JL Audio SB-POL-SLINGSPKR/M770 Handleiding

JL Audio Speaker SB-POL-SLINGSPKR/M770

Lees hieronder de 📖 handleiding in het Nederlandse voor JL Audio SB-POL-SLINGSPKR/M770 (5 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

Enclosure Type: Sealed

Driver Type: M770-TCS-SG-TB

Nominal Impedance: 4 ohms

Continuous Power Handling: 100 watts (RMS method)

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your

authorized JL Audio dealer. The installation professionals employed by your

dealer have the necessary tools and experience to disassemble and reassemble

your vehicle properly. If you prefer to perform your own installation, please read

this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely

vital that the Stealthbox® be properly mounted to the vehicle

according to these instructions. Failure to mount the enclosure

properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the

enclosure caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a

collision or sudden deceleration.

INSTALLATION

DIFFICULT Y:

ESTIMATED TIME:

1 HOUR

Continued on Next Page

OUT

SB-POL-SLINGSPKR/M770 INSTR_SKU# 011484

I N S T A L L A T I O N G U I D E

for the

SB-POL-SLINGSPKR/M770

SKU# 94636

2017-Up Polaris Slingshot

I N C LUD E D H A R D WAR E

Continued on Next Page

Page 2 • JL Audio, Inc., 2017

SB-POL-SLINGSPKR/M770 INSTR_SKU# 011484

BOM ID DescriptionQty SKU

1 2 153853 M6 - 1 x 25mm Hex Drive Flanged Button Head Screw

2 2 153846 Kick Panel Bracket

3 4 153852 1/4 - 20 x 7/8” Hex Drive Flat Head Screw

4 4 153902 Stainless Steel Cushion Clamp

5 8 153729 1/4 - 20 x 1” Serrated Flange Head Bolt

- 1 150249 Foam Tape (not shown)

Note: For optimum performance, JL Audio recommends applying the included Foam Strips (or sound damping material) to surrounding plastic panels to reduce unwanted vibrations.

123

4 5

(hardware pictured for one)

P O W E R R E C O M M E N D AT I O N

JL Audio recommends high quality ampliers such as the JL Audio MX280/4. The diagram below shows the recommended crossover settings for the MX280/4. For a detailed description of the ampli-

er settings, consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.

C O N N E C T I O N S

Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your

Stealthbox® amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for