Janome DC1050 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Janome DC1050 (29 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/29
SERVICE MANUAL
DC1050
INDEX
What to do when................................................................................................................................ 1 - 3
Changing External Parts
Face Cover 4 ..............................................................................................................................................
Free-arm Cover 5 ......................................................................................................................................
Front Cover........................................................................................................................................ 6 - 7
Rear Cover 8 ..............................................................................................................................................
Mechanical Adjustment
Presser Bar Height 9 ..................................................................................................................................
Needle Drop Position.............................................................................................................................10
Adjustment of Hook Timing....................................................................................................................11
Replacing Hook 12 .....................................................................................................................................
Adjustment of Needle Bar Height 13 ..........................................................................................................
Clearance between Needle and Tip of Hook Rotary 14 .............................................................................
Feed Dog Height 15 ...................................................................................................................................
Top Tension ...........................................................................................................................................16
Replacing the Electronic Components
Circuit Board-A Connection 17 ...................................................................................................................
Self-diagnostic Test ......................................................................................................................... 18-22
Circuit Board-A ................................................................................................................................ 23-24
Driving Motor 25 .........................................................................................................................................
Switching Regulator Unit 26 .......................................................................................................................
Adjusting Buttonhole Lever Position 27 ......................................................................................................
Parts List 28-41 .......................................................................................................................................
1
Condition Cause How to fix RefeRenCe
1. Skipping
StitcheS
1. needle iS not inSerted
properly.
2. needle iS bent or worn.
3. incorrectly threaded.
4. needle or thread are
inappropriate for the
fabric being Sewn.
5. Sewing on
Stretch fabric.
6. inappropriate needle
bar height.
7. inappropriate needle to
hook timing.
8. inappropriate needle to
hook clearance.
9. hook iS broken or too
worn.
inSert the needle properly.
change the needle.
rethread.
USe the recommended Sewing
needle and thread.
USe a ha x #11 blUe tip needle.
See mechanical adjUStment
“needle bar height”.
See mechanical adjUStment “ad-
jUStment of hook timing”.
See mechanical adjUStment
“clearance between needle
and tip of the rotary hook”.
See “replacing hook”
p. 13
p. 11
p. 14
p. 12
2. fabric not
moving
1. incorrect feed dog
height.
2. feed dog iS in down
poSition.
3. thread on bottom Side of
fabric iS jammed Up.
4. feed dog teeth are worn.
adjUSt the preSSer bar level
to make the preSSUre Stron-
ger. See mechanical adjUSt-
ment “feed dog height”.
raiSe the feed dog.
make SUre to bring both needle
and bobbin threadS Under the
foot when Start Sewing.
change the feed dog.
p. 15
wHat to do wHen


Product specificaties

Merk: Janome
Categorie: Naaimachine
Model: DC1050

Heb je hulp nodig?

Als je hulp nodig hebt met Janome DC1050 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Naaimachine Janome

Handleiding Naaimachine

Nieuwste handleidingen voor Naaimachine