playback starts in a random order.

Random Play ends when all tracks have been played.

You cannot select a track with the number buttons

during Random Play.

•

(Hold)

How to select a number

using the remote control

Examples:

To select number 5, press 5.

To select number 20, press 10, 2, then

0 (when “- -” appears), or press 10, 0, 2,

then 0 (when “- - -” appears).

To select number 125, press 10, 1, 2,

then 5.

(MP3/WMA only)

Before you start recording

• It should be noted that it may be unlawful to

re-record pre-recorded tapes, records, or discs

without the consent of the owner of copyright for

the sound or video recording, broadcast or cable

program and for any literary, dramatic, musical, or

artistic work embodied therein.

The use of the files recorded on a USB device with

this System, except for personal use, is prohibited.

Transferring or selling the files you recorded

violates the copyright law and may subject you

to civil and criminal penalties for copyright

infringement.

• The volume and sound adjustments (see page 1) do

not affect recordings.

• Random Play and Repeat Mode are canceled during

recording.

• Tracks which are recorded onto a USB mass storage

class device will be converted into MP3 format (at a

sampling rate of 44.1 kHz and bit rate of 128 kbps.)

Recording from a Disc

You can record tracks from an Audio CD to a USB mass

storage class device.

Before recording...

Connect a recordable USB mass storage class device to

the USB MEMORY ( ) terminal.

1 Select CD as a source and stop playback.

2 Start recording.

Recording operations

(twice)

(Hold)

Label side

• Do not vibrate the System while recording tracks. It

may damage the recorded tracks.

The System will automatically create the new group

as “CDREC01.”

When playback ends, recording automatically stops.

To stop recording manually, press 7.

To record a single track, press RECORD twice during

playback of that track.

To record programmed tracks, press RECORD twice

while Program Play is stopped.

Erasing a track

You can erase tracks on the USB mass storage class

device.

• Once the track is erased, you cannot resume it.

Before erasing...

Connect a USB mass storage class device to the USB

MEMORY ( ) terminal.

1 Select USB as a source and start playback.

2 Select a track you want to erase.

3 Erase the track.

•

(twice)

Preset number

2 Start playback of the external device.

(No indication)

(Other models)

(RM-SRDN1A)

(European model)

(RM-SRDN1R/RM-SRDN1WR)

(Other models)(European model)

Canceled

(No indication)

Canceled

(MP3/WMA only)

(On the main unit)

and

Canceled

(No indication)

Product specificaties

Merk:	JVC
Categorie:	Ipod Audio
Model:	RD-N1W
Kleur van het product:	Wit
Gewicht:	3300 g
Stroomvoorziening:	120V, 60Hz
Beeldscherm:	LCD
Ondersteund audioformaat:	MP3, WMA
Aantal USB 2.0-poorten:	1
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	6 W
Audio-ingangen:	1
Compatibele producten:	iPod
ID3 Tag weergave:	Ja
D/A-converter:	1-bit
Ondersteunde frequentiebanden:	FM
Aantal voorkeurszenders:	20
Afmetingen (B x D x H):	400 x 211 x 141 mm
CD-R afspelen:	Ja
CD-RW afspelen:	Ja
Afstandsbediening inbegrepen:	Ja
Digital tuner:	Ja
Slaaptimer:	Ja