Juki Excite G210 Handleiding

Juki Naaimachines Excite G210

Lees hieronder de 📖 handleiding in het Nederlandse voor Juki Excite G210 (116 pagina's) in de categorie Naaimachines. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/116
COMPUTER SEWING MACHINE
MACHINE ELECTRONIQUE
MÁQUINA DE COSER ELECTRÓNICA
ШВЕЙНАЯ МАШИНА С ЭЛЕКТРОННЫМ УПРАВЛЕНИЕМ
HZL-G series
INSTRUCTION MANUAL
MANUEL D'INSTRUCTIONS
MANUAL DE INSTRUCCIONES
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
Attention
Please read this instruction manual before using
the machine as it contains important operational
and safety information.
Keep this manual accessible so that you may refer
to it at anytime while operating the machine.
ВНИМАНИЕ
Перед началом работы внимательно
прочитайте эту инструкцию по эксплуатации,
так как она содержит важную информацию
по работе с машиной а также по технике
безопасности.
Attention
Avant de mettre la machine en marche, lire
attentivement et assimiler les règles de securité
de ce manuel.
Conserver le manuel an de pouvoir le consulter
ultérieurement.
Atención
Lea este manual de instrucciones antes de utilizar
la máquina, porque contiene información de
operación y seguridad importante.
Mantenga este manual accesible para poder
consultarlo en cualquier momento cuando utilice
la máquina.
1
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be followed, including the following:
Read all instructions before using this sewing machine.
DANGER-To reduce the risk of electric shock:
1. An appliance should never be left unattended when plugged in.
2. Always unplug this appliance from the electric outlet immediately after using and before cleaning.
WARNING-To reduce the risk of burns, re, electric shock, or inquiry to persons:
1. Do not allow this appliance to be used as a toy. Close attention is necessary when this appliance is used by or near
children.
2. Use this appliance only for its intended use as described in this manual. Use only attachments recommended by the
manufacturer as contained in this manual.
3. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or
damaged, or dropped into water. Return the appliance to the nearest authorized dealer or service center for examination,
repair, electrical or mechanical adjustment.
4. Never operate the appliance with any air openings blocked. Keep ventilation openings of the sewing machine and foot
controller free from the accumulation of lint, dust and loose cloth.
5. Keep ngers away from all moving parts. Special care is required around the sewing machine needl
e.
6. Always use the proper throat plate. The wrong plate can cause the needle to break.
7. Do not use bent needles.
8. Do not pull or push fabric while stitching. It may deect the needle causing it to break.
9. Switch the sewing machine off (“O”) when making any adjustments in the needle area, such as threading needle,
changing needle, threading bobbin, or changing presser foot and the like.
10. Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or when making any other
user servicing adjustments mentioned in the instruction manual.
11. Never drop or insert any object into any opening.
12. Do not use outdoors.
13. Do not operate where aerosol (spray) products are being used or when oxygen is being administered.
14. To disconnect, turn all controls to the off (“O”) position, then remove plug from outlet.
15. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
SAVE THESE INSTRUCTIONS
This sewing machine is intended for household use only.
Foot controller: Model 4C-339G
Foot controller can be used on sewing machine model HZL-G210 or HZL-G110.
The working temperature of sewing machine is from 5 to 40 degree Celsius. Do not use sewing machine under direct
sunlight, near a heat source such as stove, iron, candle or any hot objects and in the place where temperature is high.
Otherwise temperature inside sewing machine becomes high and/or vinyl of the power cord may be damaged, resulting in
re or an electric shock.
Always check a combination of material, thread and needle size. (Refer to page 43.) If the combination is not right, for exam-
ple, sewing thick material such as denim with thin needle like size 11 and smaller, needle may break and it will cause injury to
your body.
● Do not use thinner or other similar solvents to clean
machine.
● Do not expose machine to direct sunlight or humid
atmosphere.
As the microcomputer(s), semi-conductor(s) and precise wiring board(s) is built in this sewing machine,
please pay attention that the following condition(s) may occur.
● Use this product in a temperature between 5 and 40
degree Celsius. If temperature is extremely low, this
sewing machine may not work properly.
● This sewing machine will stop due to safety mechanism
to prevent the machine from overheating, when it sews
slowly and for a long time. In this event, Start and Stop
button will not light.
The sewing machine will
return to working condition
after about 10 minutes.
2
Thank you for purchasing our products.
To safely and properly use this product, please read the instruction manual carefully and understand
the properties of this computer sewing machine. This machine is composed of well-chosen brand-name parts
and is well quality controlled. Please try a variety of different sewing methods and have fun.
Stop!


Product specificaties

Merk: Juki
Categorie: Naaimachines
Model: Excite G210

Heb je hulp nodig?

Als je hulp nodig hebt met Juki Excite G210 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden