Joy-it ARD MEGA2560R3 Handleiding

Joy-it Niet gecategoriseerd ARD MEGA2560R3

Lees hieronder de 📖 handleiding in het Nederlandse voor Joy-it ARD MEGA2560R3 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

ARD_MEGA2560R3

Arduino Mega 2560 compatible microcontroller, not an original Arduino

1. GENERAL INFORMATION & SAFETY INSTRUCTIONS

Dear customer,

thank you for choosing a Joy-IT product. Our board is a high quality replica

and compatible to the Arduino Mega 2560 but it is not an original Arduino.

The „Mega Board“ is the right microcontroller board for those who want to

get quickly and easily into the world of programming.

On the internet, you will nd a variety of tutorials and manuals for this

microcontroller board that will give you an easy introduction to the world of

programming.

The ATMega2560 microcontroller oers you enough performance for your

ideas and projects. It is 101.52 x 53.3 mm in size and has more connections

than others with 54 digital in- / outputs and 16 analog inputs.

2. TECHNICAL SPECIFICATIONS

3. PINOUT

Model

EAN

Microcontroller

Input voltage

Input voltage (max.)

Digital IO

Analog IO

DC current IO

DC current 3.3 V

Storage

SRAM

EEPROM

Clock Speed

Dimensions

ARD_Mega2560R3

4250236812366

ATmega2560

7 - 12 V

6 - 20 V

54 of which 14 PWM

20 mA

50 mA

256 KB

(8 KB for Bootloader)

8 KB

4 KB

16 MHz

101,52 x 53,3 mm

16 MHz Quartz

USB-B Port

ICSP for USB

PIN 13 LED

AREF

GND

PWM

interfaces

TXO

RXO

Communication-

interfaces

Digital I/O Pins

GND

Analog inputs

Power supply

RESET

IOREF

Voltage input

Voltage regulator

ATmega16U2

If you start programming the Joy-IT ARD_Mega2560R3, you have to install a

development environment and the drivers for the associated operating sys-

tem on your computer which is going to be used for programming.

The recommended development environment is the “Arduino IDE“ which is

released by the Arduino manufacturer as an open source soware. This

soware is aimed at beginners, due to concept and structure. It is

compatible to the Joy-IT ARD_Mega2560R3 and has next to the development

environment also the required drivers which make it possible to start

immediately.

The download for this soware can be found with the following link:

https://www.arduino.cc/en/Main/Soware

5. SOFTWARE SETUP

Aer installing the soware, the appropriate microcontroller board must be

set up in the programming environment. To do this follow the next two steps.

1. Select [Tools → Board] choose “Arduino / Genuino Mega or

Mega 2560“

4. SOFTWARE-INSTALLATION

2. Select [Tools → Port] choose the port marked with

„(Arduino / Genuino Mega or Mega 2560)

Product specificaties

Merk:	Joy-it
Categorie:	Niet gecategoriseerd
Model:	ARD MEGA2560R3
Kleur van het product:	Black, White
Gewicht:	62 g
Breedte:	101.52 mm
Diepte:	53.3 mm
Ingangsspanning:	7-12 V
Merkcompatibiliteit:	Arduino
Compatibiliteit:	Arduino
Type product:	Microbesturingseenheid