Jupio BVM0255 Handleiding

Jupio Niet gecategoriseerd BVM0255

Lees hieronder de 📖 handleiding in het Nederlandse voor Jupio BVM0255 (15 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/15

EN Manual Jupio ProLine V-Mount Hotswap Adapter Plate

Thank you for purchasing this Jupio ProLine V-Mount Hotswap Adapter

Plate. To ensure your safety, please read this manual carefully before

using and keep it for future reference.

For use as a battery charger

Install 1 or 2 batteries onto the V-mount Hotswap Adapter Plate. Both

the V-mount Terminal and the bidirectional D-tap can charge the batteries.

When charging, the LED indicator for the remaining capacity of the

respective battery lights up with one LED light for 25% capacity, two LED

lights for 50% capacity, three LED lights for 75% capacity and four LED

lights for 100% capacity or in other words a fully charged battery.

This V-mount Hotswap Adapter Plate alternately charges two installed

batteries. After the two batteries are fully charged, the corresponding LED

lights will remain on for a long time.

For use as a power supply

V-mount Hotswap Adapter Plate can be installed on a V-mount device for

use as a power supply. During the discharge process, the LED indicator

light of the adapter plate shows the power in real time. When the battery

power is too low or if a battery is removed during the discharge process,

the V-mount Hotswap Adapter Plate will automatically switch to another

battery for power supply. During the switching process, the electrical

device or instrument will not switch off and can therefore be used normally.

Install two fully charged batteries in the V-mount Hotswap Adapter Plate

and then connect it to the V-Mount device.

If one battery is fully charged and one battery is not fully charged, the

lower capacity battery will be discharged first.

Using this V-mount Hotswap Adapter Plate on a V-mount camera is the

same as using a BP-V series battery (BP-V47 / BP-V95 / BP-V142 /

BP-V190 / BP-V200 ). The battery power information can be viewed on the

camera itself.

Press the power test button to check the realtime capacity of the

respective battery. If the battery power is too low, the LED indicator will not

light up.

Caution

1. If the V-mount Battery Swap Adapter Plate is not to be used for an

extended period of time, unplug the power cord and remove the battery.

2. Keep the V-mount Battery Swap Adapter Plate in a dry and well-

ventilated evironment.

3. After installing a battery on the V-mount Battery Swap Adapter Plate,

please check if the battery lock lever is fully rebounced and that the

battery is secure, to prevent it from falling off.