Juki AK-154 Handleiding

Juki Naaimachine AK-154

Lees hieronder de 📖 handleiding in het Nederlandse voor Juki AK-154 (9 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
INSTRUCTION MANUAL
AK-154
i
CONTENTS
1. FEATURES 1 ..............................................................................................
2. INSTALLATION 2 .......................................................................................
3. HOW TO SELECT THE FUNCTION OF AUTO-LIFTER 5 .......................
4. OTHERS (Advanced edition) 6 ................................................................
4-1.
Function for reducing the presser foot pressure at the beginning of sewing
....6
4-2. Presser foot lifting height setting function in the case the sewing machine
stops with its needle-bar up. 7 ................................................................................
4-3. Presser operating speed changing function 7 ......................................................
This is the auto-lifter incorporating the cam which is driven by the stepping motor.
After the presser foot is lifted by the auto-lifter, it is retained at its upper position by the cam. As a
result, the power consumption is reduced.
Since this auto-lifter does not produce solenoid-like impact noise, the comfortable work environment
is maintained.
Function for reducing the presser foot pressure at the beginning of sewing
If the needle thread is not properly drawn down under the material fabric while the thread presser
(NB device) is used, the assist function for reducing the presser foot pressure at the beginning of
sewing to help the needle thread to be smoothly drawn under the material fabric can be enabled.
* The AK device operates with the factory-set value by turning it ON.
Presser-foot lifting height setting function
The lifting height of the presser foot can be set in two different stages. When the back part of pedal
is depressed during sewing, the thread trimmer trims thread, then the presser foot automatically
goes up to its 1st lifting height.
When the back part of pedal is strongly depressed while the sewing machine is at rest or after the
completion of thread trimming, the presser foot goes up to its 2nd lifting height.
Factory-set amount of lift of the
presser foot at the time of shipment
Features
1st lifting height of presser foot 5.0 mm 0.1 to 8.5 mm
2nd lifting height of presser foot 8.5 mm 8.5 to 13.5 mm
1. FEATURES
Presser operating speed changing function
For reducing the operating noise or further reducing the material damage by the presser foot when
it is lowered to contact the material, the presser operating speed can be changed appropriately.
– 1 –


Product specificaties

Merk: Juki
Categorie: Naaimachine
Model: AK-154

Heb je hulp nodig?

Als je hulp nodig hebt met Juki AK-154 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Naaimachine Juki

Handleiding Naaimachine

Nieuwste handleidingen voor Naaimachine