JBL GTO-3EZ Handleiding

JBL Receiver GTO-3EZ

Lees hieronder de 📖 handleiding in het Nederlandse voor JBL GTO-3EZ (13 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 92 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/13

Owner’s Manual

GTO-5eZ/GTO-3eZ

power ampliﬁer

why yOu shOuld Pay aTTenTiOn TO This Owner’s Manual

The performance of your vehicle’s audio system depends as much on quality installation and setup as it does on

quality gear. Of course, these new JBL® GTO amplifiers are bulletproof performers that are built using the highest

quality components, and will outperform any competing product on the test bench. To make sure you extract all

the performance possible from your new amp, whether you install it yourself or have a professional install it for you,

we’ve incorporated some new features that make setup simple and precise and ensure you get all the power and

performance you’ve paid for.

WHAT MAKES THESE AMPLIFIERS DIFFERENT

All amplifiers include some signal processing functions, level setting controls and other switches and connectors that

make it possible to hook the amp up to just about any existing system. However, with many amplifiers, considerable

technical expertise is required to make the best use of those connectors, switches and controls to get powerful noise-

free sound. JBL GTO amplifiers include Simple Setup designed to make it easy for you to get all the noise-free power

your amp is capable of delivering.

WHAT MAKES INPUT SETUP EASY

GTO Amplifiers include adapters for connecting almost any analog signal and feature built-in Gain Indicator LEDs and

a setup CD that makes precision adjustment simple, no matter your level of experience. The setup of GTO amplifiers is

a little different than amplifiers you may have installed in the past, so please read this owner’s manual before you

begin. If you’re an experienced installer, skipping ahead is OK, but please don’t skip on Setup Procedure,

page 8.

So we can better serve you should you require warranty service, please retain your original sales receipt and register

your GTO-5EZ or GTO-3EZ online at www.jbl.com.

included iTeMs

The following items are included in the packaging. If any of these items are missing, please contact your authorized

JBL dealer, or JBL customer service at www.jbl.com.

Setup CD

GTO Series

Ampliﬁer

Bare Wire-to-RCA Adapters

(5 in GTO-5EZ; 3 in GTO-3EZ)

lOcaTiOn and MOunTinG

INSTALLATION WARNINGS AND TIPS

IMPORTANT: Disconnect the vehicle’s negative (–) battery terminal before beginning the installation.

• Always wear protective eyewear when using tools.

• Check clearances on both sides of a planned mounting surface. Be sure that screws or wires will not puncture

brake lines, fuel lines or wiring harnesses, and that wire routing will not interfere with the safe operation of the

vehicle.

• When making electrical connections, make sure they are secure and properly insulated.

• If you must replace any of the GTO-5EZ/GTO-3EZ’s fuses, be sure to use the same type of fuse and current rating

as that of the original.

INSTALLATION LOCATION

Amplifiers need air circulation to stay cool. Select a location that provides enough air for the amp to cool itself.

• Suitable locations are under a seat (provided the amplifier doesn’t interfere with the seat adjustment mechanism),

in the trunk, or in any other location that provides enough cooling air.

• Do not mount the amplifier with the heatsink facing downward, as this interferes with the amplifier’s convection

cooling.

• Mount the amplifier so that it will not be damaged by the feet of backseat passengers or shifting cargo in the trunk.

• Mount the amplifier so that it remains dry – never mount an amplifier outside the car or in the engine compartment.

www.jbl.com

English

MOUNTING THE AMPLIFIER

NOTE: You may find it more convenient to make all of the connections to the amplifier before you permanently mount

it to the vehicle.

Before mounting the amplifier you must remove the two end caps to expose the mounting holes and the connections.

Using a Phillips screwdriver, remove the attachment screws and then the end caps, as shown in the illustration. Put

the screws in a safe place, so you can use them to reattach the end caps after you have made all the connections to

the amplifier.

NOTE: Before you permanently mount the amplifier, read below, to determine the setting of the Auto Turn-On Switch,

switch, which is located on the amplifier’s bottom panel.

1. Select a suitable mounting location as described above.

2. Using the amplifier as a template, mark the locations of the mounting holes on the mounting surface.

3. Drill pilot holes in the mounting surface.

4. Attach the amplifier to the mounting surface with four appropriate mounting screws of your own choice. We

suggest using #8 Phillips-head sheet metal screws. Make sure the amplifier is mounted securely.

cOnnecTiOns

IMPORTANT: Disconnect the vehicle’s negative (–) battery terminal before beginning the installation.

If you have not already done so, remove the two end caps that cover the amplifier’s connectors as explained in

Mounting the Amplifier, above. This will provide easier access to all of the amplifier’s connectors.

AUTO TURN-ON SWITCH

No remote turn-on connection is necessary because GTO amplifiers include signal-sensing turn-on, which will turn

the amplifier on when it receives an audio signal at any of its input connectors. The amplifier will automatically turn off

approximately five minutes after the input signal ceases.

If your audio system’s source unit includes a remote turn-on wire and you would prefer to use it, the amplifier

will sense that you’ve used a remote turn-on wire and that connection will override the signal-sensing turn-on. If

necessary, you can defeat the signal-sensing turn-on circuit by moving the Auto Turn-On switch to the “Off” position.

Product specificaties

Merk:	JBL
Categorie:	Receiver
Model:	GTO-3EZ
Kleur van het product:	Zwart
Gewicht:	4100 g
Breedte:	302 mm
Diepte:	246 mm
Hoogte:	66 mm
Connectiviteitstechnologie:	Bedraad
DC voltage input:	14.4 V
Bedoeld voor:	Auto
Audio-uitgangskanalen:	3.0 kanalen
Frequentiebereik:	50 - 280 Hz
Signaal/ruis-verhouding:	- dB
Totale harmonische vervorming (THD):	1 procent
Piekvermogen per kanaal:	- W
Speakers connectiviteit type:	RCA
RMS vermogen uitvoer per kanaal (4 Ohm):	350 W
RMS vermogen uitvoer per kanaal (2 Ohm):	1050 W
Bass boost:	0 - 12 dB