JL Audio C7-650cw Handleiding

JL Audio Speaker C7-650cw

Lees hieronder de 📖 handleiding in het Nederlandse voor JL Audio C7-650cw (8 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
OWNER’S MANUAL
6.50-inch (165 mm) Component Woofer
2
3
4
6
5
1
3
DESIGN & TECHNOLOGIES
Cone and Dust Cap:
1
Vacuum-formed, mineral-filled polypropylene
material offers excellent damping and low mass.
The cone body features a gentle curvilinear
profile to optimize response.
2
A specially shaped dust cap attaches to the cone
body and the voice coil former to improve high
frequency behavior.
Suspension Design:
3
The moving assembly is suspended and
damped via a large-diameter, linear profile
spider formed from a Nomex®/polycotton
blend, and a positive-roll, rubber surround. The
two combine to provide optimum damping
without prematurely restricting the C7-650cws
outstanding excursion capability.
Motor Design:
4
The C7-650cw employs a high-density magnetic
circuit with a high-grade Y35 Strontium-ferrite
magnet, and a specially machined, T-Yoke motor
topology. Motor magnetics have been precisely
optimized utilizing advanced FEA tools to
reduce distortion and provide linear motor force
throughout the driver’s performance range.
5
A 32 mm (1.27 inch) diameter, overhung voice
coil is employed, wound with copper wire onto
a fiberglass voice coil former. The oversized
voice coil offers extended power handling
capability, minimizing thermal compression
and distortion at higher listening levels.
Chassis Design:
6
A purpose-engineered cast alloy basket is
employed, featuring thin spokes to maximize
rear open area, and our Patented Elevated
Frame Cooling technology.
Built in USA with Global Components
C7-650cw: 6.5-inch (165 mm) Component Woofer
INTRODUCTION
Thank you for choosing JL Audio C7 loudspeakers
for your automotive sound system. C7 is the
pinnacle of JL Audio loudspeaker design, benefitting
from patented technologies and our most advanced
development tools.
The C7-650cw is a component woofer capable
of operating in a 3-way system, with a midrange
and tweeter, or with only a tweeter in a 2-way
configuration. It has exceptional linear excursion
capability and outstanding linearity, resulting
in solid mid-bass and pure, precise mid-range
performance. Distortion and non-linearities have
been minimized through critical optimization of
dynamic motor and suspension behaviors.
We do not recommend the use of passive
crossover networks with C7 loudspeakers. Instead,
we recommend a high-quality tuning DSP and a
dedicated amplifier channel for each C7 loudspeaker
in the system. Precise setup of equalization, delay
and crossover filters will ensure optimal in-vehicle
performance.
Should you have any questions regarding the
instructions in this manual, please contact your
authorized JL Audio dealer for assistance, or contact
the JL Audio Technical Support Department.
INCLUDED COMPONENT & PARTS
• One (1) C7-650cw 6.50-inch (165 mm) woofer
One (1) die-cast aluminum grille tray
• One (1) fine mesh steel grille
• One (1) spiral steel grille
• One (1) 6.35 mm female crimpable connector
• One (1) 4.7 mm female crimpable connector
Eight (8) #8 x 1.25-inch (32 mm) sheet metal screws
2
C7-650cw: Specifications and Crossover Setting Guidelines
C7650cw SPECIFICATIONS
Speaker Type: Component Woofer
Nominal Diameter: 6.5 in. (165 mm)
Nominal Impedance (Znom): 4 ohms
Continuous Power Handling: 125W
Recommended Amplifier Power: 50-175W (RMS)
Net Weight: 3.28 lbs. (1.49 kg)
Driver Rear Displacement: 0.0135 cu.ft. (0.382 liters)
Min. Recommended Sealed Enclosure:
0.424 cu.ft. (12 liters)
Parameters:
Voice Coil Resistance (Re): 3.114 ohms
Free Air Resonance (Fs): 54.5 Hz
Reference Efficiency (no): 0.304%
Efficiency: 87.0 dB 1W/1m | 93.0 dB @ @ 1W/0.5m
Sensitivity: 90.0 dB @ 2.83V/1m
Electrical “Q” (Qes): 0.669
Mechanical “Q” (Qms): 6.265
Total Speaker “Q” (Qts): 0.605
Equivalent Compliance (Vas): 0.461 cu.ft. (13.05 liters)
Moving Mass (Mms): 17.679 g
Mechanical Compliance (Cms): 0.000482 m/N
Magnetic Strength (BL): 5.31 N/A
Effective Piston Area (Sd): 21.4 sq.in. (0.013807 sq. m)
One-Way Linear Excursion (Xmax): 5 mm
Design Bandwidth:
With 48 dB/octave filters: 50 Hz - 5 kHz
With 24 dB/octave filters: 60 Hz - 5 kHz
With 12 dB/octave filters: 70 Hz - 5 kHz
55
60
65
70
75
80
85
90
95
dB SPL
20 kHz10 kHz5 kHz1 kHz 2 kHz100 Hz50 Hz 200 Hz 500 Hz20 Hz
Sum
Tweeter
Woofer
55
60
65
70
75
80
85
90
95
dB SPL
20 kHz10 kHz5 kHz1 kHz 2 kHz100 Hz50 Hz 200 Hz 500 Hz20 Hz
Sum
Tweeter
MidrangeWoofer
C7 3-Way Speaker System
C7-650cw Woofer
Low-Pass: 24 dB/octave Linkwitz-Riley @ 400 Hz
Level Offset: 0 dB
C7-350cm Midrange
High-Pass: 24 dB/octave Linkwitz-Riley @ 480 Hz
Low-Pass: 24 dB/octave Linkwitz-Riley @ 3500 Hz
Level Offset: 0 dB
C7-100ct Tweeter
High-Pass: 24 dB/octave Linkwitz-Riley @ 4500 Hz
Level Offset: -1.0 dB
Please note: These are recommended starting points
for tuning. In-vehicle measurements should be made to
optimize the crossover for speaker placement and vehicle acoustics.
C7 2-Way Speaker System
C7-650cw Woofer
Low-Pass: 24 dB/octave Linkwitz-Riley @ 2700 Hz
Level Offset: 0 dB
C7-100ct Tweeter
High-Pass: 24 dB/octave Linkwitz-Riley @ 4000 Hz
Level Offset: -1.0 dB
Please note: These are recommended starting points
for tuning. In-vehicle measurements should be made to
optimize the crossover for speaker placement and vehicle acoustics.
3


Product specificaties

Merk: JL Audio
Categorie: Speaker
Model: C7-650cw

Heb je hulp nodig?

Als je hulp nodig hebt met JL Audio C7-650cw stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker JL Audio

Handleiding Speaker

Nieuwste handleidingen voor Speaker