JBL Stage A100P Handleiding

JBL Subwoofer Stage A100P

Lees hieronder de 📖 handleiding in het Nederlandse voor JBL Stage A100P (5 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 103 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/5
STAGE A100P/A120P
OWNER'S MANUAL
Powered Subwoofer • Caisson de graves actif • Subwoofer alimentado
• Leistungsstarker Subwoofer • Subwoofer alimentato • パワード･サブウー
ファー • 강력한 서브우퍼 • Subwoofer alimentado • Aktiv subwoofer
• Aktiivinen alibassokaiutin • Aktiv subwoofer • Aktiv subwoofer
• Aangedreven subwoofer • Aktywny głosnik niskotonowy • 通電式重低音喇叭
• 有源低音扬声器 • Subwoofer bertenaga • Активный сабвуфер
STAGE A100P/A120P
Powered Subwoofer
A120P/A100P
THANK YOU FOR CHOOSING THIS JBL® PRODUCT
Your new JBL® powered subwoofer incorporates a high-performance
transducer and built-in amplifier that delivers the powerful, dynamic and
accurate low-frequency performance that makes your film soundtracks
and music come alive. And with adjustable crossover, phase controls
and automatic turn on/off, it is also simple to connect and set up.
We're confident that this JBL subwoofer will provide every note of
enjoyment that you expect – and that when you think about purchasing
additional audio equipment for your home, car or office, you will once
again choose JBL products.
This quick-start guide contains all the information you need to set up,
connect and adjust your new subwoofer. For more in-depth information,
go to our web site: www.jbl.com.
INCLUDED ITEMS
4X
1X
Note: Type of power plug varies by regions.
OWNER'S MANUAL
2
SUBWOOFER REAR-PANEL CONTROLS AND CONNECTION
1) Power Mode:
When switched to 'Auto' position, the subwoofer will then be in Standby
mode. It will automatically turn on when an audio signal is detected
and will return to the Standby mode when no audio signal is detected
after approximately 10 minutes. Setting this switch to 'On' keeps the
subwoofer powered until Power Switch is turned 'Off.'
2) On/Standby LED:
When the Power Switch is in the 'On' position, this LED indicates whether
the subwoofer is in the On or Standby state.
• When the LED glows blue, the subwoofer is turned On.
• When the LED glows red, the subwoofer is in the Standby mode.
3) Phase Switch:
This switch determines whether the subwoofer transducer's piston-
like action moves in and out in phase with the main speakers. If the
subwoofer were to play out of phase with the main speakers, the sound
waves from the main speakers could partially cancel out the sound waves
from the subwoofer, reducing bass performance and sonic impact. This
phenomenon depends in part on the placement of all the speakers relative
to the listening position and to each other in the room.
4) Crossover Control:
This control determines the highest frequency at which the subwoofer
reproduces sounds. The higher you set the Crossover control, the higher
in frequency the subwoofer will operate and the more its bass will “overlap”
that of the speakers. This adjustment helps achieve a smooth transition of
bass frequencies between the subwoofer and the speakers for a variety of
different rooms and subwoofer locations.
5) Volume:
Use this control to adjust the subwoofer's volume. Turn the knob
clockwise to increase the volume; turn the knob counterclock-wise to
decrease the volume.
6) Subwoofer (LFE Input):
Connect the subwoofer to the dedicated subwoofer / LFE output of a
receiver/processor.
7) Power Switch:
Set this switch in the 'On' position to turn the subwoofer on. If you will
be away from home, or will not be using the subwoofer for an extended
period, set this switch in the 'Off' position to conserve energy.
8) Power Input:
After you have made and verified the subwoofer's input connection, plug
the power cord into an active, unswitched electrical outlet for proper
operation of the subwoofer.
DO NOT plug the power cord into the accessory outlets found on some
audio components.

Product specificaties

Merk: JBL
Categorie: Subwoofer
Model: Stage A100P

Heb je hulp nodig?

Als je hulp nodig hebt met JBL Stage A100P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Subwoofer JBL

JBL

JBL Power P1022 Handleiding

12 December 2024
JBL

JBL Power P1222 Handleiding

12 December 2024
JBL

JBL BassPro SL2 Handleiding

8 December 2024
JBL

JBL W10GTi Handleiding

25 November 2024
JBL

JBL Venue SUB12 Handleiding

25 November 2024
JBL

JBL W10GTi II Handleiding

25 November 2024
JBL

JBL W12GTi Handleiding

25 November 2024
JBL

JBL Venue SUB10 Handleiding

25 November 2024
JBL

JBL SUB135 Handleiding

25 November 2024
JBL

JBL Power P1042 Handleiding

25 November 2024

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer

Pioneer

Pioneer TS-A25S4 Handleiding

13 December 2024
Pioneer

Pioneer TS-A30S4 Handleiding

13 December 2024
Pioneer

Pioneer TS-A120S4E Handleiding

13 December 2024
ButtKicker

ButtKicker BK-LFE Handleiding

10 December 2024
Infinity

Infinity TSS-SUB750 Handleiding

9 December 2024
Infinity

Infinity TSS-SUB4000 Handleiding

9 December 2024
Infinity

Infinity Reference SUB R12 Handleiding

9 December 2024
AudioSource

AudioSource PSW110 Handleiding

9 December 2024
AudioSource

AudioSource PSW112 Handleiding

9 December 2024
Klipsch

Klipsch Reference RW-5802 II Handleiding

8 December 2024