Joy-it PSG 9080 Handleiding

Joy-it Generator PSG 9080

Lees hieronder de 📖 handleiding in het Nederlandse voor Joy-it PSG 9080 (22 pagina's) in de categorie Generator. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/22
PSG 9080
Programmable signal generator
1. TABLE OF CONTENTS
1. General information
2. Safety instructions
3. Overview front and rear side
4. Function keys
5. Screen overview
6. Basic first steps
7. Modulation mode
8. Measuring mode
9. Sweep mode
10. Voltage Control Mode (VCO)
11. Programming mode
12. System settings
13. Troubleshooting
14. Additional information
15. Support
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In the following, we will introduce you to what to observe while starting up
and using this product.
Should you encounter any unexpected problems during use, please do not
hesitate to contact us.
The PSG9080 function/arbitrary waveform generator can output basic
waveforms (sine wave, square wave, triangle wave, pulse wave and custom
waveforms) from one of the channels individually or both channels simul-
taneously. At start up, the two channels are configured to output a sine -
waveform with a frequency of 10kHz and an amplitude of 5Vpp by default.
Users can configure the unit to output diî ‚erent basic waveforms.
The PSG9080 has these functions: Amplitude, frequency, phase modulati-
on, amplitude shiî … keying, frequency shiî … keying, phase shiî … keying, pulse -
width modulation and burst function. It can measure the frequency, period
and length of input signals and count the periods. It also has a sampling
mode and a voltage control mode.
The button layout and 3.5" colour LCD are intuitive and easy to use. You
can save several settings in groups so you can load them quickly. The
menu can be set in German, English and French.
2. SAFETY INSTRUCTIONS
Please observe the following safety instructions before operating the unit
in order to avoid damage to the unit and the connected devices, as well
as injuries!
The unit is operated with a dangerous voltage,
Never open the casing when it is connected to the power supply.
There is a risk of electric shock!
To avoid short circuiting or electric shock, only use a suitable mains -
cable.
Prevent electrostatic discharges.
Do not supply power to the unit if any connections, wires
or components are exposed.
Do not operate if there is suspected failure or damage to the unit.
Do not operate the unit without covers or with screens removed.
Overvoltages, e.g. from a lightning strike, can damage the unit and cause
electric shocks.
Never use the unit in humid, very dusty environments or near open fire or
chemicals.
Operate the unit only at an ambient temperature between 10 °C and
50°C.
Make sure that the unit is suî ‚iciently ventilated during operation to avoid
overheating. Do not block the ventilation slots or insert any objects.
Check the unit when unpacking it for the first time and before operating
it. If there is any damage to the unit, please contact your supplier or us
directly.


Product specificaties

Merk: Joy-it
Categorie: Generator
Model: PSG 9080

Heb je hulp nodig?

Als je hulp nodig hebt met Joy-it PSG 9080 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Generator Joy-it

Handleiding Generator

Nieuwste handleidingen voor Generator