JBL SUB140P Handleiding

JBL Subwoofer SUB140P

Lees hieronder de 📖 handleiding in het Nederlandse voor JBL SUB140P (5 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

Included Items

Your new JBL® SUB140P 140-watt powered subwoofer incorpo-

rates an 8" (200mm) down-firing cone transducer and a built-in

high-performance 140-watt amplifier that deliver the powerful,

dynamic and accurate low-frequency performance that makes

your film soundtracks and music come alive. And with line-level

and LFE inputs, adjustable crossover and phase controls and

automatic turn on/off, the SUB140P is also simple to connect

and set up.

We’re confident that this JBL subwoofer will provide every note of

enjoyment that you expect – and that when you think about pur-

chasing additional audio equipment for your home, car or office,

you will once again choose JBL products.

This quick-start guide contains all the information you need to set

up, connect and adjust your new subwoofer. For more in-depth

information, go to our Web site: www.jbl.com.

thank You For choosIng thIs JBl® Product

suB140P

140-Watt, 8" (200mm) Powered Subwoofer

quIck-start guIde

ImPortant saFetY InstructIons

Read these instructions.1.

Keep these instructions.2.

Heed all warnings.3.

Follow all instructions. 4.

Do not use this apparatus near water.5.

Clean only with dry cloth.6.

Do not block any ventilation openings. Install in accordance with the 7.

manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, 8.

stoves, or other apparatus (including ampliﬁers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type 9.

plug. A polarized plug has two blades with one wider than the other.

A grounding-type plug has two blades and a third grounding prong.

The wide blade or third prong is provided for your safety. If the

provided plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly

at the plugs, convenience receptacles and the point where they exit

from the apparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Use only with the cart, stand, tripod, bracket or table

speciﬁed by the manufacturer or sold with the apparatus.

When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualiﬁed service personnel. Servicing is required

when the apparatus has been damaged in any way, such as: when

the power supply cord or plug has become damaged, when liquid has

been spilled or objects have fallen into the apparatus, when the appa-

ratus has been exposed to rain or moisture, when the apparatus does

not operate normally, or the apparatus has been dropped.

15. Do not expose this apparatus to dripping or splashing and ensure

that no objects ﬁlled with liquids, such as vases, are placed on the

apparatus.

16. To completely disconnect this apparatus from the AC mains, discon-

nect the power supply cord plug from the AC receptacle.

17. The mains plug of the power supply cord shall remain readily operable.

18. Do not expose batteries to excessive heat such as sunshine, ﬁre or the

like.

The lightning ﬂash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of

sufﬁcient magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and mainte-

nance (servicing) instructions in the literature accompanying the

product.

WARNING: To reduce the risk of ﬁre or electric shock, do not expose this

apparatus to rain or moisture.

IMPORTANT: THE SUBWOOFER REQUIRES PROPER VENTILATION

AND IS NOT TO BE USED IN AN ENCLOSED ENVIRONMENT.

www.jbl.com

English

suBwooFer rear-Panel controls and connectIons

On/Standby LED: When the Power-On Mode switch is in the “Auto”

position, this LED indicates whether the subwoofer is in the On or Standby

state:

• When the LED glows green, the subwoofer is turned on.

• When the LED glows red, the subwoofer is in the Standby mode.

When the Power switch is set to “Off,” the LED will not light up, no matter

what setting the Power-On Mode switch is in.

Crossover Control: This control determines the highest frequency at

which the subwoofer reproduces sounds. The higher you set the Cross-

over control, the higher in frequency the subwoofer will operate and the

more its bass will “overlap” that of the satellite speakers. This adjust-

ment helps achieve a smooth transition of bass frequencies between the

subwoofer and the satellites for a variety of different rooms and subwoofer

locations.

NOTE: The Crossover control functions only when you are using the Line-

Level In L/R connectors. The Line-Level In LFE connector bypasses the

subwoofer’s built-in crossover and Crossover control.

Phase Switch: This switch determines whether the subwoofer driver’s

piston-like action moves in and out in phase with the satellite speakers. If

the subwoofer were to play out of phase with the satellite speakers, the

sound waves from the satellites could partially cancel out the sound waves

from the subwoofer, reducing bass performance and sonic impact. This

phenomenon depends in part on the placement of all the speakers relative

to each other in the room.

Power-On Mode Switch: When this switch is set in the “Auto” posi-

tion and the Power switch is set to “On,” the subwoofer will automatically

turn itself on when it receives an audio signal and will enter the Standby

mode when it has gone without receiving an audio signal for 20 minutes.

When this switch is set in the “On” position, the subwoofer will remain on

whether or not it is receiving an audio signal.

Subwoofer Level Control: Use this control to adjust the subwoofer’s

volume. Turn the knob clockwise to increase the volume; turn the knob

counterclockwise to decrease the volume.

Line-Level In LFE Connector: This input bypasses the subwoofer’s

internal crossover circuitry, so use it only with a receiver or processor sub-

woofer output that has been low-pass ﬁltered. If your receiver or processor

does not have a dedicated subwoofer output that is low-pass ﬁltered, use

the subwoofer’s Line-Level In L/R Connectors (see below) instead.

Use the supplied mono RCA cable (purple connectors) to connect the

Line-Level In LFE connector to the dedicated subwoofer output of a

receiver or preamp/processor.

Line-Level In L/R Connectors: These inputs pass through the subwoof-

er’s built-in crossover. Use them if your receiver or preamp/processor does

not have a dedicated subwoofer output that is low-pass ﬁltered.

Power Switch: Set this switch in the “On” position to turn the subwoofer

on. The subwoofer will then be in On or Standby mode, depending on the

setting of the Power-On Mode switch.

Power Cord: After you have made and veriﬁed all subwoofer and speaker

connections described in this manual, plug the power cord into an ac-

tive, electrical outlet for proper operation of the subwoofer. unswitched

DO NOT plug this cord into the accessory outlets found on some audio

components.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

Subwoofer

Level Control

Crossover

Control

On/Standby

LED

Phase Switch

Power-On

Mode Switch

Line-Level In

LFE Connector

Line-Level In

L/R Connectors

Power Switch

Power Cord

Product specificaties

Merk:	JBL
Categorie:	Subwoofer
Model:	SUB140P
Kleur van het product:	Zwart
LED-indicatoren:	Stroom
Aan/uitschakelaar:	Ja
Type stroombron:	AC
Meegeleverde kabels:	RCA
Snelstartgids:	Ja
Microfoon, line-in ingang:	Nee
Stroomverbruik (in standby):	1 W
Equalizer-instellingen:	Nee
Gemiddeld vermogen subwoofer:	140 W
Diameter driver subwoofer (imperiaal):	8 "
Lijnuitgang:	Nee
Lijningang:	Ja
Subwoofertype:	Actieve subwoofer
Frequentiebereik subwoofer:	32 - 150 Hz
XLR in:	Nee
Afstandsbediening inbegrepen:	Nee
Aantal subwoofers:	1
AC-ingangsspanning:	220 - 230 V
AC-ingangsfrequentie:	50 Hz
Stroomverbruik (typisch):	300 W
Diameter driver subwoofer:	200 mm
Line inputs (RCA):	2
Crossover subwoofer frequenties:	50 - 200 Hz
Fase controle:	Ja