Joy-it SBC-LCD1.28R Handleiding

Joy-it Monitor SBC-LCD1.28R

Lees hieronder de 📖 handleiding in het Nederlandse voor Joy-it SBC-LCD1.28R (5 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
ROUND 1.28" LCD DISPLAY
Circular IPS LCD display with 4-Wire SPI interface
Joy-IT powered by SIMAC Electronics GmbH - Pascalstr. 8 - 47506 Neukirchen-Vluyn - www.joy-it.net
Dear customer,
thank you for choosing our product. In the following, we will show you
what to consider during commissioning and use.
Should you encounter any unexpected problems during use, please feel
free to contact us.
The 1.28" LCD display convinces with its high-resolution IPS display and
its circular display surface. With a color depth of 65,000 colors, the
display is of particularly high quality.
Due to the control via the SPI interface, the display is ideally suited for
use as an output device on microcontrollers and single board computers.
SPEZIFIKATIONEN
1. GENERAL INFORMATION
2. BASICS
First connect the module to your Arduino as follows:
3. APPLICATION EXAMPLE ARDUINO
For the use of our soî ¨ware example the installation of the GFX Library
for Arduino is required. To install it, rst open the library manager in your
Arduino IDE at Sketch → Include Library Manage Libraries → .
Here, type GFX Library for Arduino in the search box and install the library
titled GFX Library for Arduino.
You can download the sample program . Open this and transfer it to your here
Arduino.
ARDUINO 1.28" LCD DISPLAY
3,3 V
GND
D8
D13
VCC
GND
DC
CLK
D11
D7
D6
D9
DIN
RST
BL
CS
First connect the module to your Raspberry Pi as follows:
4. APPLICATION EXAMPLE RASPBERRY PI


Product specificaties

Merk: Joy-it
Categorie: Monitor
Model: SBC-LCD1.28R

Heb je hulp nodig?

Als je hulp nodig hebt met Joy-it SBC-LCD1.28R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Monitor Joy-it

Handleiding Monitor

Nieuwste handleidingen voor Monitor