Joy-it RB-LEDMatrix Handleiding

Joy-it Niet gecategoriseerd RB-LEDMatrix

Lees hieronder de 📖 handleiding in het Nederlandse voor Joy-it RB-LEDMatrix (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

RB-LEDMatrix

Expansion board with 2 LED matrices for Raspberry PI

1. GENERAL INFORMATION

Dear customer,

thank you very much for choosing our product.

In following, we will introduce you to what to observe while starting up

and using this product.

Should you encounter any unexpected problems during use, please do

not hesitate to contact us.

2. USE WITH THE RASPBERRY PI

2.1 Installing the soware

If you are already using a current Raspberry Pi OS on your Raspberry Pi, you can skip this step and

continue immediately with step 2.2.

Install on your SD card using the program the current Raspbian Image, which you „Win32 Disk Imager“ -

can download under the following .link

2.2 Connecting the module

Place the module on pins 1 to 26 of your Raspberry Pi as shown in the following picture. Note that the

module is placed with the overhang facing the Raspberry Pi.

3. CODE EXAMPLE FOR RASPBERRY PI

3.1 Preparation of the module

Once you have started and set up the system, open the console and execute the following

commands:

sudo apt-get update

sudo apt-get upgrade

sudo raspi-config

Aer executing the previous two commands, we now activate the SPI by typing

into the console. Then the following should appear.

We select with the arrow keys and confirm with .3 Interfacing Options Enter

Aer that you will see the following:

We select with the arrow keys and confirm with .P4 SPI Enter

Then we confirm with and leave the menu by using the Enter 2 more times right arrow button 2

times Enter and confirm with .

Product specificaties

Merk:	Joy-it
Categorie:	Niet gecategoriseerd
Model:	RB-LEDMatrix
Kleur van het product:	Black, Blue, White
Gewicht:	28 g
Breedte:	64.3 mm
Diepte:	21.8 mm
Hoogte:	35 mm
Merkcompatibiliteit:	Arduino
Compatibiliteit:	Arduino/Raspberry Pi
Type product:	Led-matrix