JBL MTC-2P Handleiding

JBL luidsprekersteun MTC-2P

Lees hieronder de 📖 handleiding in het Nederlandse voor JBL MTC-2P (1 pagina's) in de categorie luidsprekersteun. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/1
8500 Balboa Boulevard
Northridge, CA 91329 USA
Visit us online at www.jblpro.com
A. Screw the metal rod/ball assembly ( ) into the threaded insert ( ) on the 1 2
back of the cabinet ( ) until it is seated against the bottom of the insert.8
B. Next, tighten the “knurled” nut ( ) with a small wrench 3
( ) until it is seated against the back of the cabinet. Tighten the nut 9
until it has “locked” the rod/ball assembly ( ) to the cabinet. Note: the 1
nut may leave marks on the back of the cabinet where the attachment
is made however, the flange of the nut will cover these marks.
C: Mount the wall bracket plate ( ) onto a flat sturdy surface using the 4
appropriate mounting hardware for the surface. A safety cable ( ) 5
(not included) may be attached to the wall bracket via its eyelet ( ) at one of the 6
two lower screw mounting points or to a secondary point off the mounting plate.
D. Next, slip the large molded nut ( ) over the ball on the metal rod/ball assembly ( ). 7 1
E. Holding the cabinet ( ) with both hands, insert the ball on the metal rod/ball assembly ( ) into the cup of the wall plate ( ).8 1 4
F. Orient the speaker into the desired position and hand tighten the molded nut ( ). Once the orientation is finalized, 7
use the metal bar ( ) in one of the holes on the molded nut ( ) to securely tighten.9 7
NOTE: Over tightening can damage the nut. Tighten using the supplied bar and hand-force only. Use of additional tools
such as pliers to tighten the nut will void the warranty.
G. Clip the safety cable to the cabinet's safety bar ( ) on the back of the cabinet.10
H. Mount the power supply holder onto a flat sturdy surface using the appropriate
mounting hardware for the surface. The holder should be oriented horizontally
or vertically with the spring clip ( ) on top. Choose a location in11
proximity to a power out let so the power cable will reach the outlet.
I. Insert the power supply as far as it will go into the holder until
the retaining clip ( ) prevents removal of the power supply. 11
J. Connect the power cable to the power outlet.
* :NOTE When MTC-2P Brackets are installed in mobile vehicles, vibration and sudden movement may cause a shift in position, requiring re-adjustment.
* : CAUTION Unsafe mounting or overhead suspension can result in serious injury and equipment damage. Mounting of speakers should be done by qualified personsin accordance with all applicable local safety and
construction standards. Be certain to follow the instructions provided by the manufacturer of the mounting bracket. Before selecting a mounting bracket, be certain it is capable of supporting the weight of the speaker.
MTC-2P Mounting Brackets
for use with
CONTROL 2P
Compact Powered Reference Monitors
MTC-2P Mounting Brackets included in the MTC-2P Mounting Kit are designed to allow safe mounting of Control 2P Compact
Powered Reference Monitors and the outboard power supply to a suitable mounting surface.
8
2
3
7
1
4
9
5
6
10
The MTC-2P Mounting Kit contains the following items:
2 MOUNTING BRACKET ASSEMBLIES
1 POWER SUPPLY HOLDER
1 WRENCH
(Safety Cable not included)
To mount a Control 2P speaker and the power supply follow these instructions:
®
11
JBL Professional Contact Information Mailing Address:
JBL Professional 8500 Balboa Blvd. Northridge, CA 91329
Shipping Address:
JBL Professional 8370 Balboa Blvd., Dock D Northridge, CA 91329
Customer Service:
Monday through Friday | 8:00am - 5:00pm
Pacific Coast Time in the USA
(800) 8JBLPRO (800.852.5776)
www.jblproservice.com
On the World Wide Web:
www.jblpro.com
Outside the USA: Contact the JBL Professional Distributor in your area. A complete list of
JBL Professional international distributors is provided at our U.S.A.website -www.jblpro.com
En Dehors des Etats-Unis: Contacter votre Distributeur JBL Professional. Une liste c
omplète de nos distributeurs internationaux est disponible sur le site web www.jblpro.com
International: Wenden Sie sich an Ihre örtliche JBL Professional Vertretung. Eine
vollständige Liste der internationalen JBL-Vertretungen fi nden Sie auf userem Website
unter www.jblpro.com
Fuera de los Estados Unidos: Comuníquese con el distribuidor de JBL Professional de
su zona. En nuestro sitio web, www.jblpro.com, encontrará una lista completa de los
distribuidores de JBL International.
P/N 4409747-001 0608 REV A
Francais, Deutsch, Espanol, information at www.jblpro.com
Control 2P Power Supply
Power Supply Holder
MTC2.instructions.111313_Layout 1 11/13/13 11:36 AM Page 1

Product specificaties

Merk: JBL
Categorie: luidsprekersteun
Model: MTC-2P

Heb je hulp nodig?

Als je hulp nodig hebt met JBL MTC-2P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding luidsprekersteun JBL

JBL

JBL MTC-2P Handleiding

22 Maart 2023

Handleiding luidsprekersteun

Nieuwste handleidingen voor luidsprekersteun

Extron

Extron V-Lock Handleiding

6 September 2024
Extron

Extron SMK VRE 48 Handleiding

6 September 2024
Sanus

Sanus BSWM3IWP Handleiding

5 September 2024
Sanus

Sanus WSWM3IWP Handleiding

5 September 2024
Valcom

Valcom V-9915M Handleiding

5 September 2024
Valcom

Valcom V-9912M Handleiding

5 September 2024
Valcom

Valcom V-9910 Handleiding

5 September 2024
Valcom

Valcom V-9904M-5 Handleiding

5 September 2024
Valcom

Valcom V-9806 Handleiding

5 September 2024
Valcom

Valcom V-936480 Handleiding

5 September 2024