Janome MC6500 Professional Handleiding

Janome Naaimachine MC6500 Professional

Lees hieronder de 📖 handleiding in het Nederlandse voor Janome MC6500 Professional (78 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/78
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be followed, including the
followings:
Read all instructions before using this appliance.
DANGERTo reduce the risk of electric shock:
1. An appliance should never be left unattended when plugged in. Always unplug this sewing machine
from the electric outlet immediately after using and before cleaning.
2. Always unplug before replacing a sewing machine bulb. Replace bulb with same type rated 12 Volts,
5 Watts.
WARNING reduce the risk of burns, fire, electric shock, or injury to persons:To
1. Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by
or near children.
2. Use this appliance only for its intended use as described in this owner’s manual.
Use only attachments recommended by the manufacturer as contained in this owner’s manual.
3. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it
has been dropped or damaged, or dropped into water.
Return this sewing machine to the nearest authorized dealers or service center for examination,
repair, electrical or mechanical adjustment.
4. Never operate the appliance with any air opening blocked. Keep ventilation openings of this sewing
machine and foot controller free from accumulation of lint, dust and loose cloth.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
8. To disconnect, turn all controls to the off (“O”) position, then remove plug from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10. Keep fingers away from all moving parts. Special care is required around the sewing machine
needle.
11. Always use the proper needle plate. The wrong plate can cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
14. Switch this sewing machine off (“O”) when making any adjustment in the needle area, such as
threading the needle, changing the needle, threading the bobbin or changing the presser foot, and
the like.
15. Always unplug this sewing machine from the electrical outlet when removing covers, lubricating, or
when making any other adjustments mentioned in this owner’s manual.
SAVE THESE INSTRUCTIONS
The design and specifications are subject to change without a prior notice.
1
KNOW YOUR MACHINE .................................. 3
Name of Parts ........................................................... 3
Standard Accessories ............................................... 4
GETTING READY TO SEW ............................. 5
Connecting the Power Supply .................................. 5
Controlling Sewing Speed ........................................ 5
Speed control lever ....................................................... 5
Foot control ................................................................... 5
Function Buttons....................................................... 6
Pattern selection buttons .................................................. 8
Raising and Lowering the Presser Foot ................... 9
Attaching the Knee Lifter .......................................... 9
Changing the Presser Foot ..................................... 10
Detaching and Attaching the Foot Holder ............... 10
Variety of Presser Feet and Their Uses.................. 11
Winding the Bobbin ................................................ 12
Removing the bobbin .................................................. 12
Setting the spool of thread .......................................... 12
Winding the bobbin ..................................................... 13
Inserting the bobbin .................................................... 14
Threading the Machine ........................................... 15
Automatic Needle Threader.................................... 17
Drawing Up the Bobbin Thread .............................. 18
Changing Needles .................................................. 19
Thread and Needle Chart ....................................... 19
Balancing Thread Tension ...................................... 20
Adjusting the tension .................................................. 20
Adjusting the Foot Pressure ................................... 21
Dropping the Feed Dog .......................................... 21
Selecting the Sewing Mode .................................... 22
The Help Button...................................................... 23
Selecting the Pattern .............................................. 23
Customizing Machine Settings ............................... 24
Resumption setting ..................................................... 24
Sound setting .............................................................. 24
Language selection ..................................................... 24
BASIC STITCHES (Mode 1).................................... 25
Straight Stitch ......................................................... 25
To sew ........................................................................ 25
To sew from the edge of thick fabric .......................... 25
Securing seam ........................................................... 25
Changing sewing direction ......................................... 26
Using the cloth guide ................................................. 26
Using the seam guide lines ........................................ 26
Adjusting the needle drop position ............................. 27
Adjusting the stitch length .......................................... 27
Variety of the straight stitches .................................... 28
Basting ................................................................... 29
Zigzag Stitch .......................................................... 30
Adjusting the stitch width ........................................... 30
Adjusting the stitch length .......................................... 30
Variety of Overcasting Stitches (Modes 1 and 3) ....... 31
Overcasting with zigzag stitch .................................... 31
Overcasting stitch ...................................................... 31
Multiple zigzag stitch (Tricot stitch) ............................ 31
Knit stitch ................................................................... 32
Double overedge stitch .............................................. 32
Overlock stitch ........................................................... 32
Zipper Sewing ........................................................ 33
Fabric preparation ...................................................... 33
To sew ........................................................................ 34
Rolled Hem .............................................................36
PATCHWORK AND QUILTING (Mode 2) ............ 37
Patchwork ...............................................................37
Angle scale on the needle plate ...................................... 37
Seaming patchwork pieces ............................................. 37
Patchwork stitches .......................................................... 37
Stitch in the ditch with the even feed foot........................ 38
Quilting ................................................................... 38
Quilting bar for the even feed foot .............................. 38
Quilting bar for the zigzag foot ................................... 39
Clasp stitch ................................................................ 40
Applique ..................................................................... 40
Programming French Knots ................................... 41
TABLE OF CONTENTS


Product specificaties

Merk: Janome
Categorie: Naaimachine
Model: MC6500 Professional

Heb je hulp nodig?

Als je hulp nodig hebt met Janome MC6500 Professional stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Naaimachine Janome

Handleiding Naaimachine

Nieuwste handleidingen voor Naaimachine