JVC KD-R207EE Handleiding

JVC Autoradio KD-R207EE

Lees hieronder de 📖 handleiding in het Nederlandse voor JVC KD-R207EE (5 pagina's) in de categorie Autoradio. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

1– EN

ENGLISH

[European Union only]

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified CAUTION:

service personnel.

3. Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments.CAUTION:

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

KD-R207

CD RECEIVER: INSTRUCTIONS/INSTALLATION

0808DTSMDTJEIN

Warning

If you need to operate the unit while driving, be sure to

look around carefully or you may be involved in a traffic

accident.

Caution on volume setting

Discs produce very little noise compared with other sources.

Lower the volume before playing a disc to avoid damaging

the speakers by the sudden increase of the output level.

For safety...

• Do not raise the volume level too much, as this will block

outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold

weather, wait until the temperature in the car becomes

normal before operating the unit.

Detaching the control panel

Attaching the control panel

How to reset your unit

Reset the unit after installation is complete.

• Your preset adjustments will also be erased.

How to forcibly eject a disc

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

PREPARATIONS

Finish

Enter PSM menu. Select an item.

Adjust.

Basic settings

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best

possible performance from the unit.

Installation/connection are explained at the last section of this manual (reverse page, indicated with

symbol).

To keep discs clean

Wipe in a straight line from center of disc to

edge. Do not use liquid cleaners, thinners, or

benzene.

To play new discs

Remove any rough areas from the inner and

outer edges of the disc.

MAINTENANCE

How to clean the connectors

Wipe the connectors with

a cotton swab or cloth

moistened with alcohol.

Moisture condensation

Moisture may condense on the lens inside the unit. Eject

the disc and leave the unit turned on for a few hours until

the moisture has evaporated.

Do not use the following discs:

Connectors

MORE ABOUT THIS UNIT

1 Canceling the display demonstrations

Select “DEMO,” then “DEMO OFF.”

2 Setting the clock

Select “CLOCK H” (hour), then adjust the hour.

Select “CLOCK M” (minute), then adjust the

minute.

Select “24H/12H,” then “24H” (hour) or

“12H” (hour).

Available characters on the display

Available characters Display indications

Warped disc Sticker and sticker residue Stick-on label

Unusual shape

Single CD (8 cm disc)

C-thru Disc (semi-

transparent disc)

Transparent or semi-transparent

parts on its recording area

GET0591-001A

[EE]

– The files on the CD-R/CD-RW are written using the

“Packet Write” method.

– There are improper recording conditions (missing data,

etc.) or media conditions (stained, scratched, warped,

etc.).

• CD-RWs may require a longer readout time since the

reflectance of CD-RWs is lower than that of regular CDs.

Playing an MP3/WMA disc

• This unit can play back MP3/WMA files with the

extension code <.mp3> or <.wma> (regardless of the

letter case—upper/lower).

• This unit can show the names of albums, artists

(performer), and tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for

MP3 files and for WMA files

• This unit can play back MP3/WMA files meeting the

conditions below:

– Bit rate: 8 kbps — 320 kbps

– Sampling frequency:

48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)

24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)

– Disc format: ISO 9660 Level 1/ Level 2, Romeo, Joliet,

Windows long file name

• The maximum number of characters for file/folder names

vary depending on the disc format used (includes 4

extension characters—<.mp3> or <.wma>).

– ISO 9660 Level 1: up to 12 characters; ISO 9660 Level

2: up to 31 characters; Romeo: up to 128 characters;

Joliet: up to 64 characters; Windows long file name: up

to 128 characters

• This unit can recognize a total of 512 files, 255 folders,

and 8 hierarchical levels.

• This unit can play back files recorded in VBR (variable bit

rate).

Files recorded in VBR have a discrepancy in the elapsed

time display, and do not show the actual elapsed time.

In particular, this difference becomes noticeable after

performing the search function.

• This unit cannot play back the following files:

– MP3 files encoded in: MP3i and MP3 PRO format, in an

inappropriate format, layer 1/2.

– WMA files: encoded in lossless, professional, and voice

format; not based upon Windows Media® Audio; copy-

protected with DRM.

– Files which have data such as AIFF, ATRAC3, etc.

• The search function works but search speed is not

constant.

Basic operations

• By pressing SRC on the unit, you can also turn on the

power. If the source is ready, playback also starts.

• If you turn off the power while listening to a track,

playback will start from where it had been stopped

previously next time you turn on the power.

Tuner operations

• During SSM search...

– All previously stored stations are erased and the

stations are stored anew.

– When SSM is over, the station stored in the lowest

preset number will be automatically tuned in.

• Network-Tracking Reception requires two types of Radio

Data System signals—PI (Programme Identification)

and AF (Alternative Frequency) to work correctly.

• If a Traffic Announcement is received by TA Standby

Reception, the volume level automatically changes to the

preset level (TA VOL) if the current level is lower than the

preset level.

• When Alternative Frequency Reception is activated

(with AF selected), Network-Tracking Reception is also

activated automatically. On the other hand, Network-

Tracking Reception cannot be deactivated without

deactivating Alternative Frequency Reception.

Disc operations

Caution for DualDisc playback

• The Non-DVD side of a “DualDisc” does not comply with

the “Compact Disc Digital Audio” standard. Therefore,

the use of Non-DVD side of a DualDisc on this product

may not be recommended.

General

• This unit has been designed to reproduce CDs/CD Texts,

and CD-Rs (Recordable)/CD-RWs (Rewritable) in audio CD

(CD-DA) and MP3/WMA formats.

Playing a CD-R or CD-RW

• Use only “finalized” CD-Rs or CD-RWs.

• This unit can play back multi-session discs; however,

unclosed sessions will be skipped while playing.

• Some CD-Rs or CD-RWs may not be played back on this

unit:

– Discs are dirty or scratched.

– Moisture condensation has occurred on the lens inside

the unit.

– The pickup lens inside the unit is dirty.

INSTRUCTIONS

2– EN

Standby receptions

TA Standby Reception

TA Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA) from any

source other than AM and FM3.

To activate/deactivate TA Standby Reception

• If the TP indicator flashes, TA Standby

Reception is not yet activated.

To activate the reception, tune in to another station

providing Radio Data System signals required for TA

Standby Reception.

PTY Standby Reception

PTY Standby Reception allows the unit to switch

temporarily to your favourite PTY programme from any

source other than AM and FM3.

To activate and select your favourite PTY code for

PTY Standby Reception, see “General settings—PSM:

PTY-STBY.”

• If the PTY indicator flashes, PTY Standby Reception is

not yet activated.

tune in to another station To activate the reception,

providing these signals.

PTY codes

NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE,

SCIENCE, VARIED, POP M (music), ROCK M (music), EASY

M (music), LIGHT M (music), CLASSICS, OTHER M (music),

WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE

IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music),

OLDIES, FOLK M (music), DOCUMENT

Changing the display information

While playing an audio

CD or CD Text

While playing an MP3 or

a WMA disc

A = = B Disc title/

performer *

1 Track =

title *1 (back to the =

beginning)

A B = Album name/=

performer (folder name *2)

= Track title (file name *

= (back to the beginning)

A : The elapsed playing time with the current track

number

B : Clock with the current track number

*1 If the current disc is an audio CD, “NO NAME” appears.

*2 If an MP3/WMA file does not have tags or “TAG DISP” is

set to “TAG OFF,” folder name and file name appear.

Prohibiting disc ejection

You can lock a disc in the loading slot.

To cancel the prohibition, repeat the same procedure.

OPERATIONS

Basic operations

Select the source.

• Turn on the power.

• Turn off the power [Hold].

• Attenuate the sound (if the

power is on).

Volume control.

Detach the panel.

Check the current clock time/other information.

See also “CLK DISP“ of “General settings—PSM.”

Control panel

Display window

Disc indicator

Playback mode / item indicator

• : Lights up in monaural mode.MO

• : Lights up when receiving an FM stereo ST

broadcast with sufficient signal strength.

• Source display

• Track number

• Folder number

• Volume level indicator

• Time countdown indicator

Main display (time,

playback information)

EQ (equalizer) indicator

Sound mode indicator

LOUD (loudness) indicator

Disc information indicators

Tr (track) indicator FM station automatic presetting —SSM (Strong-station Sequential Memory)

You can preset 6 stations for each band.

When an FM stereo broadcast is hard to receive

Radio operations

Select preset station.

Manual presetting (FM/AM)

Example: Storing the FM station of 92.5 MHz into preset number 4 of the FM1 band.

Select “FM/AM.”

Select the bands.

Search for a station—Auto Search.

Manual Search: Hold either one of the buttons until “M” flashes on the display, then press it repeatedly.

Reception improves, but the stereo effect will be lost.

• MO indicator lights up.

To restore the stereo effect, repeat the same procedure.

3.5 mm stereo mini

plug (not supplied)

Portable audio player,

etc.

Turn on the connected

component and start

playing the source.

External component operations

You can connect an external component to the AUX (auxiliary)

input jack on the control panel.

Disc operations

Selecting the playback modes

After pressing M MODE, press the following buttons to...

TRK RPT : Plays the current track

repeatedly.

FLDR RPT * : Plays all tracks of the current

folder repeatedly.

RPT OFF : Cancels.

FLDR RND * : Plays all tracks of the current

folder, then the tracks of the

next folder at random.

ALL RND : Plays all tracks of the current

disc at random.

RND OFF : Cancels.

* Only while playing an MP3 or a WMA disc.

Skipping a track quickly during play

• For MP3/WMA disc, you can skip a track within the

same folder.

Example: Select track 32

Turn on the power.

Insert disc.

All tracks will be played repeatedly until you change the source or eject the disc.

Eject disc.

• “NO DISC” appears.

Press SRC to listen

to another playback

source.

[Press] Select track (for CD) or folder* number

(01 – 06).

[Hold] Select track (for CD) or folder* number

(07 – 12).

* Folders are required to assigned with 2-digit

numbers at the beginning.

• 4 ¢ /

[Press] Go to the previous or next track.

[Hold] Reverses or fast-forwards the track.

• / : Go to the previous or next folder (for 5 ∞

MP3/WMA discs).

FM Radio Data System operations

Searching for your favourite FM Radio Data

System programme

You can tune in to a station broadcasting your favourite

programme by searching for a PTY code.

Storing your favourite programme type

You can store six favourite programme types.

Preset programme types in the number buttons (1 to 6):

Example: Storing “ROCK M” into preset number 4.

Note:

FM1 and FM2:

87.5 MHz – 108.0 MHz

FM3:

65.00 MHz – 74.00 MHz

Tracing the same programme —

Network-Tracking Reception

When driving in an area where FM reception is not

sufficient enough, this unit automatically tunes in to

another FM Radio Data System station of the same

network, possibly broadcasting the same programme

with stronger signals.

To change the Network-Tracking Reception

setting, see “General settings—PSM: AF-REG.”

Programme A broadcasting on different frequency

areas (01 – 05)

Automatic station selection —

Programme Search

Usually when you press the number buttons, the preset

station is tuned in.

If the signals from the FM Radio Data System preset

station are not sufficient for good reception, this

unit, using the AF data, tunes in to another frequency

broadcasting the same programme as the original preset

station is broadcasting.

See “General settings—PSM: P-SEARCH.”

The last selected PTY code

appears.

Select one of your favourite programme

types or a PTY code.

If there is a station broadcasting a

programme of the same PTY code

as you have selected, that station is

tuned in.

Select a PTY code.

Finish.

*You cannot select “CD” as the playback

source if no disc is in the unit.

Radio Data

System indicators

INSTRUCTIONS

3– EN

Audio amplifier section

Maximum Power Output:

Front/Rear: 45 W per channel

Continuous Power Output (RMS):

Front/Rear: 17 W per channel into 4 Ω,

40 Hz to 20 000 Hz at no more

than 0.8% total harmonic

distortion.

Load Impedance: 4

Ω

to 8

Ω

allowance)

Tone Control Range: Bass: ±12 dB at 100 Hz

Treble: ±12 dB at 10 kHz

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Other Terminal: AUX (auxiliary) input jack

Tuner section

Frequency Range:

FM1/2: 87.5 MHz to 108.0 MHz

FM3: 65.00 MHz to 74.00 MHz

AM: MW: 522 kHz to 1 620 kHz

LW: 144 kHz to 279 kHz

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 μV/75 Ω)

50 dB Quieting Sensitivity: 16.3 dBf (1.8 μV/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

[MW Tuner]

Sensitivity/Selectivity: 20 μV/35 dB

[LW Tuner]

Sensitivity: 50 μV

SPECIFICATIONS

CD player section

Type: Compact disc player

Signal Detection System: Non-contact optical pickup

(semiconductor laser)

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Dynamic Range: 93 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

MP3 Decoding Format: (MPEG1/2 Audio Layer 3)

Max. Bit Rate: 320 kbps

WMA (Windows Media® Audio) Decoding Format:

Max. Bit Rate: 192 kbps

General

Power Requirement: Operating Voltage:

DC 14.4 V

(11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature: 0°C to +40°C

Dimensions (W × H × D):

Installation Size (approx.):

182 mm × 52 mm × 160 mm

Panel Size (approx.):

188 mm × 58 mm × 13 mm

Mass (approx.):

1.3 k (excluding accessories)g

Design and specifications are subject to change without

notice.

Sound adjustments

Indication (For) BAS TRE LOUD

USER (Flat sound) 00 00 OFF

ROCK (Rock or disco music) +03 +01 ON

CLASSIC (Classical music) +01 –02 OFF

POPS (Light music) +04 +01 OFF

HIP HOP (Funk or rap music) +02 00 ON

JAZZ (Jazz music) +02 +03 OFF

BAS: Bass; TRE: Treble; LOUD: (loudness)

Adjusting the sound

Preset values

SETTINGS

BAS *1 (bass)

Adjust the bass.

–06 to +06

TRE *1 (treble)

Adjust the treble.

–06 to +06

FAD *2 (fader)

Adjust the front and rear speaker

balance.

R06 to F06

BAL (balance)

Adjust the left and right speaker balance.

L06 to R06

LOUD *1 (loudness)

Boost low and high frequencies to

produce a well-balanced sound at a low

volume level.

LOUD ON or

LOUD OFF

VOL (volume)

Adjust the volume.

00 to 50

(or 00 to 30) *3

*1 When you adjust the bass, treble, or loudness, the

adjustment you have made is stored for the currently

selected sound mode including “USER.”

*2 If you are using a two-speaker system, set the fader level

to “00.”

*3 Depending on the amplifier gain control setting—AMP

GAIN.

Symptoms Remedies/Causes

General

• Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.

• Check the cords and connections.

• This unit does not work at all. Reset the unit.

FM/AM

• SSM automatic presetting does not work. Store stations manually.

• Static noise while listening to the radio. Connect the aerial firmly.

Disc playback

• Disc cannot be played back. Insert the disc correctly.

• CD-R/CD-RW cannot be played back.

• Tracks on the CD-R/CD-RW cannot be

skipped.

• Insert a finalized CD-R/CD-RW.

• Finalize the CD-R/CD-RW with the component which you used

for recording.

• Disc can be neither played back nor ejected. • Unlock the disc.

• Eject the disc forcibly.

• Disc sound is sometimes interrupted. • Stop playback while driving on rough roads.

• Change the disc.

• Check the cords and connections.

• “NO DISC” appears on the display. Insert a playable disc into the loading slot.

• “PLEASE” and “EJECT” appear alternately

on the display.

Press 0, then insert a disc correctly.

MP3/WMA playback

• Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in a format compliant

with ISO 9660 Level 1, Level 2, Romeo, or Joliet.

• Add the extension code <.mp3> or <.wma> to the file names.

• Noise is generated. Skip to another track or change the disc. (Do not add the extension

code <.mp3> or <.wma> to non-MP3 or WMA tracks.)

• A longer readout time is required

(“READING” keeps flashing on the display).

Do not use too many hierarchical levels and folders.

• Tracks are not played back in the order you

have intended.

Playback order is determined when the files are recorded.

• The elapsed playing time is not correct. This sometimes occurs during playback. This is caused by how the

tracks are recorded on the disc.

• The correct characters are not displayed

(e.g. album name).

This unit can only display letters (upper case), numbers, and a

limited number of symbols.

• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United

States and/or other countries.

TROUBLESHOOTING

General settings—PSM

Indication Item ( : Initial) Setting

DEMO DEMO ON•

• DEMO OFF

: The display demonstration will be activated automatically if no

operation is done for about 20 seconds.

: Cancels.

CLK DISP *1• ON

• OFF

: The clock time is shown on the display at all times when the power is

turned off.

: Cancels; pressing DISP will show the clock time for about 5 seconds

when the power is turned off.

CLOCK H 0 23 1 12 (Hour) – ( – ) : [Initial: 0 (0:00)]

CLOCK M 00 59 (Minute) – : [Initial: 00 (0:00)]

24H/12H 24H•

• 12H

: See “Basic settings.”

CLK ADJ *2• AUTO

• OFF

: The built-in clock is automatically adjusted using the CT (clock time)

data in the Radio Data System signal.

: Cancels.

AF-REG *

2• AF

• AF REG

• OFF

: When the currently received signals become weak, the unit switches

to another station (the programme may differ from the one currently

received).

• The AF indicator lights up.

: When the currently received signals become weak, the unit switches to

another station broadcasting the same programme.

• The AF and REG indicators light up.

: Cancels.

PTY-STBY *2OFF, PTY codes Activates PTY Standby Reception with one of the PTY codes.

TA VOL *2VOL 00 VOL 50 – (or

VOL 00 VOL 30 – ) *3

[Initial: VOL 15]

P-SEARCH *2• ON

• OFF

: Activates Programme Search.

: Cancels.

DIMMER ON•

• OFF

: Dims the display and button illumination.

: Cancels.

TEL MUTING 1/•

MUTING 2

• OFF

: Select either one which mutes the sounds while using a cellular phone.

: Cancels.

SCROLL *4• ONCE

• AUTO

• OFF

: Scrolls the displayed information once.

: Repeats scrolling (at 5-second intervals).

: Cancels.

• Pressing DISP for more than one second can scroll the display

regardless of the setting.

AUX ADJ A.ADJ 00

– A.ADJ 05

: Adjust the auxiliary input level to avoid the sudden increase of the

output level when changing the source to external component

connected to the AUX input jack on the control panel.

TAG DISP TAG ON•

• TAG OFF

: Shows the tag while playing MP3/WMA tracks.

: Cancels.

AMP GAIN • LOW PWR

• HIGH PWR

: VOL 00 – VOL 30 (Select if the maximum power of each speaker is less

than 45 W to prevent the speaker from being damaged.)

: VOL 00 – VOL 50

IF BAND AUTO•

• WIDE

: Increases the tuner selectivity to reduce interference noise between

adjacent stations. (The stereo effect may be lost.)

: Subject to the interference noise from adjacent stations, but the sound

quality will not be degraded and the stereo effect will remain.

*1 If the power supply is not interrupted by turning off the ignition key of your car, it is recommended that you select “OFF” to

save the car’s battery.

*2 Only for FM Radio Data System stations.

*3 Depends on the amplifier gain control.

*4 Some characters or symbols will not be shown correctly (or will be blanked) on the display.

Select an item. Adjust. Finish.

Enter PSM menu.

Product specificaties

Merk:	JVC
Categorie:	Autoradio
Model:	KD-R207EE

Heb je hulp nodig?

Als je hulp nodig hebt met JVC KD-R207EE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Autoradio JVC

JVC KD-R907EE Handleiding

30 Juni 2023

JVC KD-DB97BTE Handleiding

17 Juni 2023

JVC DEH-4900DAB Handleiding

16 Juni 2023

JVC KD-T910BTS Handleiding

15 Juni 2023

JVC KS-FX8R Handleiding

8 Juni 2023

JVC KD-R731BT Handleiding

2 Juni 2023

JVC KW-AVX626 Handleiding

1 Juni 2023

JVC KD-DV7306 Handleiding

26 Mei 2023

JVC KD-MX3000R Handleiding

20 Mei 2023

JVC KD-R451 Handleiding

20 Mei 2023

Handleiding Autoradio

Nieuwste handleidingen voor Autoradio

Renkforce RF-ARAR-400 Handleiding

15 December 2024

Boss MR63UAB Handleiding

11 December 2024

Alpine CTA-1505R Handleiding

8 December 2024

Alpine MRP-M850 Handleiding

8 December 2024

Pioneer AVH-A240DAB Handleiding

7 December 2024

Audio-Technica AT-RX80 Handleiding

6 December 2024

Pyle PLMR7BTW Handleiding

5 December 2024

Pyle PLTS79DUB Handleiding

5 December 2024

Pyle UPLMR15BW Handleiding

5 December 2024

Pyle PLTS73FX Handleiding

5 December 2024