JBL Stage 220P Handleiding

JBL Subwoofer Stage 220P

Lees hieronder de 📖 handleiding in het Nederlandse voor JBL Stage 220P (32 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/32
STAGE 200P/220P
Powered Subwoofer • Caisson de graves actif • Subwoofer ativo
• Leistungsstarker Subwoofer • Subwoofer alimentato • パワード ･ サブ
ウーファー • 강력한 서브우퍼 • Subwoofer alimentado • Aktiv subwoofer
• Aktiivinen alibassokaiutin • Aktiv subwoofer • Aktiv subwoofer
• Aangedreven subwoofer • Aktywny głosnik niskotonowy • 有源低音炮
•有源低音揚聲器 • Subwoofer bertenaga • Активный сабвуфер
STAGE 200P/220P
THANK YOU FOR CHOOSING THIS JBL® PRODUCT
INCLUDED ITEMS
Powered Subwoofer
200P/220P
Your new JBL® powered subwoofer incorporates a high-performance
transducer and built-in amplifier that delivers the powerful, dynamic and
accurate low-frequency performance that makes your film soundtracks
and music come alive. And with adjustable crossover, phase controls and
automatic turn on/off, it is also simple to connect and set up.
We're confident that this JBL subwoofer will provide every note of enjoyment
that you expect - and that when you think about purchasing additional audio
equipment for your home, car or office, you will once again choose JBL
products.
This quick-start guide contains all the information you need to set up,
connect and adjust your new subwoofer. For more in-depth information, go
to our web site: www.jbl.com.
Note: Type of power plug varies by regions.
2
SUBWOOFER REAR-PANEL CONTROLS AND CONNECTION
输入
P ER ~ 5WOW AC 20
1) Power Mode:
When switched to 'Auto' position, the subwoofer will then be in Standby
mode. It will automatically turn on when an audio signal is detected
and will return to the Standby mode when no audio signal is detected
after approximately 15 minutes. Setting this switch to 'On' keeps the
subwoofer powered until the power cord is pulled out.
In 'Standby' mode, the power consumption is lower than 0.5W.
2) Power Mode Indicator:
When the Power Indicator is in the 'On' position, this LED indicates
whether the subwoofer is in the On or Standby state.
• When the LED glows , the subwoofer is turned On.blue
• When the LED glows , the subwoofer is in the Standby mode.red
3) Phase Switch:
This switch determines whether the subwoofer transducer's piston-
like action moves in and out in phase with the main speakers. If the
subwoofer were to play out of phase with the main speakers, the sound
waves from the main speakers could partially cancel out the sound
waves from the subwoofer, reducing bass performance and sonic impact.
This phenomenon depends in part on the placement of all the speakers
relative to the listening position and to each other in the room.
4) Crossover Control:
This control determines the highest frequency at which the subwoofer
reproduces sounds. The higher you set the Crossover control, the
higher in frequency the subwoofer will operate and the more its bass will
"overlap" that of the speakers. This adjustment helps achieve a smooth
transition of bass frequencies between the subwoofer and the speakers
for a variety of different rooms and subwoofer locations.
5) Volume:
Use this control to adjust the subwoofer's volume. Turn the knob
clockwise to increase the volume; turn the knob counterclock-wise to
decrease the volume.
6) Subwoofer (LFE Input):
Connect the subwoofer to the dedicated subwoofer / LFE output of a
receiver/processor.
7) Main Voltage Selector Switch:
Set this switch up to select voltage 220-240V.
Set this switch down to select voltage 100-120V.
Noted: Must select correct mains voltage before power cord plug in.
8) Power Input:
After you have made and verified the subwoofer's input connection, plug
the power cord into an active, unswitched electrical outlet for proper
operation of the subwoofer.
DO NOT plug the power cord into the accessory outlets found on some
audio components.

Product specificaties

Merk: JBL
Categorie: Subwoofer
Model: Stage 220P

Heb je hulp nodig?

Als je hulp nodig hebt met JBL Stage 220P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Subwoofer JBL

JBL

JBL Power P1022 Handleiding

12 December 2024
JBL

JBL Power P1222 Handleiding

12 December 2024
JBL

JBL BassPro SL2 Handleiding

8 December 2024
JBL

JBL W10GTi Handleiding

25 November 2024
JBL

JBL Venue SUB12 Handleiding

25 November 2024
JBL

JBL W10GTi II Handleiding

25 November 2024
JBL

JBL W12GTi Handleiding

25 November 2024
JBL

JBL Venue SUB10 Handleiding

25 November 2024
JBL

JBL SUB135 Handleiding

25 November 2024
JBL

JBL Power P1042 Handleiding

25 November 2024

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer

Pioneer

Pioneer TS-A25S4 Handleiding

13 December 2024
Pioneer

Pioneer TS-A30S4 Handleiding

13 December 2024
Pioneer

Pioneer TS-A120S4E Handleiding

13 December 2024
ButtKicker

ButtKicker BK-LFE Handleiding

10 December 2024
Infinity

Infinity TSS-SUB750 Handleiding

9 December 2024
Infinity

Infinity TSS-SUB4000 Handleiding

9 December 2024
Infinity

Infinity Reference SUB R12 Handleiding

9 December 2024
AudioSource

AudioSource PSW110 Handleiding

9 December 2024
AudioSource

AudioSource PSW112 Handleiding

9 December 2024
Klipsch

Klipsch Reference RW-5802 II Handleiding

8 December 2024