JVC LT-19A1 Handleiding

JVC Televisie LT-19A1

Lees hieronder de 📖 handleiding in het Nederlandse voor JVC LT-19A1 (1 pagina's) in de categorie Televisie. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Safety Precautions
Care when setting
RM-C2020
LCD
DISP LAY
CHANNEL
VOL UME
MODE
BACK
ZO O M
E CO
ME N UTV / V I D E O
RE T U RN+
Cl ear SD
1 32
4 65
7 98
0
OK
9
CH
VOL
CH
VOL
Auto
16:9 Zoom
16:9 Zoom Subtitle
Full
Regular
14:9 Zoom
Zoom
Regular
Zoom : Change the aspect ratio
OK
OK
OK
OKOK
1. Select
2. Set
16:9 Zoom
Picture
Pictu re Mode
Sh arpnes s
Colo ur
Tint
White Balan ce
Fea tures
Ba cklight
Brigh tness
Con trast
Sof t
Warm
- %. 5
ภาษาไทย
Set Up
La ngua ge
English
Castellano
Melayu
ไทย
Portugues
Français
Укpaїнc aьк P ccу кий
Set Up
Grou p-5
Grou p-2
Grou p-4
Grou p-3
Grou p-1
Tele text La ngua ge
Set Up
Aut o Progra m
5 %
CH 40
OK
OK
OK
OKOK
Set Up
Edit
PR ID
01 CH / CC
05
07
08
10
09
CH 2 8
CH 3 2
CH 0 3
CH 1 2
06
02
03 B BCAB C CH 4 7
CH 0 9
CH 0 2
CH 0 5
CH 1 1
CH 0 7
04 A BCDEF
OK
OK
OK
OKOK
OK
OK
OK
OKOK
OK
OK
OK
OKOK
Adjust Volume
HDMI
PC IN
(D- SUB)
Pb
Pr
L
R
L
R
V
PC/HDMI
(ANALOG AUDIO)
Y
V
/
VIDEO-2 VIDEO-1
PC
Y/VY/V
Pb L
RPr
Pb L
RPr
VIDEO-2 VIDEO-2
OK
OK
OK
OKOK
Set Up
Are a - 2
Are a - 1
Coun try Area
- %. 5
M EN U
1
Set Up
Channel Summary
CH/CC ID
CH 0 2 Skip
CH 0 6
CH 0 8
CH 0 9
CH 1 1
CH 1 0
CH 0 7
CH 0 3
CH 04 BBCABC Yes
Ye s
Ye s
Ye s
Ye s
Ye s
CH 0 5 ABCDE F
Ye s
Ye s
Ye s
Ye s
Set Up
Aut o Progra m
5 %
CH 40
Set Up
Cab le
Air
Au to Prog ram
OK
OK
OK
OKOK
4 6 6 ) $% /
4 PC
1 Video - 1
3 HDMI
2 Video - 2
AV Select
0 01
OK
OK
OK
OKOK
1. Select
2. Set
Thank you for buying this JVC LCD panel television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
• Follow this manual regarding setup!
- Connect only to a 110-240 V, 50/60Hz AC outlet.
• Make enough room for inserting and removing the power
plug!
• Place the TV as close to the outlet as possible!
- The main power supply for this TV is controlled by inserting or removing
the power plug.
• Never cut or damage the power cord!
- If the AC plug is not the right shape, or the power cord is not long
enough, use an appropriate plug adapter or extension
cable. (Consult your retailer)
• Unplug the power cord when going out!
- The power buttons on the remote control and the TV unit
cannot completely turn off the TV. (Make appropriate
arrangements for bedridden people.)
• Do not allow the TV to fall!
- Do not rest your elbows on, or allow children to hang from the TV.
- There is a risk that the TV will fall and cause injuries.
- Make use of the hole on the back of the stand to prevent the TV from
falling easily.
• If the TV is damaged or behaving strangely, stop using it at
once!
- Unplug the power cord and contact your retailer.
• Never place anything on the TV!
- Placing liquid, naked ames, cloths, paper, etc.
on the TV may cause a re.
• Never expose to rain or moisture!
- To prevent re or electric shock, never allow
liquids to enter the unit.
• Never insert objects into the cabinet
openings!
- It many cause a fatal electric shock.
- Take care when children are near.
For more details on installation, usage and safety Consult your
retailer.
• Hold the TV so as not to scratch the screen!
- Do not touch the screen when carrying the TV.
• Never dismantle the rear panel!
- It many cause an electric shock.
• Never obstruct the ventilation holes!
- It may cause overheating or a re.
• Handle LCD panel with care!
- Use a soft, dry cloth when cleaning.
• Never try repair the TV yourself!
- If the problem cannot be solved in “Troubleshooting” unplug the power
cord and contact your retailer.
• If a television is not positioned in a suf ciently stable
location, it can be potentially hazardous due to falling. Many
injuries, particularly to children, can be avoided by talking
simple precautions such as:
- Using cabinets or stands recommended by the manufacturer of the
television.
- Only using furniture that can safely support the television.
- Ensuring the television is not overhanging the edge of the supporting
furniture.
- Not placing the television on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and the television to a
suitable support.
- Not standing the television on cloth or other materials placed between
the television and supporting furniture.
- Educating children about the dangers of climbing on furniture to reach
the television or its controls.
9 Power requirements
Connect the power cord only to a 110-240V,
50/60Hz AC outlet.
9 Installation requirements
To avoid overheating, ensure the unit has ample
room.
To prevent the TV from falling thread the belt
through the hole on the back of the stand and
secure it to the TV rack.
Hole for belt
Belt
(not provided)
Screw (not provided)
GGT0335-001A-H
0310SCT-NF-MT
© 2010 Victor Company of Japan, Limited
WIDE LCD PANEL TV INSTRUCTIONS
LT-19A1
ENGLISH
200 mm
50 mm150 mm 150 mm 50 mm
1 Power On / Off
2 Colour buttons
3 Turn on “Clear SD”
4 Turn on “Zoom
5 Turn on “Eco Mode”
6 To Teletext
7 Display on-screen menu
8 Operate the menu
9 To previous screen
! Volume control / Turn off muting
" View the Teletext
# Change channel / Page / Hyper Scan
$ Channel information
% Switch between TV / Video input
& Return Plus / Return function
( Turn the volume off / on
) Change channel / page
1 2 / Select Main menu.
(Picture / Sound / Features / Set Up)
3 4 / Select sub menu.
1 2 / Change setting.
When is shown.2
Display function setting.2
/ 3 4 Select function.
/ Change setting.1 2
- %. 5
or
4 6 6 ) $% /
Exit from Menu.
OK
OK
OK
OKOK
Con rm after setting.
• Please see “Menu operation guide” at the bottom of menu on-screen.
1
JVC logo appears
2 Select a language.
4. Select the teletext language group.
5. Automatically register channels (Auto Program).
6. Check what was registered.
If you want to edit channel, follow Edit
function in Set Up menu.
1. Select
2. Set
1. Select
Hyper Scan :
Press and hold
#(!..%,
. PR changes without changing the picture screen.
Once you release the button, the picture of the selected PR will appear.
Return Plus : Return to the frequently viewed channel.
Return Plus Programmed by select the frequently viewed channel then press and hold
RETURN+
.
Return Plus Canceled by press and hold
RETURN+
.
Return : Return to the previously viewed channel.
Move the picture with or 3 4
while this bar is displayed.
When 720p or 1080i or 1080p
signal is received, “Full” and
“Slim” can be selected.
• In PC mode, “Regular” and
“Full” can be selected.
• Insert the batteries
Use two “AAA/R03” dry cell batteries.
Insert the batteries from the end, ·
making sure the and polarities are · ª
correct.
“AAA/R03”
Batteries WARNING:
Batteries shall not be exposed
to excessive heat such as direct
sunshine, re or the like.
If this symbol is shown,
it is only valid in the
European Union.
Remote control buttons and functions
Initial Settings
Display MENU.
Set Up and connections
Component input Composite input
DVD Player
Game Video
VCR
HDMI Analog /
DVI Analog / PC Audio
Video cameraGame consoles
VCR (DVD player)
DVD player
(HDMI compatible)
VCR
(DVD Player)
PC
AERIAL
To VIDEO-1
To VIDEO-1
3 Select Country Area.
The power on the unit can also be used.
Area-1 : Asia, Middle East, Europe, Oceania, Africa
Area-2 : South America, Philippines
1. Select
2. Set
The select the new Country Area after Initial Setting has completed.
(While the cursor is pointing to Picture
menu and hold for 3 seconds.)
If you select Country Area to “Area-1 If you select Country Area to “Area-2
Using the TV’s Menu ---> Area - 1
4. Select Air or Cable.
5. Searching for the channels (Auto Program)
6. Check what was registered.
If you want to set undesired channels
to be skiped, follow Channel Summary
function in Set Up menu.
1. Select
2. Set
Picture
Picture Mode
Backlight
Contrast
Brightness
Sharpness
Colour
Tint
White Balance
Select the picture as you like.
(Standard / Soft / Bright)
Darker <--> Brighter
Lower < --> Higher
Darker <--> Brighter
Softer < --> Sharper
Lighter <--> Deeper
Reddish <-- > Greenish *Only NTSC
Select the white balance of the picture.
(Cool / Mid / Warm)
Features Clear SD For clearly picture
(Off / Mode-1 / Mode-2)
Colour
Management
For natural - looking pictures.
(Off / On)
Picture
Management
Fix bright / dark pictures.
(Off / On)
Colour
System
Select an appropriate Colour system.
(Auto / PAL / SECAM / NTSC3.58 /
NTSC 4.43 / PAL-M / PAL-N)
Zoom Change the aspect ratio.
(Auto / Regular / 14:9 Zoom / 16:9 Zoom
/ 16:9 Zoom Subtitle / Full)
Sound
Stereo / I9II Select the stereo, mono or bilingual language.
( / / O / / Mono )I II m
Bass Weaker <--> Stronger
Treble Weaker <--> Stronger
Surround Ambient sound (Off / On)
Balance Left Stronger <--> Right Stronger
Al Volume Prevent sudden increase or decrease of sound.
(Off / On)
Features
On Timer Turns on the TV from standby mode.
PR Select a channel. ( 01 - 99 )
On Timer Set a time. ( 00:00 - 12:00 )
Sleep Timer Turns off the TV to standby mode.
(Off / 10 / 20 / ...120)
Blue Back Display a blue screen and mute the sound when the
signal is weak or absent. (Off / On)
Eco Mode Adjust picture contrast to match your room brightness.
(Off / Eco-1 / Eco-2)
Set Up
Auto Program
Edit / Manual
Automatically registers channels.
Move Move a channel position by 2
and Adjust by 3 4 / .
ID Edit a channel name by
(Red)
.
Insert Insert a channel by
(Green)
.
Select a CH/CC by / .3 4
Enter number by 0-9 buttons.
Delete Delete a channel by
(Yellow)
.
Manual Register a new channel by
(Blue)
.
Beginning channel search by
(Red)
and
(Green)
.
Channel ne tunning by
(Yellow)
and
(Blue)
.
If the picture or sound is unnatural by
for select a system.
Language Select your desired on screen display language.
Video-2 Setting
Switch between video and component signal.
(Video / Component)
Teletext
Language
Select Teletext language group.
(Group-1/ Group-2/ Group-3/ Group-4/ Group-5)
HDMI Setting Setting for HDMI input. (Size / Audio)
PC Setting Setting for PC input.
(Auto / PC Position / Phase / Pixel)
OR
VIDEO-2
VIDEO-1
V-Scroll
Troubleshooting
Severe noise or snow
Check the aerial cable and TV connections .
Check the direction of the aerial.
Check the aerial or its cable damaged or not.
Patterns, stripes or noise
Interference caused by devices such as an ampli er, personal computer,
or a hair drier, Move it away from TV.
Ghosting (Doubling of images)
Interference occurs caused by signal re ection from mountains or building.
Try to adjust the aerial’s direction or use another antenna.
Cannot turn it on
Ensure the power cord is connected to the AC outlet correctly.
Cannot operate the remote control.
The batteries may be exhausted. Replace with new batteries.
Ensure that you are operation the remote control at less than 7 meters
from the front of your TV.
Remote control stops working
Unplug TV, several minutes later plug it in again.
Aspect ratio changed unintentionally
Press “
ZOOM
” button to return to your settings.
PC screen alignment is off
Adjust the “PC Position” in “PC Setting” of Set Up menu.
Blue screen appears on the screen
Switch “Blue Back” to “Off”.
Strange picture when using an external device
If the top of the image is distorted, check the video signal quality itself.
If movement appears unnatural when receiving a signal from a DVD
player, etc. with 625p (progressive-scanning), change the output setting of
the external device to 625i (interlace-scanning).
Viewing Teletext
Language group for Teletext
Group Languages
Group-1
Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese,
Greek, Swedish, Finnish
Group-2
Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian, German,
French
Group-3
Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian, Serbian,
Croatian, Slovenian, Czech, Slovak, English, German
Group-4
Arabic, Hungarian, English, German, French, Italian, Spanish, Portuguese,
Swedish, Finnish
Group-5
Farsi, Hungarian, English, German, French, Italian, Swedish, Finnish
If the characters are unreadable. Select different Teletext language group.
You can watch the Teletext broadcast channel with Text Functions.
1 TV mode <--> TEXT mode
2 Select a Teletext page by press number button (0-9).
• Move up or down a page by CHANNEL +/-.
List Mode
:Book mark your favourite page.
MODE
2ED 'REEN 9ELLOW "LUE
for select to save
Press number button
for enter the number
of page.
save
• Recall your favourite page by press the colour button.
Hold
:Hold the current page.
• Cancel by press this button again.
Reveal
:Display hidden information.
example : answer to a quiz, etc
Size
:Double the size of the displayed text.
Index
:Returns to page “100” or a previously designated page.
Cancel
:Leave the current page open, while you switch to watch
TV.
• Useful when running a page search.
Sub-page
:Display the number of Sub-page.
• Cancel by press this button again.
Terminals / ConnectorsMain unit
Broadcasting systems B / G / I / D / K / M / N
Colour systems PAL / SECAM / NTSC 3.58 MHz / NTSC 4.43 MHz
/ PAL-M / PAL-N
Channels and
frequencies
Area-1
VHF low channel (VL) = 46.25 to 140.25 MHz
VHF high channel (VH) = 147.25 to 423.25 MHz
UHF channel (U) = 431.25 to 863.25 MHz
Area-2
VHF low channel (VL) = 55.25 to 127.25 MHz
VHF high channel (VH) = 133.25 to 361.25 MHz
UHF channel (U) = 367.25 to 801.25 MHz
Receives cable channels in mid band (X to Z+2, S1 to S10),
super band (S11 to S20) and hyper band (S21 to S41)
Sound-multiplex
systems
NICAM ( I / B / G / D / K ), A2 (B / G / D / K)
MTS (Multi-channel Television Sound)
Teletext systems
FLOF (Fastext), WST (World System Teletext)
Power requirements
AC 110 V - 240 V, 50/60Hz
Audio output
(Rated power output) 3 W + 3 W
Speakers (3.5 cm x 5.5 cm ) x 2
Power consumption
[standby]
32 W
[0.5 W]
Screen size
(visible area size
measured diagonally)
47 cm
Dimensions
(W x H x D: mm)
[without stand]
475 x 356.8 x 181.3
[475 x 311.8 x 59.5]
Weights
[without stand]
4 kg
[3.5 kg]
Accessories
Power cord x 1
Remote control unit : RM-C2020 x 1
AAA/R03 dry cell battery x 2
Screw x 1
Speci cation
What is “Clear SD”
LCD picture is unstable due to a large number of signal noise. Such noise
appears extensively especially when an LCD displays SD signals. Clear SD
mode resolves disadvantage for better picture quality.
Connect a “DVI” device to “HDMI” using “DVI-HDMI” conversion cable.
Connect analogue sound output of the DVI device to L and R terminals in
INPUT VIDEO-2.
Set “Audio” in “HDMI Setting” to “Analogue” or “Auto”.
Technical information
Watching Video or DVDs
Sound and Colour system in your country or region
Area Country or Region
System System
Asia,
Middle
East
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, Indonesia, Malaysia, Singapore,
Thailand, India, etc.
B/G
PAL
China, Vietnam, etc. D/K
Hong Kong, etc. I
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G SECAM
Philippines, Taiwan, Myanmar, etc. M NTSC
Europe
Russia, etc. D/K SECAM
Czech Republic, Poland, etc.
PALGermany, Holland, Belgium, etc. B/G
UK, etc. I
Oceania
Australia, New Zealand, etc. B/G PAL
Africa
Republic of South Africa, etc. I PAL
Nigeria, etc. B/G
Egypt, Morocco, etc. SECAM
South
America
Agentina, Paraguay, Uruguay
NPAL
Brazil
M
Chile, Peru, Bolivia, Colombia, Venezuela,
Ecuador, etc.
M NTSC
1 Select the input source.
• HDMI Analogue / DVI Analogue / PC Audio use terminal common with
VIDEO-2.
• We may change the design and speci cations without notice.
• HDMI, the HDMI Logo and High-De nition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Terminal name Terminal type Signal type (IN)
Input
terminals
VIDEO-1
RCA connectors x 3
Composite video, Audio L/R
VIDEO-2
RCA connectors x 5
Composite video, Analogue
component 480i (525i) / 576i (625i),
Progressive : 480p (525p) / 576p
(625p),
HD : 720p (750p) / 1080i (1125i) /
1080p (1125p)
Audio L/R
HDMI
HDMI connector x 1
HDMI 480i (525i) / 480p (525p) /
576i (625i) / 576p (625p) / 720p
(750p) / 1080i (1125i) / 1080p
(1125p)
PC INPUT
D-SUB (15 pins) x 1
Analogue PC signal
HDMI Analogue/
DVI Analogue/
PC Audio
RCA connectors x 2
Audio L / R
• Operate the connected device and play video.
2 Select “Set Up” Menu.
: Setting for HDMI input.HDMI setting
Size : Auto / 1 / 2
If wrong screen size appears in 480p (525p),
change to “1” or “2”
Audio : Auto / Analogue / Digital
If no sound, change to “ Analogue “ or “ Digital”
PC Setting : Setting for PC input.
Auto : Automatic adjust by .2
PC Position : Adjust screen position by / .3 4
And set by
OK
OK
OK
OKOK
.
Phase : Sets the focus of screen.
Pixel : Adjusts the horizontal feature of screen.
Poor picture quality
Unnatural colour >> Adjust “Colour” and “Backlight”.
Check “Colour System”. If “Auto” is selected.
Select the speci c colour system manually.
Noise >> Set to the following functions.
Picture Mode : Standard
Dull picture >> Set to the following functions.
Picture Mode : Bright
Poor sound
Adjust the “Bass” and “Treble”.
If receiving a poor signal in “Stereo/III” switch to “Mono”.
Adjust the channel reception using “Manual”.
For HDMI signal, wrong screen size.
Switch “Size” in “HDMI Setting” to “1” or “2”.
For HDMI signal, green and distorted screen
Wait a little for the signal to stabilize when switching the signal format for
an “HDMIdevice.
For HDMI signal, No picture / No sound
Use the cable marked with HDMI logo.
Check if the device is compliant with HDMI.
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for HDMI devices, or
“Analogue” or “Auto” for DVI devices.
Some functions do not work.
It is not a malfunction. Some functions (dark background) in the menu do
not work depending on the situation.
Black or white dots appear on the screen.
LCD panels use ne dots (“pixels”) to display images. While more than
99.99% of these pixels function properly, a very small number of pixels
may not light, or may light all the time. It is not a malfunction.
No picture, No sound
Some input do not output from OUT terminal.
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.
Connect “DVI” devices
CH / CCUsing the TV’s Menu ---> Area - 2
Picture
Picture Mode
Backlight
Picture
Brightness
Detail
Color
Tint
White Balance
Select the picture as you like.
(Standard / Soft / Bright)
Darker < --> Brighter
Lower <--
> Higher
Darker <
-- > Brighter
Softer <--
> Sharper
Lighter <
-- > Deeper
Reddish <--> Greenish *Only NTSC
Select the white balance of the picture.
(Cool / Mid / Warm)
Features Clear SD For clearly picture
(Off / Mode-1 / Mode-2)
Color
Management
For natural - looking pictures.
(Off / On)
Picture
Management
Fix bright / dark pictures.
(Off / On)
Color
System
Select an appropriate Color system.
(Auto / PAL / SECAM / NTSC3.58 /
NTSC 4.43 / PAL-M / PAL-N)
Zoom Change the aspect ratio.
(Auto / Regular / 14:9 Zoom / 16:9 Zoom
/ 16:9 Zoom Subtitle / Full)
Sound
MTS Select the stereo and SAP broadcasted programs.
(Stereo / SAP / Mono)
Bass Weaker <--> Stronger
Treble Weaker <--> Stronger
Surround Ambient sound (Off / On)
Balance Left Stronger <--> Right Stronger
Al Volume Prevent sudden increase or decrease of sound.
(Off / On)
Features
On Timer Turns on the TV from standby mode.
CH Select a channel. ( 02 - 69 )
On Timer Set a time. ( 00:00 - 12:00 )
Sleep Timer Turns off the TV to standby mode.
(Off / 10 / 20 / ...120)
Blue Back Display a blue screen and mute the sound when the
signal is weak or absent. (Off / On)
Eco Mode Adjust picture contrast to match your room brightness.
(Off / Eco-1 / Eco-2)
Set Up
Auto Program
Channel
Summary
Automatically registers channels.
Skip Skip the channel by
(Red)
.
Cancel Cancel the skip channel by
(Green)
.
ID Edit a channel name by
(Yellow)
.
Channels are to be skipped cannot be selected by
the CHANNEL - / + button.
The skip can be set to all channels of Air (CH02 - CH69)
and Cable (CC01 - CC125).
Language Select your desired on screen display language.
Video-2 Setting
Switch between video and component signal.
(Video / Component)
Closed Caption
Select the desired caption or text channel.
Closed
Caption
Select to view close caption or text
information. (Off / CC / Text)
Caption Select the desired caption.
(CC1 / CC2 / CC3 / CC4)
Text Select the desired text channel.
(T1 / T2 / T3 / T4)
Closed Caption is not available for component
signal.
HDMI Setting Setting for HDMI input. (Size / Audio)
PC Setting Setting for PC input.
(Auto / PC Position / Phase / Pixel)
CC 24 K S-24
CC 25 L S-25
CC 26 M S-26
CC 27 N S-27
CC 28 O S-28
CC 29 P S-29
CC 30 Q S-30
CC 31 R S-31
CC 32 S S-32
CC 33 T S-33
CC 34 U S-34
CC 35 V S-35
CC 36 W S-36
CC 37 W+ 1 S-37
CC 38 W+ 2 S-38
CC 39 W+ 3 S-39
CC 40 W+ 4 S-40
CC 41 W+ 5 S-41
CC 42 W+ 6
CC 43 W+ 7
CC 44 W+ 8
CC 45 W+ 9
CC 46 W+ 10
CC 47 W+ 11
CC 48 W+ 12
CC 49 W+ 13
CC 50 W+ 14
CC 51 W+ 15
CC 52 W+ 16
CC 53 W+ 17
CC 54 W+ 18
CC 55 W+ 19
CC 56 W+ 20
CC 57 W+ 21
CC 58 W+ 22
CC 59 W+ 23
CC 60 W+ 24
CC 61 W+ 25
CC 62 W+ 26
CC 63 W+ 27
CC 64 W+ 28
CC 75 X
CC 76 Y R3
CC 77 Z R4 AU-3
CC 78 Z+1 R5
CC 79 Z+2 AU-4
CC 95 A -5
CC 96 A -4
CC 97 A -3
CC 98 A -2
CC 99 A -1
CH 48 US -48, W+63 E48
CH 49 US -49, W+64 E49
CH 50 US -50, W+65 E50
CH 51 US -51, W+66 E51
CH 52 US -52, W+67 E52
CH 53 US -53, W+68 E53
CH 54 US -54, W+69 E54
CH 55 US -55, W+70 E55
CH 56 US -56, W+71 E56
CH 57 US -57, W+72 E57
CH 58 US -58, W+73 E58
CH 59 US -59, W+74 E59
CH 60 US -60, W+75 E60
CH 61 US -61, W+76 E61
CH 62 US -62, W+77 E62
CH 63 US -63, W+78 E63
CH 64 US -64, W+79 E64
CH 65 US -65, W+80 E65
CH 66 US -66, W+81 E66
CH 67 US -67, W+82 E67
CH 68 US -68, W+83 E68
CH 69 US -69, W+84 E69
CC Channel
US CCIR OIRT AUSTRALIA
CC 01 S-1 AU-5
CC 02 S-2
CC 03 S-3
CC 04 S-4
CC 05 S-5
CC 06 S-6 AU-5A
CC 07 S-7
CC 08 S-8
CC 09 S-9
CC 10 S-10
CC 11 S-11
CC 12 S-12
CC 13 S-13
CC 14 A S-14
CC 15 B S-15
CC 16 C S-16
CC 17 D S-17
CC 18 E S-18
CC 19 F S-19
CC 20 G S-20
CC 21 H S-21
CC 22 I S-22
CC 23 J S-23
CH Channel
US CCIR OIRT AUSTRALIA
CH 02 US -02 E2 R1 AU-0
CH 03 US -03 E3 AU-1
CH 04 US -04 E4 R2 AU-2
CH 05 US -05 E5 R6 AU-6
CH 06 US -06 E6 R7 AU-7
CH 07 US -07 E7 R8 AU-8
CH 08 US -08 E8 R9 AU-9
CH 09 US -09 E9
CH 10 US -10 E10 R10 AU-10
CH 11 US -11 E11 R11 AU-11
CH 12 US -12 E12 R12
CH 13 US -13
CH 14 US -14, W+29
CH 15 US -15, W+30
CH 16 US -16, W+31
CH 17 US -17, W+32
CH 18 US -18, W+33
CH 19 US -19, W+34
CH 20 US -20, W+35
CH 21 US -21, W+36 E21
CH 22 US -22, W+37 E22
CH 23 US -23, W+38 E23
CH 24 US -24, W+39 E24
CH 25 US -25, W+40 E25
CH 26 US -26, W+41 E26
CH 27 US -27, W+42 E27
CH 28 US -28, W+43 E28
CH 29 US -29, W+44 E29
CH 30 US -30, W+45 E30
CH 31 US -31, W+46 E31
CH 32 US -32, W+47 E32
CH 33 US -33, W+48 E33
CH 34 US -34, W+49 E34
CH 35 US -35, W+50 E35
CH 36 US -36, W+51 E36
CH 37 US -37, W+52 E37
CH 38 US -38, W+53 E38
CH 39 US -39, W+54 E39
CH 40 US -40, W+55 E40
CH 41 US -41, W+56 E41
CH 42 US -42, W+57 E42
CH 43 US -43, W+58 E43
CH 44 US -44, W+59 E44
CH 45 US -45, W+60 E45
CH 46 US -46, W+61 E46
CH 47 US -47, W+62 E47
US : The United States, Philippines, etc.
CCIR : The Middle East, Southeast Asia, etc.
OIRT : Eastern Europe, Russia, Vietnam, etc.
AUSTRALIA : Australia, etc.
PC Signals that can be displayed
If the signal doesn’t appear, check that the vertical frequency on the PC is
set to “60Hz”.
Resolution 640 x 480 (VGA) / 1024 x 768 (XGA)
Vertical frequency 60.0
* Machintosh* computers are not supported.
(Machintosh is a registered trademark of Apple Computer, Inc.)
123
654
No use “Clear SD” Use “Clear SD”
(continued)
GGT0335-001A-H_EN.indd 1
GGT0335-001A-H_EN.indd 1
GGT0335-001A-H_EN.indd 1
GGT0335-001A-H_EN.indd 1GGT0335-001A-H_EN.indd 1 3/2/10 12:14:05 PM
3/2/10 12:14:05 PM
3/2/10 12:14:05 PM
3/2/10 12:14:05 PM3/2/10 12:14:05 PM
Downloaded from manuals search enginewww.Manualslib.com


Product specificaties

Merk: JVC
Categorie: Televisie
Model: LT-19A1

Heb je hulp nodig?

Als je hulp nodig hebt met JVC LT-19A1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Televisie JVC

Handleiding Televisie

Nieuwste handleidingen voor Televisie