JL Audio HD600/4 Handleiding

JL Audio Receiver HD600/4

Lees hieronder de 📖 handleiding in het Nederlandse voor JL Audio HD600/4 (13 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/13

owner’s manual

4-Channel Class-D Full-Range Amplifier

Thank you for purchasing a JL Audio amplifier for

your automotive sound system.

Your amplifier has been designed and manufactured to exacting

standards in order to ensure years of musical enjoyment in your vehicle.

For maximum performance, we highly recommend that you have

your new amplifier installed by an authorized JL Audio dealer. Your

authorized dealer has the training, expertise and installation equipment

to ensure optimum performance from this product. Should you

decide to install the amplifier yourself, please take the time

to read this manual thoroughly so as to familiarize yourself

with its installation requirements and setup procedures.

If you have any questions regarding the instructions in this

manual or any aspect of your amplifier’s operation, please contact your

authorized JL Audio dealer for assistance. If you need further assistance,

please call the JL Audio Technical Support Department

at (954) 443-1100 during business hours.

2 | JL Audio - HD600/4 Owner’s Manual

PROTECT YOUR HEARING!

We value you as a long-term customer. For

that reason, we urge you to practice restraint in

the operation of this product so as not to damage

your hearing and that of others in your vehicle.

Studies have shown that continuous exposure to

high sound pressure levels can lead to permanent

(irreparable) hearing loss. This and all other

high-power amplifiers are capable of producing

such high sound pressure levels when connected

to a speaker system. Please limit your continuous

exposure to high volume levels.

While driving, operate your audio system in

a manner that still allows you to hear necessary

noises to operate your vehicle safely (horns,

sirens, etc.).

SERIAL NUMBER

In the event that your amplifier requires

service or is ever stolen, you will need to

have a record of the product’s serial number.

Please take the time to enter that number in

the space provided below. The serial number

can be found on the bottom panel of the

amplifier and on the amplifier packaging.

Serial Number:

INSTALLATION APPLICATIONS

This amplifier is designed for operation in

vehicles with 12V, negative-ground electrical

systems. Use of this product in vehicles with

positive ground and/or voltages other than 12V

may result in damage to the product and will void

the warranty.

This product is not certified or approved for

use in aircraft.

Do not attempt to “bridge” the outputs of this

amplifier with the outputs of a second amplifier,

including an identical one.

PLANNING YOUR INSTALLATION

It is important that you take the time to read

this manual and that you plan out your

installation carefully. The following are some

considerations that you must take into account

when planning your installation.

Input Sensitivity

Control

(pg. 10)

Power Status

Indicator

(pg. 16)

Filter Mode

Selection

(pg. 11)

Filter Slope

Selection

(pg. 11)

Filter Frequency

Selector

(pg. 11)

Input Mode

Selection

(pg. 9)

Input Voltage

Selection

(pg. 10)

Rear Preouts Remote

Level

Control

Front Inputs

+12 VDC Ground Remote

Chassis Ground

Connector

(pgs. 6-7)

Front Left & Right

Channel Input Jacks

(pg. 9)

Left & Right Preamp

Output Jacks

(pg. 13)

Rear Left & Right

Channel Input Jacks

(pg. 9)

Jack for

Remote Level

Control Knob

(pg. 13)

Remote Turn-On

Connector

(pgs. 6-7)

+12 V Power

Connector

(pgs. 6-7)

4 | JL Audio - HD600/4 Owner’s Manual

ProduCt desCriPtion

The JL Audio HD600/4 is a very powerful

and compact four-channel, full-range amplifier

utilizing patented Single Cycle Control™

Class D technology for all channels. This

groundbreaking technology delivers reference-

grade sonic performance while requiring

far less current from the vehicle’s electrical

system than a conventional amplifier.

JL Audio’s exclusive R.I.P.S. power supply

design optimizes the output of each channel pair

for any impedance between 1.5 and 4 ohms per

channel (3-8 ohms bridged) allowing you to get

full use of the HD600/4’s performance capabilities

with a wide range of speaker systems.

The tightly regulated power supply design also

means that the HD600/4’s clean power output

capability remains stable over a wide range of

vehicle voltages, resulting in enhanced fidelity.

The HD600/4 flexible, studio-grade signal

processing allows it to be deployed in a wide

range of system applications:

1) As a four-channel (150W x 4) full-range

amplifier, delivering full-range signals to two

separate stereo speaker systems (front and rear,

for example).

2) As a powerful (150W x 4) four-channel satellite

amplifier in a bi-amplified system, delivering

high-passed signals to front and rear speaker

systems. Preamp outputs permit connection of a

separate amplifier to drive the subwoofer system.

3) As a 600W full-system amplifier in

bi-amplified mode with one channel pair

driving subwoofers in low-pass mode (150W

x 2 or 300W x 1) and the other channel pair

driving main speakers in high-pass mode

(150W x 2).

4) As a very powerful (300W x 2) full-range

amplifier, delivering full-range signals to a

stereo speaker system.

5) As a very powerful (300W x 2) two-channel

satellite amplifier in a bi-amplified system,

delivering high-passed signals to a stereo

speaker system. Preamp outputs permit

connection of a separate amplifier to drive the

subwoofer system.

6) As a powerful (300W x 2) two-channel

subwoofer amplifier in a bi-amplified system,

delivering low-passed signals to a dual

subwoofer system. Preamp outputs permit

connection of a separate amplifier to drive the

satellite speakers.

The HD600/4’s flexible input and crossover

sections permit operation with a wide variety of

source units and system configurations. It can be

operated with a single pair of stereo inputs or with

separate inputs for its front and rear channels.

The HD600/4’s preamp output can send pass-

through signals from the Front Inputs only or it

can sum all four input channels to feed a non-

fading signal to a separate subwoofer amplifier.

As we said, it’s very flexible.

Product specificaties

Merk:	JL Audio
Categorie:	Receiver
Model:	HD600/4
Kleur van het product:	Zwart, zilver
Breedte:	273 mm
Diepte:	211 mm
Hoogte:	49 mm
Maximaal uitgangsvermogen (RMS):	600 W
Versterker klasse:	D
Aantal versterker kanalen:	4 kanalen
High pass filter:	Ja
Low pass filter:	Ja