JLab GO Work Pop Handleiding

JLab Headset GO Work Pop

Lees hieronder de 📖 handleiding in het Nederlandse voor JLab GO Work Pop (2 pagina's) in de categorie Headset. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Press and hold button

for Release. 8 seconds.

Lights will flash blue/red.

b GO Work Pop Connect

GO WORK POP

HEADSET

Turn on Bluetooth in

your device settings.

BLUETOOTH PAIRING

MULTIPOINT (CONNECT 2 DEVICES SIMULTANEOUSLY)

Select “JLab GO Work Pop” in your

device settings to connect.

Once FIRST device is connected,

turn off Bluetooth in device

settings. GO Work Pop will auto

enter Bluetooth Pairing.

Enter your device SECOND

Bluetooth settings and connect

to GO Work Pop.

1Enter your device settings.FIRST

Turn on Bluetooth and reconnect

to GO Work Pop.

We love that you are rocking JLab!

We take pride in our products and fully stand behind them.

YOUR WARRANTY

All warranty claims are subject to JLab authorization

and at our sole discretion. Retain your proof of

purchase to ensure warranty coverage.

Reach out to us at support@jlab.com

or visit jlab.com/contact

jlab.com/register

Product updates How-to tips|

FAQs & more

Bluetooth

Settings

Bluetooth

Settings

JLab GO Work Pop

Bluetooth

Settings

JLab GO Work Pop

Bluetooth

Settings

JLab GO Work Pop Connected

For more info and troubleshooting on MULTIPOINT visit: JLAB.COM/MULTIPOINT

BOOM MICROPHONE

can rotate to left or right side

CHARGING

VOLUME UP: Press once

TRACK FORWARD:

Press and hold 2+ seconds

SWITCH EQ VOICE MUSIC:/

Press and hold both buttons

simultaneously

VOLUME DOWN: Press once

TRACK BACKWARD:

Press and hold 2+ seconds

POWER ON/OFF:

Press and hold 2+ seconds

PLAY/PAUSE/ANSWER/HANG UP CALLS:

Press once

REJECT INCOMING CALL:

Press and hold 1+ second

ACTIVATE SIRI (iOS) OR “OK GOOGLE”

(ANDROID): Press twice

BLUETOOTH PAIRING:

See .Bluetooth Pairing

BUTTON FUNCTIONS

CH NGARGI

Connect to computer or USB 5v 1A

(or less) output device.

CAUTIONS

• Avoid getting moisture or liquids on the headphone cups.

• Avoid extreme heat, cold, and humidity.

• Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.

• Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to

improve the sound quality.

• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.

• If you experience regular discomfort while using this product, discontinue use and consult your physician.

• We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in safe location when not in use.

Shop products Product alerts Burn-in your headphones| |

JLab Store + Burn-in Tool

JLAB.COM

Product specificaties

Merk:	JLab
Categorie:	Headset
Model:	GO Work Pop
Soort bediening:	Knoppen
Kleur van het product:	Blauwgroen
Gewicht:	101 g
Bluetooth:	Ja
Continue audio-afspeeltijd:	50 uur
Bluetooth-versie:	5.3
Bluetooth-profielen:	A2DP, AVRCP, HFP, HSP, SBC
Connectiviteitstechnologie:	Draadloos
Volumeregeling:	Knop
Aantal:	1
Draagwijze:	Hoofdband
Aanbevolen gebruik:	Oproepen/muziek
Headset type:	Stereofonisch
Impedantie:	32 Ohm
Positie speakers koptelefoon:	Supraaural
Frequentiebereik koptelefoon:	20 - 20000 Hz
Aansluitbereik:	10 m
Microfoontype:	Boom
Accu gestuurd:	Ja
Accu/Batterij oplaadtijd:	2.5 uur
Gevoeligheid koptelefoon:	105 dB
USB-aansluiting:	Ja
Oplaadbron:	USB
Diameter van de luidspreker:	40 mm
Soort magneet:	Neodymium
Driver type:	Dynamisch
Type product:	Headset
Type batterij:	Ingebouwde accu
Ingangsspanning (oordopjes):	5 V
MEMS (Micro-Electro-Mechanical System) microfoon:	Ja
Helder geluid:	Ja
Ingangsstroom (oordopjes):	0.5 A