Jung PMK360 Handleiding
Jung
Bewegingsdetector
PMK360
Lees hieronder de 📖 handleiding in het Nederlandse voor Jung PMK360 (11 pagina's) in de categorie Bewegingsdetector. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/11
Presence detector compact
Light Management
Presence detector compact
Art. No. : PMK 360 WW
Presence detector compact
Art. No. : PMK 360 AL
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. At the same time, take into account all circuit breakers that supply dangerous
voltage to the device or load.
Do not press on the lens. Device can be damaged.
The device is not suitable for use as a burglar alarm or other alarm.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Device components
(1) Brightness sensor
(2) Sensor window
(3) Decor ring
(4) Connection box
(5) LED
(6) Adjuster , run-on timetime
(7) Adjuster , Brightnesslux
3 Function
Intended use
1/11
82552623
J0082552623 04.09.2015
- Automatic switching of lighting depending on the heat motion and ambient brightness.
- Ceiling installation, surface-mounted
Product characteristics
- 2-point light control
- Run-on time and brightness value settable
- Test operation for checking the detection area
- Push-on cover for limiting the detection area
- Parallel connection of multiple presence detectors possible
- Manual switch-on and switch-off possible with installation button
Automatic operation
The presence detector detects heat motions of people, animals and objects.
- The light is switched on if someone or something enters the monitored detection area and
the brightness is below the set level.
- The light remains switched on as long as there are motions present in the detection area
and the brightness is not below the set level.
- The light is switched off if no more movement is detected in the detection area and the run-
on time has elapsed.
- The light is switched off if the brightness exceeds twice the set value for longer than
10 minutes.
iThe minimum switch-off brightness is 400 lux, even if a lower value is set.
Function of presence detectors that are connected in parallel
Presence detectors that are connected in parallel operate largely independently of each other.
Run-on time and brightness are set separately on each presence detector. A soon as a
presence detector switches on, this is detected by the other presence detectors. They switch on
when there is motion in their detection area, unless the brightness in their detection area is
double the set value.
As a general rule, the following applies: the light is switched on when the first presence detector
switches on, and is switched off when the last presence detector switches off.
Behaviour in case of a mains failure
- Less than 0.2 seconds: the old switching position is restored after mains return.
- Longer than 0.2 seconds: a self-test is performed after mains return. This takes approx.
30 seconds. The light is switched on during the self-test; operation via extensions is not
possible.
4 Operation
Switching on the light
An installation button is connected.
oPress the installation button.
The light is switched on for at least 2 minutes.
iIf motions are detected, the light remains on after the 2 minutes have elapsed. The run-on
time is set to the time specified on the adjuster.
iIf the adjuster is set to , then the light remains switched on as long as thetime test
installation button is pressed. The light remains switched off for approx. 1 second after
release.
Switching the light off
It is possible to switch the automatic function off in a targeted fashion, e.g. in order to darken a
room.
An installation button is connected.
Light is switched on
oPress the installation button.
2/11
82552623
J0082552623 04.09.2015
Light Management
Presence detector compact
The light is switched off for 3 minutes. Each detected motion extends the time by
3 minutes. After the 3 minutes have elapsed the presence detector is in automatic mode
again. During these 3 minutes the light can only be switched on using the installation
button.
iIn the case of presence detectors connected in parallel the time in each device elapses
independently of each other. The result may be unwanted switching-on of the light, if the
time has already elapsed in a presence detector and if it detects motions.
Switching off the brightness evaluation
The brightness evaluation can be switched off if the brightness is perceived as too dark after the
light is switched off.
An installation button is connected.
The presence detector has switched the light off due to adequate extraneous light, e.g. daylight.
oPress the installation button within 3 minutes after switch-off.
The light is switched on. The light remains switched on as long as the presence detector
detects motions. The brightness is not evaluated.
iAfter the run-on time has elapsed, the presence detector switches off and is in automatic
mode once again.
5 Information for electrically skilled persons
5.1 Fitting and electrical connection
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
Before carrying out work on the device or load, disengage all the
corresponding circuit breakers. Cover up live parts in the working environment.
Selecting the installation location
Figure 2
The presence detector is installed on the ceiling, and monitors the surface under it (figure 2).
The presence detector has a detection area of 360°. Die PIR sensor system operates with 6
detection levels and 80 lenses.
3/11
82552623
J0082552623 04.09.2015
Light Management
Presence detector compact
Product specificaties
| Merk: | Jung |
| Categorie: | Bewegingsdetector |
| Model: | PMK360 |
Heb je hulp nodig?
Als je hulp nodig hebt met Jung PMK360 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Bewegingsdetector Jung
23 Augustus 2024
23 Augustus 2024
23 Augustus 2024
23 Augustus 2024
23 Augustus 2024
23 Augustus 2024
23 Augustus 2024
23 Augustus 2024
23 Augustus 2024
23 Augustus 2024
Handleiding Bewegingsdetector
- Bewegingsdetector Philips
- Bewegingsdetector Gigaset
- Bewegingsdetector Honeywell
- Bewegingsdetector Abus
- Bewegingsdetector ACME
- Bewegingsdetector Alecto
- Bewegingsdetector Axis
- Bewegingsdetector Berker
- Bewegingsdetector Blaupunkt
- Bewegingsdetector Brinno
- Bewegingsdetector D-Link
- Bewegingsdetector DESQ
- Bewegingsdetector Devolo
- Bewegingsdetector Eaton
- Bewegingsdetector Elgato
- Bewegingsdetector Eminent
- Bewegingsdetector EQ-3
- Bewegingsdetector ESYLUX
- Bewegingsdetector Gira
- Bewegingsdetector Goobay
- Bewegingsdetector Grothe
- Bewegingsdetector Hager
- Bewegingsdetector Hikvision
- Bewegingsdetector HQ
- Bewegingsdetector Iget
- Bewegingsdetector Interlogix
- Bewegingsdetector KlikaanKlikuit
- Bewegingsdetector Kogan
- Bewegingsdetector Konig
- Bewegingsdetector Kopp
- Bewegingsdetector Marmitek
- Bewegingsdetector Nedis
- Bewegingsdetector Niko
- Bewegingsdetector Perel
- Bewegingsdetector Powerfix
- Bewegingsdetector Renkforce
- Bewegingsdetector Satel
- Bewegingsdetector Schneider
- Bewegingsdetector Smartwares
- Bewegingsdetector Somfy
- Bewegingsdetector Steinel
- Bewegingsdetector Suevia
- Bewegingsdetector Theben
- Bewegingsdetector TP Link
- Bewegingsdetector Trust
- Bewegingsdetector V-Tac
- Bewegingsdetector Velleman
- Bewegingsdetector Xavax
- Bewegingsdetector Yale
- Bewegingsdetector Joy-it
- Bewegingsdetector Olympia
- Bewegingsdetector Optex
- Bewegingsdetector Orbis
- Bewegingsdetector Schwaiger
- Bewegingsdetector Steren
- Bewegingsdetector Cotech
- Bewegingsdetector Arlo
- Bewegingsdetector Techly
- Bewegingsdetector DSC
- Bewegingsdetector Merten
- Bewegingsdetector Chacon
- Bewegingsdetector Nexa
- Bewegingsdetector Swann
- Bewegingsdetector Vemer
- Bewegingsdetector Fibaro
- Bewegingsdetector GEV
- Bewegingsdetector Lucide
- Bewegingsdetector Massive
- Bewegingsdetector XQ-Lite
- Bewegingsdetector Chamberlain
- Bewegingsdetector IFM
- Bewegingsdetector Dahua Technology
- Bewegingsdetector Speed-Link
- Bewegingsdetector Aqua Joe
- Bewegingsdetector Busch-Jaeger
- Bewegingsdetector EVE
- Bewegingsdetector Wentronic
- Bewegingsdetector EQ3
- Bewegingsdetector Homematic IP
- Bewegingsdetector Extron
- Bewegingsdetector Vernier
- Bewegingsdetector Crestron
- Bewegingsdetector Chuango
- Bewegingsdetector ORNO
- Bewegingsdetector Maxsa
- Bewegingsdetector Vimar
- Bewegingsdetector Legrand
- Bewegingsdetector Intertechno
- Bewegingsdetector Inovonics
- Bewegingsdetector Bitron
- Bewegingsdetector InLine
- Bewegingsdetector EtiamPro
- Bewegingsdetector Pentatech
- Bewegingsdetector RAB
- Bewegingsdetector BEA
- Bewegingsdetector Tellur
- Bewegingsdetector Megatron
- Bewegingsdetector Ledvance
- Bewegingsdetector Gewiss
- Bewegingsdetector ALC
- Bewegingsdetector Avigilon
- Bewegingsdetector Pepperl+Fuchs
Nieuwste handleidingen voor Bewegingsdetector
16 December 2024
16 December 2024
16 December 2024
16 December 2024
16 December 2024
16 December 2024
8 December 2024
8 December 2024
8 December 2024
5 December 2024