JBSystems MCD 1.1 Handleiding

JBSystems CD-speler MCD 1.1

Lees hieronder de 📖 handleiding in het Nederlandse voor JBSystems MCD 1.1 (20 pagina's) in de categorie CD-speler. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

EN - DISPOSAL OF THE DEVICE

Dispose of the unit and used batteries in an environment friendly manner

according to your country regulations.

FR - DÉCLASSER L’APPAREIL

Débarrassez-vous de l’appareil et des piles usagées de manière écologique

Conformément aux dispositions légales de votre pays.

NL - VERWIJDEREN VAN HET APPARAAT

Verwijder het toestel en de gebruikte batterijen op een milieuvriendelijke

manier conform de in uw land geldende voorschriften.

DU - ENTSORGUNG DES GERÄTS

Entsorgen Sie das Gerät und die Batterien auf umweltfreundliche Art und

Weise gemäß den Vorschriften Ihres Landes.

ES - DESHACERSE DEL APARATO

Reciclar el aparato y pilas usadas de forma ecologica conforme a las

disposiciones legales de su pais.

PT - COMO DESFAZER-SE DA UNIDADE

Tente reciclar a unidade e as pilhas usadas respeitando o ambiente e em

conformidade com as normas vigentes no seu país.

ENGLISH USER MANUAL

JB SYSTEMS®1/36 MCD1.1

OPERATION MANUAL

Thank you for buying this JB Systems®product. To take full advantage of all possibilities, please read these

operating instructions very carefully.

FEATURES

This unit is radio-interference suppressed. This appliance meets the requirements of the current European

and national guidelines. Conformity has been established and the relevant statements and documents have

been deposited by the manufacturer.

Full MP3 Playback (max. 999 MP3-files / 255 Folders on 1 CD)

oMPEG1 layer3 (32 + 44,1 + 48kHz)

oMPEG2 layer3 (16 + 22,05 + 24kHz)

oMPEG2.5 layer3 (8 + 11,025 + 12kHz)

Supports both CBR and VBR bit rate modes.

Reads CD-DA, CD-R, CD-RW

Anti-shock Memory 10seconds

1/75sec Frame search, also on MP3

Pitch ranges: +/-8% +/-12% +/-16%, also on MP3

Pitch bend on jog wheel and buttons for perfect mixes

Auto cue function (-48dB)

4 different speed scan

Selectable elapsed, remain and total remain time display

Pitch display.

Single/continuous play

S/PDIF digital output on RCA/cinch

60 seconds Transport Protection

20 tracks program play

BEFORE USE

Check the contents:

Check that the carton contains the following items:

MCD1.1 player

Operating instructions

Pair of cinch cords

SAFETY INSTRUCTIONS:

CAUTION: To reduce the risk of electric shock, do not remove

the top cover. No user-serviceable parts inside. Refer

servicing to qualified service personnel only.

The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use

or the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of

important operation and maintenance (servicing) instructions in the literature accompanying this

appliance.

This symbol means: indoor use only.

This symbol means: Read instructions. This symbol means: Safety Class II

appliance

CAUTION

ENGLISH USER MANUAL

JB SYSTEMS®2/36 MCD1.1

To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when

bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full

performance or may even cause damages.

This unit is for indoor use only.

Don’t place metal objects or spill liquid inside the unit. No objects filled with liquids, such as vases, shall be

placed on this appliance. Electric shock or malfunction may result. If a foreign object enters the unit,

immediately disconnect the mains power.

No naked flame sources, such as lighted candles, should be placed on the appliance.

Don’t cover any ventilation openings as this may result in overheating.

Prevent use in dusty environments and clean the unit regularly.

Keep the unit away from children.

Inexperienced persons should not operate this device.

Maximum save ambient temperature is 40°C. Don’t use this unit at higher ambient temperatures.

Minimum distances around the apparatus for sufficient ventilation is 5cm.

Always unplug the unit when it is not used for a longer time or before you start servicing.

The electrical installation should be carried out by qualified personal only, according to the regulations for

electrical and mechanical safety in your country.

Check that the available voltage is not higher than the one stated on the rear panel of the unit.

The socket inlet shall remain operable for disconnection from the mains.

The power cord should always be in perfect condition. Switch the unit immediately off when the power cord

is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

Never let the power-cord come into contact with other cables!

When the power switch is in OFF position, this unit is not completely disconnected from the mains!

In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user

serviceable parts inside.

Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same

type and electrical specifications!

In the event of serious operating problems, stop using the appliance and contact your dealer immediately.

Please use the original packing when the device is to be transported.

Due to safety reasons it is prohibited to make unauthorized modifications to the unit.

INSTALLATION GUIDELINES:

Install the unit in a well-ventilated location where it will not be exposed to high temperatures or humidity.

Placing and using the unit for long periods near heat-generating sources such as amplifiers, spotlights, etc.

will affect its performance and may even damage the unit.

The unit can be mounted in 19-inch racks. Attach the unit using the 4 screw holes on the front panel. Be

sure to use screws of the appropriate size. (screws not provided)

Take care to minimize shocks and vibrations during transport.

When installed in a booth or flight case, please make sure to have good ventilation to improve heat

evacuation of the unit.

To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when

bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full

performance.

CLEANING THE APPLIANCE:

Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water inside the unit. Do not

use volatile liquids such as benzene or thinner which will damage the unit.

CONNECTIONS

Except for microphones, headphone and zone outputs, all connections are cinch. Use good quality cinch-

cinch cables to prevent bad audio quality.

For more information on connections, please refer to the next chapter.

Be sure to turn off the mixer before you make changes to the different connections.

In this manual we talk about “line inputs”. This is a global name for inputs with a level between 750mV and

2V. This includes tuners, videos, CD-players, etc.

Product specificaties

Merk:	JBSystems
Categorie:	CD-speler
Model:	MCD 1.1

Heb je hulp nodig?

Als je hulp nodig hebt met JBSystems MCD 1.1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding CD-speler JBSystems

JBSystems MCD200 Handleiding

21 Maart 2023

JBSystems cd 570 Handleiding

21 Maart 2023

JBSystems MCD 1.1 Handleiding

21 Maart 2023

Handleiding CD-speler

Nieuwste handleidingen voor CD-speler

Ideen Welt K 1216 N Handleiding

17 Oktober 2023

Tascam CD-RW901MKII Handleiding

8 Oktober 2023

Tascam CD-200iB Handleiding

8 Oktober 2023

Tascam cdrw900 Handleiding

8 Oktober 2023

Tascam CD-RW900MKII Handleiding

8 Oktober 2023

Quadral Aurum C8 Handleiding

11 September 2023

Elta 5786 Handleiding

27 Augustus 2023

Mx Onda MXDM114 Handleiding

6 Augustus 2023

Mx Onda MXDM124 Handleiding

6 Augustus 2023

Mx Onda MXDM117 Handleiding

6 Augustus 2023