JVC DLA-VS2300ZG Handleiding
JVC
Beamer projector
DLA-VS2300ZG
Lees hieronder de 📖 handleiding in het Nederlandse voor JVC DLA-VS2300ZG (56 pagina's) in de categorie Beamer projector. Deze handleiding was nuttig voor 100 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/56
.
D-ILA
PROJECTOR
DLA-VS2500ZG
DLA-VS2500G
DLA-VS2300ZG
DLA-VS2300G
.
.
For Customer use :
Enter below the model No. and
the serial No. which are located
on the back of the cabinet. Retain
this information for future
reference.
Model No.
Serial No.
INSTRUCTIONS
B5A-0626-40
Getting Started Set up Operate Adjust/Set Maintenance
Troubleshooting
Others
Safety Precautions
IMPORTANT INFORMATION
WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
WARNING
This equipment is compliant with Class A of CISPR
32.
In residential environment this equipment may
cause radio interference.
NOISE EMISSION DECLARATION
The sound pressure level at the operator position is
equal or less than 50dB(A) according to ISO7779.
About the installation place
Do not install the projector in a place that cannot
support its weight securely.
If the installation place is not sturdy enough, the
projector could fall or overturn, possibly causing
personal injury.
WARNING:
THIS APPARATUS MUST BE EARTHED.
WARNING To DLA-VS2500ZG, VS2300ZG
REMOVE THE LENS COVER BEFORE TURNING
ON THE PROJECTOR
CAUTION:
To reduce the risk of electric shock, do not remove
cover. Refer servicing to qualified service personnel.
This projector is equipped with a 3-blade grounding
type plug to satisfy FCC rule. If you are unable to
insert the plug into the outlet, contact your electrician.
FCC INFORMATION (U.S.A. only)
CAUTION:
Changes or modification not approved by JVC could
void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful interference
to radio communications. Operation of this
equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his own
expense.
2
Getting Started
150 mm and above
150 mm
and above
300 mm
and above
200 mm
and above
300 mm
and above
PORTABLE CART WARNING
(symbol provided by RETAC)
S3126A
Front
-
-
-
-
-
-
-
-
-
-
-
-
-
IMPORTANT SAFEGUARDS
Electrical energy can perform many useful functions.
This unit has been engineered and manufactured to
assure your personal safety. But IMPROPER USE
CAN RESULT IN POTENTIAL ELECTRICAL
SHOCK OR FIRE HAZARD. In order not to defeat
the safeguards incorporated into this product,
observe the following basic rules for its installation,
use and service. Please read these Important
Safeguards carefully before use.
All the safety and operating instructions should be read
before the product is operated.
The safety and operating instructions should be retained for
future reference.
All warnings on the product and in the operating
instructions should be adhered to.
All operating instructions should be followed.
Place the projector near a wall outlet where the plug can be
easily unplugged.
Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
Do not use attachments not recommended by the product
manufacturer as they may be hazardous.
Do not use this product near water. Do not use immediately
after moving from a low temperature to high temperature,
as this causes condensation, which may result in fire,
electric shock, or other hazards.
Do not place this product on an unstable cart, stand, or
table. The product may fall, causing serious injury to a child
or adult, and serious damage to the product. The product
should be mounted according to the manufacturer’s
instructions, and should use a mount recommended by the
manufacturer.
When the product is used on a cart,
care should be taken to avoid quick
stops, excessive force, and uneven
surfaces which may cause the product
and cart to overturn, damaging
equipment or causing possible injury to
the operator.
Slots and openings in the cabinet are provided for
ventilation. These ensure reliable operation of the product
and protect it from overheating. These openings must not
be blocked or covered. (The openings should never be
blocked by placing the product on bed, sofa, rug, or similar
surface. It should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided
and the manufacturer’s instructions have been adhered to.)
To allow better heat dissipation, keep a clearance between
this unit and its surrounding as shown below. When this unit
is enclosed in a space of dimensions as shown below, use
an air-conditioner so that the internal and external
temperatures are the same. Overheating can cause
damage.
-
-
-
-
-
-
-
-
-
-
-
-
a)
b)
c)
d)
e)
f)
When the power supply cord or plug is damaged.
If liquid has been spilled, or objects have fallen on the
product.
If the product has been exposed to rain or water.
If the product does not operate normally by following the
operating instructions. Adjust only those controls that
are covered by the Operation Manual, as an improper
adjustment of controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to normal operation.
If the product has been dropped or damaged in any
way.
When the product exhibits a distinct change in
performance, this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer or with same characteristics as the original
part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
The product should be placed more than one foot away
from heat sources such as radiators, heat registers, stoves,
and other products (including amplifiers) that produce heat.
When connecting other products such as VCR’s, and DVD
players, you should turn off the power of this product for
protection against electric shock.
Power source indicated on the label. If you are not sure of
the type of power supply to your home, consult your
product dealer or local power company.
This product is equipped with a three-wire plug. This plug
will fit only into a grounded power outlet. If you are unable
to insert the plug into the outlet, contact your electrician to
install the proper outlet. Do not defeat the safety purpose of
the grounded plug.
Power-supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or
against them. Pay particular attention to cords at doors,
plugs, receptacles, and the point where they exit from the
product.
For added protection of this product during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the cable system. This will prevent damage to
the product due to lightning and power line surges.
Do not overload wall outlets, extension cords, or
convenience receptacles on other equipment as this can
result in a risk of fire or electric shock.
Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous voltages
and other hazards. Refer all service to qualified service
personnel.
Unplug this product from the wall outlet and refer service to
qualified service personnel under the following conditions:
3
Getting Started
Product specificaties
| Merk: | JVC |
| Categorie: | Beamer projector |
| Model: | DLA-VS2300ZG |
Heb je hulp nodig?
Als je hulp nodig hebt met JVC DLA-VS2300ZG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Beamer projector JVC
15 Augustus 2022
16 Augustus 2022
16 Augustus 2022
15 Augustus 2022
16 Augustus 2022
16 Augustus 2022
16 Augustus 2022
7 Februari 2022
10 November 2021
9 November 2021
Handleiding Beamer projector
- Beamer projector Philips
- Beamer projector HP
- Beamer projector Sony
- Beamer projector Casio
- Beamer projector Panasonic
- Beamer projector Epson
- Beamer projector Canon
- Beamer projector Medion
- Beamer projector Toshiba
- Beamer projector Yamaha
- Beamer projector Aaxa
- Beamer projector Acer
- Beamer projector Aiptek
- Beamer projector Apeman
- Beamer projector Auna
- Beamer projector Bauer
- Beamer projector BenQ
- Beamer projector Brookstone
- Beamer projector Dell
- Beamer projector DreamVision
- Beamer projector Eiki
- Beamer projector Eumig
- Beamer projector FengMi Wemax
- Beamer projector Fenton
- Beamer projector Ibm
- Beamer projector InFocus
- Beamer projector Kodak
- Beamer projector La Vague
- Beamer projector Legamaster
- Beamer projector Mitsubishi
- Beamer projector Nebula
- Beamer projector Nec
- Beamer projector Nobo
- Beamer projector Nor-tec
- Beamer projector Sagem
- Beamer projector Sanyo
- Beamer projector Skytronic
- Beamer projector Stereoboomm
- Beamer projector Viewsonic
- Beamer projector Vivitek
- Beamer projector XGIMI
- Beamer projector Optoma
- Beamer projector Overmax
Nieuwste handleidingen voor Beamer projector
28 September 2024
7 Januari 2024
22 September 2023
31 Augustus 2023
27 Augustus 2023
31 Augustus 2023
27 Augustus 2023
31 Augustus 2023
31 Augustus 2023
31 Augustus 2023