JL Audio 10W3v3-4 Handleiding

JL Audio Autospeaker 10W3v3-4

Lees hieronder de 📖 handleiding in het Nederlandse voor JL Audio 10W3v3-4 (4 pagina's) in de categorie Autospeaker. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

10W3v3-2 / 10W3v3-4 / 10W3v3-8

Subwoofers

o w n e r ’ s m a n u a l

Congratulations on your purchase of a JL Audio subwoofer component. Your JL Audio subwoofer is a

precision loudspeaker which has been engineered to produce the highest quality sub-bass performance

in your vehicle. Authorized JL Audio dealers have extensive technical information for many different

applications of your new speaker. They also have the knowledge, skills and tools to build a high-quality

enclosure that will maximize the performance of your speaker. We highly recommend that you have your

enclosure built by an authorized JL Audio dealer.

Inside you will find specifications and two recommended enclosures for your speaker; one is a sealed

enclosure, the other is a ported design. Both types of enclosures will give you excellent sound quality and

low-frequency extension. The sealed enclosure is a better choice if space is extremely tight, but the ported

enclosure will produce 3dB more output at the same power if you have the extra space to work with.

If you decide to build one of these enclosures yourself, you must have the construction of the box

inspected and approved by your authorized JL Audio dealer in order for the 1 year limited warranty to

be valid. Please read the warranty information carefully.

2 JL AUDIO 10W3v3-2/10W3v3-4/10W3v3-8

SUBWOOFER 10W3v3-2 10W3v3-4 10W3v3-8

Free Air Resonance (Fs): 32.97 Hz 31.49 Hz 32.60 Hz

Electrical “Q” (Qes): 0.533 0.523 0.534

Mechanical “Q” (Qms): 7.027 7.017 6.590

Total Speaker “Q” 0.495 0.485 0.494(Qts):

Equivalent Compliance (Vas): 1.136 ft³

32.17 litres

1.138 ft³

32.23 litres

1.136 ft³

32.17 litres

One-way, Linear Excursion (Xmax)*: 0.550 in.

14.0 mm

0.550 in.

14.0 mm

0.550 in.

14.0 mm

Efficiency (1W/1m)**: 85.37 dB SPL 84.87 dB SPL 85.22 dB SPL

Effective Piston Area (Sd): 53.475 in²

0.0345 m²

53.475 in²

0.0345 m²

53.475 in²

0.0345 m²

DC Resistance (Re): 1.7 ohm 3.567 ohm 7.240 ohm

Nominal Impedance: 2 ohm 4 ohm 8 ohm

Power Handling (continuous): 300W 300W 300W

* Xmax specifications are derived via one-way voice coil overhang method with

no correction factors applied.

** Efficiency (1W/1m) is not an accurate indicator of a subwoofer’s output capability and should

not be used as a comparison to other subwoofers to determine which one is “louder” !

10W3v3 SUBWOOFER PHYSICAL

SPECIFICATIONS

Nominal Diameter: 10.0 in.

250 mm

Overall Diameter (A): 10.5 in.

267 mm

Mounting Hole Diameter (B): 9.0625 in.

230 mm

Bolt Hole Circle (C): 9.7 in.

246.5 mm

Magnet Diameter (D): 5.25 in.

133 mm

Mounting Depth (E): 5.93 in.

151 mm

Net Weight: 12.25 lbs.

5.56 kg

Driver Displacement: 0.049 ft³

1.39 litres

JL AUDIO 10W3v3-2 / 10W3v3-4 / 10W3v3-8

U.S. PATENTS : #5,734,734 #6,501,844 #6,219,431 #D480,709 Other U.S. & Foreign patents pending.

“EL” (Port Extension Length)

10W3v3-2: 11.125 in. (283 mm)

10W3v3-4: 15.5 in. (394 mm)

10W3v3-8: 11.75 in. (298 mm)

10W3v3: 13.75 in. (349 mm)

JL AUDIO 10W3v3-2/10W3v3-4/10W3v3-8 3

SUBWOOFER RECOMMENDED SEALED ENCLOSURES

Volume

(net int.)

External Dimensions

( epth)Width x Height x D

(Hz)

(Hz) Qtc

10W3v3-2 0.625 ft³

17.7 litres

18 in. x 11 in. x 9 in.

457 mm x 279 mm x 229 mm 48.3 55.3 0.831

10W3v3-4 0.625 ft³

17.7 litres

18 in. x 11 in. x 9 in.

457 mm x 279 mm x 229 mm 46.9 52.9 0.818

10W3v3-8 0.625 ft³

17.7 litres

18 in. x 11 in. x 9 in.

457 mm x 279 mm x 229 mm 47.8 54.7 0.829

All specifications are subject to change without notice.

SUBWOOFER RECOMMENDED PORTED ENCLOSURES

Volume

(net int.)

Enclosure External Dimensions

( epth)Width x Height x D

Slot Port Specs

Slot Area x Slot Length

Rec. Slot Port Internal Dimensions

S S H S Llot Width x lot eight x lot ength

Tune to:

(Hz)

10W3v3-2 1.25 ft³

35.4 litres

23 in. x 12 in. x 12.125 in.

584 mm x 305 mm x 308 mm

13.125 sq. in. x 24.75 in.

84.7 sq. cm. x 629 mm

1.25 in. x 10.5 in. x 24.75 in.

32 mm x 267 mm x 629 mm 32.0 31.4

10W3v3-4 1.125 ft³

31.9 litres

23 in. x 12 in. x 13.125 in.

584 mm x 305 mm x 333 mm

13.125 sq. in. x 24.75 in.

84.7 sq. cm. x 629 mm

1.25 in. x 10.5 in. x 28.625 in.

32 mm x 267 mm x 727 mm 31.8 31.7

10W3v3-8 1.25 ft³

35.4 litres

23 in. x 12 in. x 13.75 in.

584 mm x 305 mm x 349 mm

13.125 sq. in. x 24.75 in.

84.7 sq. cm. x 629 mm

1.25 in. x 10.5 in. x 25.5 in.

32 mm x 267 mm x 648 mm 31.7 31.3

! ! CAUTION ! !

Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance

speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.

When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend

bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for

reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important

in a hatchback, station wagon, sports utility vehicle, or van.

• The enclosure recommendations listed are external

dimensions which assume the use of 3/4" (19mm)

thick material. If you are using thick 5/8" (16mm)

material, subtract from each dimension. 1/4" (6.5mm)

Do not use any material with a thickness of less than

5/8" (16mm) as this may compromise the rigidity of

the enclosure.

• All enclosure volumes listed are net internal volumes!

Box volume displacement, port displacement and

brace displacement must be added to obtain the final

gross internal volume. All enclosure dimensions listed

have already taken this into account.

• When using two subwoofers in a common

enclosure simply double the required volume and,

in the case of a ported enclosure, use the two times

recommended port(s).

• We recommend the use of this speaker in a

bi-amplified system using high-quality satellite speakers

and amplifiers. We do not recommend the use of this

subwoofer with a passive crossover (coil), as this type

of device will adversely affect performance.

Product specificaties

Merk:	JL Audio
Categorie:	Autospeaker
Model:	10W3v3-4
Breedte:	267 mm
Diepte:	267 mm
Hoogte:	151 mm
Gemiddeld vermogen subwoofer:	500 W
Frequentiebereik subwoofer:	- Hz
Type product:	Subwoofer-stuurprogramma