Jung ESU230-2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Jung ESU230-2 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Key card holder RFID and energy saving unit
23.07.20201 / 40024018702
Key card holder RFID
Ref.-no.: .. CARD RFID ..
Energy saving unit
Ref.-no.: ESU 230-2
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, îš¿re or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the devise or load.
These instructions are an integral part of the product, and must remain with the end customer.
2 Device components
12
3
4
Fig. 1: Device components
(1) Energy saving unit
(2) Frame
(3) Key card holder RFID
(4) RGB lens
3 Function
Intended use
- Switching of lighting and other loads
- Triggering of external control systems
- Installation in ush-box according to DIN 49073
Product characteristics
- Operation with RFID cards according to ISO/IEC 14443 and ISO/IEC 15693
- 2 make contacts, one of them with conîš¿gurable run-on time
- Status indication with RGB lens
- Lens is dimming down 30 s after inserting the card
- Run-on time is signalled by RGB lens after removing the card
GB
Key card holder RFID and energy saving unit
23.07.20203 / 40024018702
5 Information for electrically skilled persons
Installation and electrical connection
DANGER
Electric shock from touching live parts in the installation environment.
An electric shock can be fatal.
Before working on the device, disconnect the power and cover live parts in the area.
Connecting and îš¿tting the device
N
L
1
5
A1 A2
AC 230 V~
Fig. 3: Connection
LOW
MID
HIGH
A1 A2
N
LAC 230 V~
1
6
5
Fig. 4: Connection to TRD .. 230..8 ..
(5) Load
(6) Temperature controller e.g. TRD .. 23028 .. or TRD .. 23048 ..
• Connect load according to wiring diagram (g. 3 or 4).
• Install insert (1) in wall box, terminals must be at the bottom.
• Attach the frame (2) and the cover (3).
• Switch on mains voltage.


Product specificaties

Merk: Jung
Categorie: Niet gecategoriseerd
Model: ESU230-2

Heb je hulp nodig?

Als je hulp nodig hebt met Jung ESU230-2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Jung

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd